BJ Live BJ-EE Series User manual

c.Mare de Déu del Coll, 70,Local|08023|Barcelona|Spain|t.+34 93 285 04 37|fax + 34 93 553 56 34| [e-mail] | www.bjliveat.com
BJ-EEXX Acrylic Mirrors
Instructions manual

BJ-EEXX Acrylic mirrors
Page 2
Instructions manual
BJ-EEXX Acrylic mirrors
1_Description
Acrylic mirrors are special plastic mirrors used for reflecting bubble tubes and other
elements in a multisensory room.
They are specially designed to be safe and durable under demanding environments.
The plastic material helps preventing breakage and accidents.
They are reinforced with a wooden panel to prevent warping and to ensure durability.
The edges are coated with a plastic material to avoid cuts and improve aesthetics.
They are easy to install without protruding from the wall.
Available in different sizes and shapes.
2_ Installation
Tools:
oDrill and 6 mm bit
o2 anchors (number 6)
o2 Screws
oPencil
oTape measure
oLevel
Installation:
1. Locate the mirror and level up.
2. Mark the holes.
3. Drilling, introduce the anchor and tighten the screws.
4. Hang the mirror as shown in picture below

BJ-EEXX Acrylic mirrors
Page 3
Instructions manual
BJ-EEXX Acrylic mirrors
3_Cleaning
1. Use a soft clean cotton or wool cloth to remove solid debris attached to the mirror
before cleaning the mirror.
2. Use a very soft clean cloth slightly moistened in mild soap. Repeatedly rinse the
cloth to remove any dust that may be on the cloth.
3. Dry with a soft dry cloth. Avoid rubbing vigorously because it may scratch the mirror.
IMPORTANT:
oDo not use abrasive products or products for cleaning windows or kitchen.
oDo not use cloths or anything that may scratch the mirror surface.