Black Hawk Automotive BH8030 Instructions for use

This is the safety alert symbol. It is used to alert you to potential personal injury hazards.
Obey all safety messages that follow this symbol to avoid possible injury or death.
!
!ADVERTENCIA
• Leer, comprender, y seguir las instrucciónes antes de utilizar el aparato.
• El manual de instrucciónes y la información de seguridad deben estar comunicado en lengua del operador
antes del uso.
• No seguir estas indicaciónes puede causar daños personales o materiales.
Model Capacity
BH8030 300 lbs.
Tire Cart
Operating Instructions & Parts Manual
Blackhawk Automotive is a Licensed Trade Mark Made by SFA Companies, Kansas City, MO
SFA Companies
10939 N. Pomona Ave. Kansas City, MO 64153
[email protected]
Made in PRC
BH8030-M0 03/11
Read this manual and follow all the Safety Rules and Operating Instructions before using this product.

2
Model Capacity Roller Spread Overall Size (L x W x H)
BH8030 300 lbs. 19-1/2" 50" x 27-1/2" x 20"
SPECIFICATIONS
SAFETY AND GENERAL INFORMATION
Save these instructions. For your safety, read, understand, and follow the information provided with and on this
product before using. The owner and/or operator of this equipment shall have an understanding of this equipment and
safe operating procedures before attempting to use. The owner and/or operator shall be aware that use and repair
of this product may require special skills and knowledge. Instructions and safety information shall be conveyed in
the operator's native language before use of this product is authorized. If any doubt exists as to the safe and proper
use of this wheel dolly, remove from service immediately.
Inspect before each use. Do not use if broken, bent, cracked, or damaged parts (including labels) are noted.
Any tire cart that appears damaged in any way, operates abnormally or is missing parts, shall be removed from
service immediately and the manufacturer notied. If you suspect that the product was subjected to a shock load (a
load dropped suddenly, unexpectedly upon it), immediately discontinue use until it has been checked by a factory
authorized service center (contact distributor or manufacturer for list of Authorized Service Centers). Replace worn
or damaged parts with Factory Authorized Replacement Parts only. Labels and owner’s manuals are available from
manufacturer.
PRODUCT DESCRIPTION
The Blackhawk Tire Cart is designed to facilitate the removal, transportation and installation of a single pneumatic
tire/wheel assembly as found on many trucks, buses and trailers. This is NOT suitable for use as a wheel and tire
puller. It is designed ONLY for use in removing up to rated capacity tire and wheel assemblies which are not bound
and/or seized up at the brake drum or hub assemblies.
NEVER load this device with more than the weight of the tire to be moved!
BEFORE USE
1. Verify that the product and the application are compatible, if in doubt call Blackhawk Automotive Tech. Service
[phone]. Read the owner's manual completely and familiarize yourself thoroughly with this product, its
components, and recognize the hazards associated with its use.
2. Assemble the Tire Cart as shown in Figure 2.
3. Check to ensure the Tire Cart wheels roll freely and smoothly before putting into service. Replace worn or damaged
parts with Factory Authorized Replacement Parts only. Contact the manufacturer or distributor of this product for
a list of factory authorized service centers.
To avoid crushing and related injuries and or property damage:
•Read, understand and follow all printed materials provided with and on this product.
• Do not exceed rated capacity.
• Use only on hard, level surfaces capable of sustaining the load.
• Always use both hands to control tire and Tire Cart.
• Move slowly and maintain tire in as close to vertical position as possible.
• No alterations shall be made to this product.
• Failure to heed these markings may result in personal injury and/or property damage.
WARNING
!
!

OPERATION
Follow the vehicle manufacturers recommended removal and installation procedures for tire, wheel or hub.
After the tire/wheel assembly has been loosened from the hub or axle and is ready to be removed, position the tire
cart under the tire to be removed. Adjust cart position such that the tire/wheel assembly will balance between roll-
ers without falling.
Loading the Tire Cart
NEVER load this device beyond rated capacity!
NEVER use the Tire Cart as a wheel pulling device. Before
transporting wheel assembly, ensure that it is free from the
hub or drum assembly and balanced between the rollers.
When the weight of the loosened tire and wheel assembly is supported
by the Tire Cart, carefully roll the cart away from the drum or axle.
Always use both hands to control tire and Tire Cart!
Transporting the Loaded Tire Cart
1. Ensure that tire is properly placed on the rollers.
2. When wheel assembly has cleared the hub or the axle, push or
pull to desired location. Walk slowly, exercize caution and look
ahead to avoid obstacles while using both hands to control the tire
and the tire cart.
3
REPLACEMENT PARTS
Not all components of the Blackhawk Tire Cart are replacement items, but are illustrated as a convenient reference
of location and position in the assembly sequence. When ordering parts, give model number, parts number and parts
description. Call or write for current pricing: SFA Companies, Inc. 10939 N. Pomona Ave. Kansas City, MO 64153
E-Mail: [email protected] Phone: [phone] Fax: [phone]
1
6
6
4
3
2
5
Figure 2 - Parts Illustration for Tire Cart
Figure 1 - Always use both hands
Item Part No. Description Qty
192030-1 Handle Assembly 1
292030-2 Roller Assembly 2
392030-3 L Roller Frame 1
4 92030-4 R Roller Frame 1
5 92030-5 Wheel Assembly 2
6 92030-6 Frame Hardware Kit 1
!
!
!
!

4
ONE YEAR LIMITED WARRANTY
For a period of one (1) year from date of purchase, SFA Companies will repair or replace, at its option, without charge,
any of its products which fails due to a defect in material or workmanship under normal usage. This limited warranty
is a consumer’s exclusive remedy.
Performance of any obligation under this warranty may be obtained by returning the warranted product, freight
prepaid, to SFA Companies Warranty Service Department, 10939 N. Pomona Ave., Kansas city, MO 64153.
Except where such limitations and exclusions are specically prohibited by applicable law.
(1) THE CONSUMER’S SOLE AND EXCLUSIVE REMEDY SHALL BE THE REPAIR OR REPLACEMENT OF
DEFECTIVE PRODUCTS AS DESCRIBED ABOVE.
(2) SFA COMPANIES SHALL NOT BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGE OR LOSS
WHATSOEVER.
(3) ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED TO ONE YEAR,
OTHERWISE THE REPAIR, REPLACEMENT OR REFUND AS PROVIDED UNDER THIS EXPRESS LIMITED
WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER, AND IS PROVIDED IN LIEU OF ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED.
(4) ANY MODIFICATION, ALTERATION, ABUSE, UNAUTHORIZED SERVICE OR ORNAMENTAL DESIGN VOIDS
THIS WARRANTY AND IS NOT COVERED BY THIS WARRANTY.
Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply
to you. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above
limitation or exclusion may not apply to you. This warranty gives you specic legal rights, and you may also have
other rights which vary from state to state.
SFA Companies
10939 N. Pomona Ave. Kansas City, MO 64153
816-891-6390
[email protected]