BIK BJ-U100 User manual

使用说明书
OWNER'S MANUAL
Thank you for purchasing our UHF WIRELESS MICROPHONE SYSTEM.
Please read the owner's manual thoroughly prior to use.
Please keep the manual for future reference.
UHF WIRELESS MICROPHONE SYSTEM
UHF无线麦克风系统
感谢您购买本公司的 UHF无线麦克风系统 。
为了尽快的熟悉掌握本产品的各项功能，使用前请仔细阅读本说明书。
阅读后，请注意妥善保管。
UHF Wireless Receiver CH-A
VOL MENU ACT
CH-B
VOL MENU ACT
CH-B
IR
CH-A
M
Hz
RF AF
M
Hz
RF AF

2
4
1
3
5
1
2
3
4
3
3
4
2
2
3
4
2
CAUTION FOR SAFETY
FUNCTION AND NAME
CONNECTION
BASIC OPERATION
HOW TO SET
ANY TROUBLES ?
SPECIFICATIONS
UHF Wireless Receiver CH-A
VOL MENU ACT
CH-B
VOL MENU ACT
CH-B
IR
CH-A
M
Hz
RF AF
M
Hz
RF AF
ANT A
DC IN
MIX OUT
BAL OUT B
ANT BBAL OUT A
DC12V
0.6A
MODEL
WIRELESS RECEIVER
SERIAL NO.
CONTENTS
This "Caution for safety" shows various kinds of pictures in order to be used safely and correctly and to prevent from damaging
other people, and their property. Please read with full understanding, and carefulness.
WARNING
This shows: Using this product with disregarding cautions might call for death or injury.
This shows: Using this product with disregarding cautions might call for people to be
harmed and goods to be damaged.
CAUTION
CAUTION FOR SAFETY
WARNING
● Making use of this product under the circumstances that a smoke, an abnormal smell, an irregular sound come out, it may cause
a fire and an electric shock. In this case, switch off the product, and take AC adapter plug out of the outlet right away. Bring it to the
shop for repair.
● In case when water or foreign substances get into product, switch off right away, and take AC adapter plug out of outlet, and consult with the
repair shop, otherwise, it may cause a fire or an electric shock.
● Re-assembling this product is highly prohibited, otherwise, it may cause a fire or an electric shock.
● Do not take the cover out, otherwise, it may cause an electric shock. Inspection, repair should be done in the repair shop.
● This product can no way be used in the bathroom, otherwise, it may cause a fire, or an electric shock.
● Pay attention not for water to go into or get wet. Or it may cause a fire or an electric shock.
● AC adapters can be used only with AC100V-240V, otherwise it may cause fire or receive an electric shock.
● Be sure to make a use of adapters supplied, using other adapters may cause equipments out of use.
● This product is not designed for built-in installation : do not place the product in an enclosed place such as a bookcase or rack.
● Be careful for AC adapter plug, or outlet not to get dust or to get wet, or it may cause a fire.
● When this product is not used for a longer period, power supply plug should be taken out of outlet.
● In case the thunder is generated near-by, take power supply plug out of outlet right away, or it may cause a fire or an electric shock.
● If this product needs to be moved, switch off first, and then take power supply plug out, or it may damage cord, and may cause
a fire or an electric shock.
● Do not put this product near cooking counter or damp supply outlet, or it may cause a fire or an electric shock.
● Do not put this product on unstable desk, it may cause damage or injury when dropped.
● Do not leave this product for a longer period such as in the cars where all windows are shut, or place where direct sunshine hits,
or it may damage each part of this product, and may cause a fire.
CAUTION
FRONT PANEL
FUNCTION AND NAME
Infrared communication “IR”
Channel can be automatically set by communication
with microphones and receiver.
Adjusting volume, adjusting channel.
Menu button
Pushing “MENU” button for a 3 seconds.
Set a channel with pushing “ ” or “ ” VOL button.
Pushing “MENU” button for a 3 seconds, It is locked.
Screen indication
Power Switch
Terminal for DC12V power supply
Connected with supplied AC adapter plug.
Antenna terminal
Connected with antenna supplied.
MIX output terminal.
Output terminal for mixing MIC A with MIC B.
VOL button
REAR PANEL
3
24 4 1 2
1
235
2 6 4
Pushing ACT button, it is connected with microphone
automatically.
6
ACT button
Output terminal (Balance output).

3
MICROPHONE
BJ-U100
MIC
MIC-A MIC-B
UHF Wireless Receiver CH-A
VOL MENU ACT
CH-B
VOL MENU ACT
CH-B
IR
CH-A
M
Hz
RF AF
M
Hz
RF AF
2 1
Battery(UM-3) X2
Indication screen
1
2
3
4
6
5
Infrared communication “IR”
※Caution
3
Grip
CONNECTION
BASIC OPERATION
A channel of a receiver and a microphone are set at the factory,
When a RF signal showed to a screen at the power switch ON
of receiver, there is interfering signal in the neighborhood.
Please change the channel to other channels. (Please refer to ”How to set the channel” )
Antenna
Preamplifier
Wireless receiver
AC adapter
4
Microphone head case
Switch
Battery case for UM-3 x 2
1. Set “off “ position of microphone switch ③and ④.
2. To set “On”, push receiver power switch ①.
3. To set microphone switch “On”.
4. To adjust volume ②.
Antenna
123
5
4
6
How to set the channel (Frequency)
Set microphone switch “On”, then direct “IR” in infrared window
“IR” infrared window of receiver.
Push “ACT” button.
A microphone channel (frequency) is automatically set.
HOW TO SET
ANT A
DC IN
MIX OUT
BAL OUT B
ANT BBAL OUT A
DC12V
0.6A
MODEL
WIRELESS RECEIVER
SERIAL NO.
Pushing “MENU” button for a 3 seconds.
Set a channel with pushing “ ” or “ ” VOL button.
Pushing “MENU” button for a 3 seconds, It is locked.
How to set microphone.
UHF Wireless Receiver CH-A
VOL MENU ACT
CH-B
VOL MENU ACT
CH-B
IR
CH-A
M
Hz
RF AF
M
Hz
RF AF
act

● Batteries gone
Microphone can not switch on
4
Type
AF Frequency
Channel
Sensitivity
Distortion
Audio Output
Balanced
A+B Output
Antenna Input
Power Requirements
Operating Temperature
Dimensions
Weight
AC Adapter
Power Voltage
DC output Voltage
AF Frequency
Wave Type
Radiated Output
Frequency Stability
Modulation
Frequency Response
Dinamic Range
Microphone type
Dimensions
Weight
610MHz - 669.7MHz
F3
10mW
±0.005%(Max)
±45 KHz
40 Hz - 18 KHz
100 dB
Dinamic type
Φ51 X 247 (H) mm
350g ( Include two batteries ）
Accessories
Owner’s Manual
AC Adapter
Antenna
Connection Wire (With Φ6.5 Jack )
1
1
(1/2λ) 2
1
RECEIVER MICROPHONE
Any troubles? please check the followings. Your careless mistakes seem to be troubles.
Consult with your dealers in case any troubles can not be solved after checking the followings.
ANY TROUBLES ?
Trouble Cause Remedy
● AC adapter is not pluged in an outlet.
● AC adapter plug (DC 12V) is not connected to
Receiver.
● Plug in an outlet.
● Connect AC adapter plug(DC12V) to Receiver.
● Receiver is correctly connected to other equipments?
● Receiver volume is set “ Minimum ” position?
● Volume ofother equipments connected is set at
“ Minimum ” position?
●
Setting receiver channel is same with that ofmicrophone ?
● Checkconnection again.
● Turn up Receiver volume.
● Turn up other equipments volume.
● Re-set channels.
SPECIFICATIONS
● Design and specifications subject to change without notice.
Φ51
247
(mm)
UHF Wireless Receiver CH-A
VOL MENU ACT
CH-B
VOL MENU ACT
CH-B
IR
CH-A
M
Hz
RF AF
M
Hz
RF AF
211
160
51
45
Can not power switch on
No sound
Sound distortion
Noise out of microphone
● Receiver volume is set too much?
● Turn down Receiver volume, and turn up other
equipment volume.
● Obstacle wave is disturbing?
● Microphone wave power is set too week?
● Set another channel to leave away from obstacle
wave creation.
● Re-set microphone wave power.
● Change batteris.
Double Superheterodyne
A: 610MHz - 639.7MHz (0-99 Ch)
B: 640MHz - 669.7MHz (0 - 99 Ch)
200 Ch (0-99 Ch + 0-99 Ch)
12 dB uV (80 dB S/N)
0.5 %(Max)
300 mV - 2 V
10 mV - 2 V
BNC Type (50 Ω)
12V / 600mA
5℃- 40℃
211 (W) x 45 (H) x 160 (D) mm
0.8 Kg
100V - 240V AC 50/60Hz
DC12V 1000mA

● 在使用时 、 如果有冒烟、异味、异音等异常现象发生 、 为避免发生火灾 、 触 电现象等 、 请立即切断本机电源 、 然后拔下AC电源插头。
确认没有再冒烟后 、 到贩卖店进行修理。
● 在使用时如有水或异物等混入机体内 、 首先切断机体电源 、 然后拔下AC电源插头。请尽快与 经销商 联系 、 进行修理。
● 在未进行维修的状态下使用 、 会引起火灾 、 触 电现象等问题。
● 请勿分解、改装本机器、会引起火灾、 触 电、故障等现象。绝对不可以打开本机器的外壳、会引起 触 电 事故 。内部的检查、
修理等请委托
经销商 。
● 请勿在浴室内使用 、 会引起火灾、 触 电等现象。
● 请防止机器进水或使机器 受潮 、 会引起火灾、 触 电等现象。
● AC电源插头不要插入电压（AC100V - AC240V）以外的电源上。有造成火灾、触电的危险。
● 一定要 使用 本机附属品AC插头。使用其他电源插头会有造成机器故障的可能。
● 请不要用带有灰尘 、 或带有湿气的插头和插座 、 会引起火灾等现象。
5
7
注意
6
6
7
5
5
6
● 旅行等长时间不使用时 、 为了安全请务必拔下 插头 。
● 如近距离内有雷电现象时 、 请拔下电源插头，由于雷电原因，会引起火灾、 触 电、故障等现象。
● 移动时首先 关闭电源开关 、 然后务必拔下电源插头。
● 请勿放置在灶台、加湿器及有油烟、雾气的地方。会引起火灾、 触 电等现象。
● 请勿放置在不安稳的桌上、或倾斜的地方。会容易掉落、翻倒而造成损坏、损伤等现象。
● 请勿放置在紧闭车窗的汽车内、或阳光直射及高温的地方。以免造成零部件的损坏、而引起火灾。
各部分的功能及名称
前面板
红外线对频“IR”
与麦克风的红外线窗口相对，将会自动设定频道。
UHF Wireless Receiver CH-A
VOL MENU ACT
CH-B
VOL MENU ACT
CH-B
IR
CH-A
M
Hz
RF AF
M
Hz
RF AF
1
235
2 6 4
音量调节按钮、频率调节按钮
操作方法
设定方法
故障分析处理
安全注意事项
安全注意事项是为了安全正确使用本商品 、 防止给 自己 及他人带来财产损害。
以下用图标的形式加以注明。 请仔细阅读本文。
安全注意事项
各部分的功能及名称
连接方法
目录
产品规格
警告
无视或误用会有造成人身事故的可能性。
注意 注意
无视或误用会有造成人身伤残
、 或对财产损坏的可能性。
警告
警告
电源开关
后背板
连接DC12V电源插口
天线连接插口 MIC A,MIC B音频输出插口（XLR型插座）
1
3
5
4
2
MENU 按钮
6
ACT 按钮
显示屏
1
2
3
4
ANT A
DC IN
MIX OUT
BAL OUT B
ANT BBAL OUT A
DC12V
0.6A
MODEL
WIRELESS RECEIVER
SERIAL NO.
3
24 4 1 2
MIC A,MIC B音频混合输出
MENU按键长按３秒（解锁）
按VOL按键 ” 、 ” 设定频道
MENU按键长按３秒（锁定）
麦克风自动连接

6
1
2
3
4
6
5
123
5
4
6
UHF Wireless Receiver CH-A
VOL MENU ACT
CH-B
VOL MENU ACT
CH-B
IR
CH-A
M
Hz
RF AF
M
Hz
RF AF
电池 (UM-3)X2
操作方法
麦克风
网头及音头模组
麦克风管体
电池窗 2节 (UM-3)电池
红外线对频窗口“IR”
显示屏
连接方法
无线信号接收器
附属
天线
效果处理器
附属AC电源插头
附属Φ6.5麦克风连接线
1.将麦克风开关
③,④, ”OFF”
2.接收器的电源开关”ON”
3.麦克风开关”ON”
4.转动旋钮
②, 调节音量
※ 注意
出厂时完成接收器与麦克风的频道设定。
接收器电源开关ON的时候，如果显示屏左右有
RF信号显示的现象，说明周围有干扰信号。
这种情况下请变更频道。*请参照设定方法。
设定方法
电源开关
BJ-U100
MIC
MIC-A MIC-B
ANT A
DC IN
MIX OUT
BAL OUT B
ANT BBAL OUT A
DC12V
0.6A
MODEL
WIRELESS RECEIVER
SERIAL NO.
附属
天线
UHF Wireless Receiver CH-A
VOL MENU ACT
CH-B
VOL MENU ACT
CH-B
IR
CH-A
M
Hz
RF AF
M
Hz
RF AF
2 1
MENU按键长按３秒（解锁）
按VOL按键 ” 、 ” 设定频道
MENU按键长按３秒（锁定）
act
1.频道设定方法 ２.麦克风设定方法
34
１. 打开发射机电池盖，露出红外（IR）端口。
２.
将红外端口朝向接收机，然后从接收机液晶屏界面选择Sync（同步）>Sync（发送）。
接收机上的显示屏将显示是否同步成功。如果同步失败，请再次尝试操作，
并确保已将发射机上的红外端口暴露在外，并直接对准接收机的红外端口。
注释：在另一台接收机上执行同步之前，应关闭电池仓门。

接收类型
接收频率范围
频道数
灵敏度
失真度
音频输出
平衡输出
混合输出
天线接口
电源需求
工作温度
规格尺寸
重量
电源适配器
输入电压
输出电压
发射频率
波型
发射功率
频率稳定度
最大频偏
频率响应
动态范围
麦克风类型
尺寸
重量
A: 610MHz - 639.7MHz (0-99 Ch)
B: 640MHz - 669.7MHz (0 - 99 Ch)
200 Ch (0-99 Ch + 0-99 Ch)
12 dB uV (80 dB S/N)
0.5 % (Max)
300 mV - 2 V
10 mV - 2 V
BNC (50 Ω)
12V / 600mA
5℃- 40℃
211(
长 )x45( 高 )x160( 宽 )mm
0.8Kg
100V-240VAC50/60Hz
DC12V1000mA
610MHz - 669.7MHz
F3
10mW
±0.005%
以内
±45 KHz
40 Hz - 18 KHz
100 dB
动圈式
Φ51 X 247 (H) mm
350 g (
包含两节电池 ）
使用手册
电源适配器
天线
连接线
(Φ6.5 接头 )
1
1
(1/2λ) 2
1
故障分析处理
如感觉有故障请根据以下方法检查。偶尔会有因为操作错误而误认为是故障的现象。
根据以下方法检查也不能解决的情况下，请直接联系代理经销商
故障症状 原因 解决方法
7
麦克风
● 设计和规格如有变更，恕不另行通知 。
二次变频超外差
附件
没有电源输入
麦克风开关没有反应
有电源输入但是没有声音
破音
麦克风有杂音
● AC电源插头没有完全插入插座
● AC电源插头与接收器没有完全连接好。
● 电池没有电
● 接收器与其他周边设备的连接方法不正确。
● 接收器的音量旋钮是最小状态。
● 周边设备的音量旋钮是最小状态。
● 接收器和麦克风的频道不同。
● 可能受干扰信号的影响。
● 可能是麦克风的信号强度设定过小。
● 接收器的音量旋钮打的过大。
● 将AC电源插头完全插入插座。
● 修正AC电源插头与接收器之间的连接。
● 更换电池
● 确认连接部分
● 打开接收器的旋钮
● 打开周边设备的旋钮
● 设定频道。
● 接收器的旋钮减小，连接的周边设备旋钮打大。
● 变更为没有干扰信号的频道
● 重新设定麦克风的信号强度。
产品规格
接收器
Φ51
247
(mm)
UHF Wireless Receiver CH-A
VOL MENU ACT
CH-B
VOL MENU ACT
CH-B
IR
CH-A
M
Hz
RF AF
M
Hz
RF AF
211
160
51
45

〒343-0856 埼玉県越谷市谷中町３丁目17-1
5. 2020 BIM0192A-00
bik-audio.com
3-17-1 YANAKA-CHO. KOSHIGAYA-SHI. SAITAMA-KEN. 343-0856 JAPAN