BLACKCOMB BC45 User manual
(MAX/ECO Mode)
Temp. Setting DOWN
Temp. Setting UP
With the unit standby (plug-in, without pressing
Power Button C to turn on), press and hold Button
D for 3 seconds to enter adjustment mode. Short
press Button D for times, with "F/C" flashing, press
Button A/B to toggle between Celsius & Fahrenheit.
(Default: °F)
2-1 MAX & ECO Mode
With the unit turned on(Press & Hold C/Power Button),
you can press the MODE Button D to toggle between
MAX or ECO compressor speed for the fridge.
With the unit turned on, the fridge's CURRENT interior
temperature reading will appear on the display, as a
solid / non-flashing number.
To change the fridge's set temperature: Press either the
temperature UP (A) or temperature DOWN (B) Button
to adjust the fridge's SET temperature.
The SET temperature will appear as a FLASHING
number, and after the temperature is SET , the display
will return to showing the fridge's CURRENT interior
temperature.
2-3 Setting Temperature
05
2-4 Triple Battery Protection Operation
With the unit turned on, short press Mode Button D
to adjust the level of the battery protection when
"H/M/L" appears.
NOTE: Details of Battery Protection Mode could be
found in Page 12.
LL
HH
NTC open circuit.
NTC short circuit.
Temperature too high or too low to protect the
compressor control module (when the environ
ment temperature is too high or too low, or
system load is too large, causing module/ECU
internal temperature 100 °C > or < - 10 °C)
BC45
BC60
BC74
(Default: M MODE)
BC45
BC65DZ
BC73DZ
BC60
BC74
This manual suits for next models
4
Table of contents
