BJ Live BJ-EEGC User manual

Manual de uso
Nombre del producto
Version
February 2017
Refereces included
BJ-EEGC
BJ-EEGR
BJ-EEPC
BJ-EEPR
BJ-EEM
Mirrors
Installation Guide

Installation Guide
Mirrors
Please read the whole manual before you
start.
Do not use abrasive products or products
for cleaning windows or kitchen.
Do not use cloths or anything that may
scratch the mirror surface.
Safety precautions
Introduction to the product
-Acrylic mirrors are special plastic mirrors used for reflecting bubble
tubes and other elements in a multisensory room.
-They are specially designed to be safe and durable under demanding
environments.
-The plastic material helps preventing breakage and accidents.
-They are reinforced with a wooden panel to prevent warping and to
ensure durability.
-The edges are coated with a plastic material to avoid cuts and improve
aesthetics.
-They are easy to install without protruding from the wall.
1. Components
-Metracrylate mirror with wooden back pannel, and fixing holes
2. Pre-installation requirements
-Asegurarse que la pared donde se instalará el espejo es suficientemente
resistente a peso.
2.1 Needed tools
-Drill and 6 mm bit
-2 anchors (number 6)
-2 Screws
-Pencil
-Tape measure
-Level

Espejos
Página 3
3. Installation
-Locate the mirror according to the mounting position to check position.
-Mark on the wall the place to drill, accordingly with the position of the
holes in the mirror that will accommodate the anchors. Make sure that
the marks are level
-Drill the wholes, introduce the anchor and tighten the screws.
When the mirror is set up in a room along with BJLive’s modular
furniture :
-The máximum height of the mirror in the wall must be 150cm
-The lowest 5cm of the mirror must hide behind the modular
furniture

Installation Guide
Mirrors
-Hang the mirror as shown in picture
below
-Remove the protective film
-Set the modular furniture, pressing
against the mirror
4. Cleaning and mantinance
-Use a soft clean cotton or wool cloth to remove solid debris attached to
the mirror before cleaning the mirror.
-Use a very soft clean cloth slightly moistened in mild soap. Repeatedly
rinse the cloth to remove any dust that may be on the cloth.
-Dry with a soft dry cloth. Avoid rubbing vigorously because it may
scratch the mirror.
5. Warranty
Within the statutory warranty period we undertake to rectify free of charge
by repair or replacement any product defects arising from material or
production faults.
Any unauthorized tampering with, or modifications to the product will annul
this warranty.
6. Customer Service contact
If, despite of correct handling, faults or malfunctions occur or if the product
was damaged, please contact us at the address below:
Any damage caused while shipping should be notified inmediatelly.
Calle Mare de Déu del Coll, 70,Local
08023 Barcelona
Spain
t.+34 93 285 04 37
fax + 34 93 553 56 34|
[email protected]