BIK BJ-U500 User manual

使用说明书
OWNER'S MANUAL
Thank you for purchasing our UHF WIRELESS MICROPHONE SYSTEM.
Please read the owner's manual thoroughly prior to use.
Please keep the manual for future reference.
UHF WIRELESS MICROPHONE SYSTEM
UHF无线麦克风系统
感谢您购买本公司的 UHF无线麦克风系统 。
为了尽快的熟悉掌握本产品的各项功能，使用前请仔细阅读本说明书。
阅读后，请注意妥善保管。
UHF Wireless Microphone System
VOL - VOL +SET
CH-A
IR
VOL - VOL +SET
CH-B
IR

2
1
4
3
1
2
3
4
3
3
4
2
2
3
5
2
CAUTION FOR SAFETY
FUNCTION AND NAME
CONNECTION
HOW TO SET
ANY TROUBLES ?
SPECIFICATIONS
BAL OUT B BAL OUT A
+ -
SENSITIVITY
B
SENSITIVITY
A
MIX OUT
ANT BANT A
DC IN
DC12V
1000mA
QR CODE
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
DO NOT EXPOSE THIS APPLIANCE TO
RAIN OR MOISTURE
WARNING
UHF WIRELESS MICROPHONE SYSTEM
SERIAL NO.
+ -
CONTENTS
This "Caution for safety" shows various kinds of pictures in order to be used safely and correctly and to prevent from damaging
other people, and their property. Please read with full understanding, and carefulness.
WARNING
This shows: Using this product with disregarding cautions might call for death or injury.
This shows: Using this product with disregarding cautions might call for people to be
harmed and goods to be damaged.
CAUTION
CAUTION FOR SAFETY
WARNING
● Making use of this product under the circumstances that a smoke, an abnormal smell, an irregular sound come out, it may cause
a fire and an electric shock. In this case, switch off the product, and take AC adapter plug out of the outlet right away. Take it to the
shop for repair.
● In case when water or foreign substances get into product, switch off right away, and take AC adapter plug out of outlet, and consult with the
repair shop, otherwise, it may cause a fire or an electric shock.
● Re-assembling this product is highly prohibited, otherwise, it may cause a fire or an electric shock.
● Do not take the cover out, otherwise, it may cause an electric shock. Inspection, repair should be done in the repair shop.
● This product can no way be used in the bathroom, otherwise, it may cause a fire, or an electric shock.
● Pay attention not for water to go into or get wet. Or it may cause a fire or an electric shock.
● AC adapters can be used only with AC100V-240V, otherwise it may cause fire or receive an electric shock.
● Be sure to make a use of adapters supplied, using other adapters may cause equipments out of use.
● This product is not designed for built-in installation : do not place the product in an enclosed place such as a bookcase or rack.
● Be careful for AC adapter plug, or outlet not to get dust or to get wet, or it may cause a fire.
● When this product is not used for a longer period, power supply plug should be taken out of outlet.
● In case the thunder is generated near-by, take power supply plug out of outlet right away, or it may cause a fire or an electric shock.
● If this product needs to be moved, switch off first, and then take power supply plug out, or it may damage cord, and may cause
a fire or an electric shock.
● Do not put this product near cooking counter or damp supply outlet, or it may cause a fire or an electric shock.
● Do not put this product on unstable desk, it may cause damage or injury when dropped.
● Do not leave this product for a longer period such as in the cars where all windows are shut, or place where direct sunshine hits,
or it may damage each part of this product, and may cause a fire.
CAUTION
FRONT PANEL
FUNCTION AND NAME
Infrared communication “IR”
Channel can be automatically set by communication
with microphones and Infrared.
Adjusting output sound volume
Channel setting button
Display
Power Switch
Terminal for DC12V power supply
Connected with supplied AC adapter plug.
Antenna teminal. (A CH, B CH)
Connected with antenna supplied.
MIX Output terminal. (A CH + B CH)
Balance Output terminal. (A CH, B CH)
Output sound adjusting volume
REAR PANEL
2
1532
45
5
Adjust input sensitivity. (A CH, B CH)
UHF Wireless Microphone System
VOL - VOL +SET
CH-A
IR
VOL - VOL +SET
CH-B
IR
4
※Setting details: Please see page 3.
1235
4
13 4

3
MICROPHONE
Channel indication
Battery level indication
BAL OUT B BAL OUT A
+ -
SENSITIVITY
B
SENSITIVITY
A
MIX OUT
ANT BANT A
DC IN
DC12V
1000mA
QR CODE
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
DO NOT EXPOSE THIS APPLIANCE TO
RAIN OR MOISTURE
WARNING
UHF WIRELESS MICROPHONE SYSTEM
SERIAL NO.
+ -
Frequency indication
Front
Rear
Battery(UM-3)X2
Display
1
2
3
4
5
6
7
Infrared communication “IR”
“HI”, “LO” Setting switch.
Adjustment of RF output power.
Grip
CONNECTION
Antenna
Preamplifier
Antenna
MIC
MIC-A MIC-B
2
3
6
5
1
7
1. Setting
Pushing power switch button for a few second (Minimum 5 Second).
It indicates " BY oN ” on the display. It was set.
2. Set release
Pushing power switch bottom for a few second (Minimum 5 Second).
It indicates " BY oF ” on the display. It was set release.
B
A
B
A
CH:038
64950 MHZ
C
C
Microphone head case
Switch
Battery case for UM-3 x 2
4
LO
HI
HOW TO SET
How to set microphone channel (Frequency)
LO HI
LO: Use to near distance.
HI: Use to far distance.
How to set microphone RF output power
1. Put a microphone to near the front panel of receiver.
2. Set a microphone switch on.
3. Select a channel with pushing“ ”or “ ” button
4. Pushing “SET” button of receiver.
5. A microphone channel is automatically set.
LO
HI
※Take out grip of microphone.
AC Adapter
Accessory wire (With Φ6.5 Jack )
How to set automatically muting
Power switch button
Display

● Batteries gone
Microphone can not switch in
4
Type
AF Frequency
Channel
Sensitivity
Sensitivity Control
Distortion (THD)
Audio Output
Balanced
A+B Output
Antenna Input
Power Requirements
Operating Temperature
Dimensions
Weight
AC Adapter
Power Voltage
DC output Voltage
AF Frequency
Wave Type
Channel
Channel interval
RF Output power
Frequency Stability
Modulation
Frequency Response
Dynamic Range
Microphone type
Dimensions
Weight
Accessories
Owner’s Manual
AC Adapter
Antenna
Connection Wire (With Φ6.5 Jack )
Double Superheterodyne
A: 640MHz - 664.75MHz (0-99 Ch)
B: 665MHz - 689.75MHz (100 - 199 Ch)
200 Ch (A: 0-99 Ch + B: 100-199 Ch)
12 dB uV (80 dB S/N)
12 dB uV - 32 dB uV
0.5 %(Max)
300 mV - 2.5 V
10 mV - 80 mV
BNC Type (50 Ω)
12V / 1000mA
5℃ - 40℃
430 (W) x 45.2 (H) x 183 (D) mm
1.85 Kg
100V - 240V AC 50/60Hz
DC12V / 1000mA
640MHz - 589.75MHz (0 -199 Ch)
F3
200 Ch (A: 0-99 Ch + B: 100-199 Ch)
300 kHz
10mW (Max) - 3mW (Min)
±0.005%(Max)
±45 KHz
80 Hz - 18 KHz
100 dB
Dinamic type
Φ52 X 250 (H) mm
350g ( Include two batteries ）
1
1
(1/4λ) 2
1
RECEIVER MICROPHONE
Any troubles? please check the followings. Your careless mistakes seem to be troubles.
Consult with your dealers in case any troubles can not be solved after checking the followings.
ANY TROUBLES ?
Trouble Cause Remedy
● AC adapter is not pluged in an outlet.
● AC adapter plug (DC 12V) is not connected to
Receiver.
● Plug in an outlet.
● Connect AC adapter plug(DC12V) to Receiver.
● Receiver is correctly connected to other equipments?
● Receiver volume is set “ Minimum ” position?
● Volume ofother equipments connected is set at
“ Minimum ” position?
●
Setting receiver channel is same with that ofmicrophone ?
● Checkconnection again.
● Turn up Receiver volume.
● Turn up other equipments volume.
● Re-set channels.
SPECIFICATIONS
● Design and specifications subject to change without notice.
430
183
45.2
( mm )
Out of power supply
No sound creation
Sound distortion
Noise out of microphone
● Receiver volume is set too much?
● Turn down Receiver volume, and turn up other
equipments volume.
● Obstacle wave is disturbing?
● Microphone wave power is set too week?
● Set another channel to leave away from obstacle
wave creation.
● Re-set microphone wave power.
● Change batteries.
52
UHF Wireless Microphone System
VOL - VOL +SET
CH-A
IR
VOL - VOL +SET
CH-B
IR
250

● 在使用时 、 如果有冒烟、异味、异音等异常现象发生 、 为避免发生火灾 、 触 电现象等 、 请立即切断本机电源 、 然后拔下AC电源插头。
确认没有再冒烟后 、 到贩卖店进行修理。
● 在使用时如有水或异物等混入机体内 、 首先切断机体电源 、 然后拔下AC电源插头。请尽快与 经销商 联系 、 进行修理。
● 在未进行维修的状态下使用 、 会引起火灾 、 触 电现象等问题。
● 请勿分解、改装本机器、会引起火灾、 触 电、故障等现象。绝对不可以打开本机器的外壳、会引起 触 电 事故 。内部的检查、
修理等请委托
经销商 。
● 请勿在浴室内使用 、 会引起火灾、 触 电等现象。
● 请防止机器进水或使机器 受潮 、 会引起火灾、 触 电等现象。
● AC电源插头不要插入电压（AC100V - AC240V）以外的电源上。有造成火灾、触电的危险。
● 一定要 使用 本机附属品AC插头。使用其他电源插头会有造成机器故障的可能。
● 请不要用带有灰尘 、 或带有湿气的插头和插座 、 会引起火灾等现象。
5
注意
1
2
3
1
2
3
4
6
6
7
5
5
6
45
● 旅行等长时间不使用时 、 为了安全请务必拔下 插头 。
● 如近距离内有雷电现象时 、 请拔下电源插头，由于雷电原因，会引起火灾、 触 电、故障等现象。
● 移动时首先 关闭电源开关 、 然后务必拔下电源插头。
● 请勿放置在灶台、加湿器及有油烟、雾气的地方。会引起火灾、 触 电等现象。
● 请勿放置在不安稳的桌上、或倾斜的地方。会容易掉落、翻倒而造成损坏、损伤等现象。
● 请勿放置在紧闭车窗的汽车内、或阳光直射及高温的地方。以免造成零部件的损坏、而引起火灾。
各部分的功能及名称
前面板
红外线对频“IR”
与麦克风的红外线窗口相对，将会自动设定频道。
5
设定方法
故障分析处理
产品规格
安全注意事项
安全注意事项是为了安全正确使用本商品 、 防止给 自己 及他人带来财产损害。
以下用图标的形式加以注明。 请仔细阅读本文。
安全注意事项
各部分的功能及名称
连接方法
目录
警告
无视或误用会有造成人身事故的可能性。
注意 注意
无视或误用会有造成人身伤残
、 或对财产损坏的可能性。
警告
警告
显示屏
输出音量调节按钮
频道设定按钮
※ 设定
方法 请见 第 6页。
电源开关
后背板
连接DC12V电源插口
天线连接插口
输入灵敏度
MIC A,MIC B音频混合输出
MIC A,MIC B音频输出插口（XLR型插座）
UHF Wireless Microphone System
VOL - VOL +SET
CH-A
IR
VOL - VOL +SET
CH-B
IR
1235
4
13 4
BAL OUT B BAL OUT A
+ -
SENSITIVITY
B
SENSITIVITY
A
MIX OUT
ANT BANT A
DC IN
DC12V
1000mA
QR CODE
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
DO NOT EXPOSE THIS APPLIANCE TO
RAIN OR MOISTURE
WARNING
UHF WIRELESS MICROPHONE SYSTEM
SERIAL NO.
+ -
2
1532
45
4

6
前面
后背
电池 (UM-3)X2
1
2
3
4
5
6
7
B
A
表示频道
表示频率
B
A
CH:038
64950 MHZ
C
C
表示电池电量
麦克风
网头及音头模组
麦克风下管体
电池窗
2节 (UM-3)电池
红外线对频窗口“IR”
显示屏
电源开关
连接方法
附属
天线
效果处理器
附属AC电源插头
附属Φ6.5麦克风连接线
附属
天线
设定方法
“HI ”、“LO” 开关
调整电波的强度。
BAL OUT B BAL OUT A
+ -
SENSITIVITY
B
SENSITIVITY
A
MIX OUT
ANT BANT A
DC IN
DC12V
1000mA
QR CODE
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
DO NOT EXPOSE THIS APPLIANCE TO
RAIN OR MOISTURE
WARNING
UHF WIRELESS MICROPHONE SYSTEM
SERIAL NO.
+ -
MIC
MIC-A MIC-B
2
3
6
5
1
74
LO
HI
LO HI
LO
HI
麦克风的频道（频率）设定方法
1. 将麦克风放在接收器的前面板附近
2. 0将麦克风开关打开
3. 通过 “ ▲ ”或 “ ▼ ” 按键选择频道
4. 按下接收机面板上的SET按键
5. 麦克风频道会自动设定
电波强度的调整方法
※ 取下手持麦克风的下管体
LO: 用于近距离使用
HI: 用于远距离使用
显示屏
电源开关
麦克风静音功能设定方法
1. 设定开启模式
在开机状态下长按电源键（5秒以上），直至麦克风自动开机，显示”BY oN ”，即表示自动静音功能已开启。
2. 设定关闭模式
长按电源键（5秒以上），直至麦克风自动开机，显示”BY oF “，即表示自动静音功能已关闭。

接收类型
接收频率范围
频道数
灵敏度
灵敏度调节范围
失真度 (THD)
音频输出
平衡输出
混合输出
天线接口
电源需求
工作温度
规格尺寸
重量
电源适配器
输入电压
输出电压
发射频率
波型
频道数
频道间隔
发射功率
频率稳定度
最大频偏
频率响应
动态范围
麦克风类型
尺寸
重量
附属品
使用说明书
电源适配器
天线
连接线
(Φ6.5 接头 )
二次变频超外差
A: 640MHz - 664.75MHz (0-99 Ch)
B: 665MHz - 689.75MHz (100 - 199 Ch)
200 Ch (A: 0-99 Ch + B: 100-199 Ch)
12 dB uV (80 dB S/N)
12 dB uV - 32 dB uV
≦0.5 %
300 mV - 2.5 V
10 mV - 80 mV
BNC (50 Ω)
12V / 1000mA
-10℃ - +40℃
430(
长 ) x 45.2 ( 高 ) x 183 ( 宽 ) mm
1.85 Kg
100V - 240V AC 50/60Hz
DC12V 1000mA
740MHz - 789.75MHz (0 -199 Ch)
F3
200 Ch (A: 0-99 Ch + B: 100-199 Ch)
300 kHz
10mW (
高功率 ) - 3mW ( 低功率 )
±0.005%
以内
±45 KHz
80 Hz - 18 KHz
100 dB
动圈式
Φ52 X 250 (H) mm
350 g (
包含两节电池 ）
1
1
(1/4λ) 2
1
故障分析处理
如感觉有故障请根据以下方法检查。偶尔会有因为操作错误而误认为是故障的现象。
根据以下方法检查也不能解决的情况下，请直接联系代理经销商
故障症状 原因 解决方法
7
麦克风
● 设计和规格如有变更，恕不另行通知 。
430
183
45.2
UHF Wireless Microphone System
VOL - VOL +SET
CH-A
IR
VOL - VOL +SET
CH-B
IR
52
250
( mm )
没有电源输入
麦克风开关没有反应
有电源输入但是没有声音
破音
麦克风有杂音
● AC电源插头没有完全插入插座
● AC电源插头与接收器没有完全连接好。
● 电池没有电
● 接收器与其他周边设备的连接方法不正确。
● 接收器的音量旋钮是最小状态。
● 周边设备的音量旋钮是最小状态。
● 接收器和麦克风的频道不同。
● 可能受干扰信号的影响。
● 可能是麦克风的信号强度设定过小。
● 接收器的音量旋钮打的过大。
● 将AC电源插头完全插入插座。
● 修正AC电源插头与接收器之间的连接。
● 更换电池
● 确认连接部分
● 打开接收器的旋钮
● 打开周边设备的旋钮
● 设定频道。
● 接收器的旋钮减小，连接的周边设备旋钮打大。
● 变更为没有干扰信号的频道
● 重新设定麦克风的信号强度。
产品规格
接收器

〒343-0856 埼玉県越谷市谷中町３丁目17-1
2. 2021 BIM0210A-00
bik-audio.com
3-17-1 YANAKA-CHO. KOSHIGAYA-SHI. SAITAMA-KEN. 343-0856 JAPAN