Blitz SQ11 User manual

SQ11 Mini DVmanual

An attempt to decrypt the manual of this device from chinglish:
Power button
Mode button
LED red/blue
Charging:
Red flashing: charge done

Red on: charging
Red+blue flashing: rotection shutdown mode orSD card missing
Modes:
ower -> standby
Mode-> 720PO-Mode-> 1080PO-Mode-> 12MPixO-
720p: ower-> ***Record - ower-> standby
Long- ress- ower -> IR off **
1080p: ower-> ***Record - ower-> standby
3Sec-Mode-> ***Motion Record
12M ix: ower-> *Photo - ower-> standby
Long- ress- ower -> IR on **
6Sec- ower -> off
Details:
720p: ress Power, standby mode, blue LED is on.
ress Power, blue LED flashes 3 times. Video will save in 5min segments. ress Power
again to go back in standby.
1080p: ress Power, standby mode, blue LED is on.
ress Mode, purple(red and blue), LED stay on, 1080p standby mode.
ress Power, blue light turns off, red light blinks. Video will save in 5min segments. ress
Power again to go back in standby.
12Mpix: ress Power, standby mode, blue LED is on. Long-pressMode, for 2 red LED
blinks.
ress ower or Mode, red LED blinks for each photo.
Infrared on: ress Power, standby mode, blue LED is on. Long-press Powerfor 2 red LED
blinks.
Infrared off: ress Power, standby mode, blue LED is on, enter any recording mode. Long-
press Powerfor 2 red LED blinks.
720p Motion detection: ress Power, standby mode, blue LED is on.

Long-pressMode, for 3 seconds. Red LED flashes. Blue light on motion detect, urple
flash while recording. ress any button to stop
1080p Motion detection: same
• Setting the date and time
Connect the mini video camera to the computer. Setting the time is
done by creating a text file named «TIMERSET.txt» in the root
directory of the device's memory card, with the following content:
«YYYYMMDDHHMMSS» «Y» (or «N», if you do not want the date
and time stamp displayed on video files)
For example, «20170625140003 Y»
After saving the file, disconnect the video camera from the computer
and turn it on.