Bihui TEXTURE SCVU8 Parts list manual

www.bihuitools.com

Vacuum Suction Cup
WARRANTY
Read before use
Usage Instructions
SCVU8

2. Application
- For carry large porcelain or stone tiles and glass, even for rough surfaces
Read all safety instructions and warnings provided. Failure to follow
the instructions below may result in serious injury.
Keep all warnings and instructions for future reference.
Safety warnings from the manufacturer
- Ensure surface of to be lifted material is dry and clean.
- Check vacuum cups for damage or perishing or glazing.
- NEVER use the lifer to support a person.
- NEVER use the liter when the red line on the plunger is visible.
- NEVER attach ropes or chains directly to handle. Lifter is for hand
lifting tasks only.
- NEVER touch the thumb release plate during lifting.
- NEVER interfere with free movement of the plunger during lifting
- Use within range: -12 to 49℃(10 to 120 F)
- Use below 1524 metre (5000 feet) elevation.
If there is any question about a condition being safe or
unsafe. DO NOT use the product.
3. Using Instruction
- Press black plunger into handle by palm thoroughly, using ENOUGH
pressure for sealing rings to come in full contact.
- Start to use the pump until plunger stays in-well beyond the red
indicator line* or the pressure monitor clock shows within the green area.
* The red indicator line or monitor clock in red area during lift indicates gradual
loss of vacuum suction and need to re-pumping.
- To release, apply pressure to the thumb release plate toward the
handle until the lifter releases suction then remove it away from the material.
Caution
!
1. Safety Warnings

4. Cleaning and Maintenance
- To remove glaze from rubber pad, scrub with cloth soaked in soapy
water. Keep it down to prevent liquid getting inside.
- If pump leaks, remove plunger and wipe surrounding surfaces and
handle interior with soft, lint free cloth.
- Re-coat rubber cup with SILICONE GREASE (rubber grease) ONLY.
NEVER use oil based lubricants.
- NEVER use solvent to clean lifer.
- NEVER lay face down on rough/contaminated surface.
- Store in carry case. Ensure lifter well-placed.
5. Regular Inspection
Periodically test for:
- excessive leakage, sluggish pump action, increase in pumping
required for full evacuation.
- Examine handle and plunger for cracks.
- Examine rubber pad for: excessive glaze, powder, dirt, oil, cuts,
damage/perishing, roughness.
6. Warranty
- The guarantee covers all manufacturing or assembly defects in
accordance with the legislation in force. The guarantee does not cover
malfunctions caused by improper use, overloads, failure to follow
the operating instructions and normal wear and tear.
- For more detials and information, consult the general guarantee
conditions at www.bihuitools.com