Blomberg B-Unit 5 Installation and operating manual

Bloomberg
Keyboard 5
HARDWARE
KEYBOARD 5
Installation & reference guide

The Bloomberg Keyboard 5 is a standard PC
keyboard that has been designed for use with
the Bloomberg Professional® service.
The Bloomberg Keyboard 5:
• Can be used with all standard PC applications.
• Is equipped with keys that have been specially
designed for use with the Bloomberg
Professional service.
• Features a BSAT (Bloomberg Secure Access
Technology) device for secure login to the
Bloomberg Professional service.
• Uses standard Windows USB drivers.
• Serves as a USB audio device for Bloomberg
and PC multimedia content.
• Provides an external speaker and microphone
as well as headphone and microphone jacks.
• Supports both split jack (two TRS connectors)
and integrated speaker/microphone headsets
(one TRRS connector).
Keyboard technical
information
System
Requirements
Software
Requirements
Power
Requirements
Windows 7
Windows 8
Windows 10
Bloomberg
Professional
service.
The keyboard is powered via USB
and must be plugged directly into
a PC USB port, a self-powered USB
hub or a self-powered USB KVM
switch. Self-powered devices are
powered by their own AC adapters.
The keyboard cannot be powered
by a bus-powered USB hub or
bus-powered USB KVM switch.

65
1
4
587
6
32
Keyboard features
1. Microphones
2. BSAT LED Indicator - LED color and pattern
to assist in using the BSAT
3. BSAT – Secure login to a user’s Bloomberg
account
4. Microphone and Speaker Volume
adjustment. Microphone LED indicates that
the microphone is active.
5. Speakers
6. BUNIT Dock – Dock for charging and
updating the B-UNIT 3 and greater.
7. Microphone Jack
8. Headphone Jack – supports headphones
and mobile headsets with integrated
microphones
Keyboard Specifications
Product Dimensions 17.8 x 6.3 x 0.9 inches (453 x 160 x 23 mm)
Product Weight 2lbs 6oz (1.08kg)
Power Supply DC 5V, 500mA

87
Bloomberg Professional
service configuration
Bloomberg
BSAT enrollment
Keyboard installation
Keyboard setup
1. Download and Install the Bloomberg Professional Application from
http://www.bloombergsoftware.com.
2. Launch the Bloomberg Professional application.
3. Type Alt-D to bring up the Terminal Defaults menu.
Note: You do not need to be logged in to adjust this setting.
4. Select the General tab.
5. From the Keyboard Type drop-down menu, select Bloomberg Keyboard.
6. Click OK.
The Bloomberg Keyboard 5 BSAT device has been designed with a touch
sensor to be used with any finger on the right or left hand. If you are
upgrading from the Bloomberg Keyboard 4, you will be asked to re-enroll.
If you would like to change your enrolled finger, contact Global Customer
support to have your BSAT enrollment reset. At the next login, you will be
prompted to go through the enrollment procedure.
To enroll using Bloomberg Secure Access Technology,
take the following steps:
1. Starting the enroll process:
a. If you are already logged into the Bloomberg Professional Application:
Run BA <GO> to start the enroll process.
b. If you are not logged into the Bloomberg Professional Application:
Launch the Bloomberg Professional application.
Press the Enter key to bring up the login page.
Enter your Login Name and Password.
1. Connect the USB cable to an available PC or self-powered
hub USB port.
2. Allow Windows to install the device drivers.
3. If upgrading from a previous Bloomberg Keyboard,
restart the Bloomberg application.

109
2. Check that you have read and agree to the Privacy Notice and click “Next”. 3. Verify your identity by entering your Login Name and Password and Click “Next”.

1211
4. Select the finger you would like to enroll and click “Next”. 5. To enroll your finger you will be asked to place your finger on the BSAT
sensor multiple times, lifting your finger between each placement. Follow
the on screen instructions to enroll your finger.

1413 14
6. If enrollment was successful click “Finish” to return to the login screen or to
continue working in the Bloomberg Professional application.
7. If the registration fails, follow the on screen instructions to repeat the
enrollment process.

1615
Keyboard: Set up your keyboard so it is flat to your work surface. Utilizing
a three-quarter inch support under the keyboard helps to accomplish a flat
surface. The mouse should be placed directly to the side of the keyboard to
prevent having to reach unnecessarily.
Chair: Adjust the height of your chair so that your feet are planted firmly on the
floor and your knees are bent at right angles.
Monitor: Position your computer screen directly in front of you (about two feet
away) so that the top of the screen is at or just below your line of vision.
Wrists: Wrists should be straight when typing, keeping forearms parallel to
the desk and elbows at right angles. Wrists should not be rested upon the
keyboard at any time during typing; instead, rest your wrists when you are not
typing. Stretching before and after typing may also help.
Breaks: Take brief breaks from typing throughout the day to give your wrists
a chance to “recharge.”
Tips for safe and
effective use of your
Bloomberg keyboard
If you have enrolled on a Keyboard 5 and a Keyboard 5 device is detected by
the Bloomberg Professional application, then you will be asked to login using
the Keyboard BSAT sensor.
1. Launch the Bloomberg Professional application.
2. Press the Enter key to bring up the login page.
3. Enter your Login Name and Password.
4. Place the enrolled finger on the BSAT sensor.
5. If successfully matched then you will automatically be logged in.
6. You will be allowed a number of attempts to match. If you fail to match then
you will be prompted to login again, where you may have the option to use
an alternate means of authentication.
Bloomberg BSAT login

1817
Product identification
Model Name: Keyboard 5
Manufacturer: Bloomberg LP
731 Lexington Ave
New York, NY 10022
[phone]
Made In: Mexico
Keyboard Localizations:
Arabic, Belgium, Brazilian, Chinese, Cyrillic, Danish, French,
German, Italian, Japanese, Korean, Latin America, Norwegian,
Portuguese, Simplified Chinese, Spanish, Swedish, Swiss German,
Turkish, UK English, and US English
When the new Bloomberg Keyboard 5 has been installed,
take the following steps:
1. Pack the former keyboard using the same container that
the new keyboard was shipped in.
2. Call the RMA Oce at one of the following locations
that serves your local region:
• US– 212-647-6535 or 877-830-6100
• EMEA [phone] or [e-mail]
• APAC [phone]
• LATAM [phone]
For 24-hour support, press the HELP key twice in the Bloomberg
Professional application or call the Global Customer Support Desk:
Returning the
former keyboard
• New York [phone]
• London [phone]
• Hong Kong [phone]
• San Francisco [phone]
• Frankfurt [phone]
• Singapore [phone]
• Sao Paulo [phone]
• Tokyo [phone]
• Sydney + 61 2 9777 8600

2019
Approvals
Note
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment o and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which
the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This Class B digital apparatus meets all requirements of the Canadian
Interference-Causing Equipment Regulations.
Cet appareil numérique de la classe B respecte toutes les exigences du
Règlement sur le matériel brouilleur du Canada.
Caution
Changes or modifications not expressly approved could void your authority to
use this equipment
FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation to the following
two conditions: (1) This device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may
cause undesired operation.
Industry Canada Statement
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables
aux appareils radio exempts de licence. L'exploitation est autorisée aux deux
conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2)
l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d'en compromettre le fonctionnement.