BioQuip 1406 User manual

BioQuip Products, Inc. 2321 Gladwick St., Rancho Dominguez, CA 90220 USA
Phone: [phone] • www.bioquip.com • fax: [phone]
1
Outdoor Cage Mesh Enclosures #1406 and #1412 Assembly Instructions
____________________________________________________________
6 x 6 x 6
#1406S
6 x 12 x 6
#1412S
-
To begin, ensure your eyelet
bolts are fully unscrewed.
Once the eyelet bolts have been
unscrewed the connections are
open and you are ready to begin
assembly.
To assemble your cage, simply
insert the pipes into the 3-way or
4-way connectors, then tighten
down the eyelet bolts to hold the
pipes in place.
X4 pieces
X2 piece
X13 tube
segments
X4 pieces
X8 tube segments

BioQuip Products, Inc. 2321 Gladwick St., Rancho Dominguez, CA 90220 USA
Phone: [phone] • www.bioquip.com • fax: [phone]
2
*Please note, that the below assembly photos are for the 6 x 6 x 6 (#1406S) model. To assemble
a 6 x 12 x 6 (#1412S) use the 4-way connectors in place of two 3-way connectors and double
your length with the remaining pieces.
Here is what a completed frame would look like. To finish, your frame can be covered with an outdoor
cage (1406A, B or C) which can be rolled onto the
frame.
Have any questions or suggestions? Please email us: [e-mail]