BlowHard Quickee Specification sheet

Information for use
Battery-Powered
Positive Pressure Fan
Quickee
Translation of the original information for use | V 1.0

BA_Quickee_EN_V10 V 1.0 II
Important information
These information for use contain important information for the
commissioning, operation, maintenance and disposal of the fan. You
will also find information and important instructions about your safety
as well as to help in the event of a problem. The information for use
belong to the fan and must be included if shared or sold.
The operator of this fan is responsible for ensuring that the
instructions and notes in this manual are read, understood and
followed by users before using the device.
Copyright
These instructions remain the copyrighted property of Vogt-CTE
GmbH. It is entrusted only to the buyers of the fans for personal use.
All rights, in particular the rights of copying and reproduction, are
reserved by Vogt-CTE GmbH. Violators will be liable for damages.
Exclusion of Liability
Manufacturer rejects any liability for damages caused by violations of
the instructions and notes listed in the information for use.
This applies in particular to:
•Damage caused by improper use and incorrect operation.
•Damage caused by the disregard of safety information in the
information for use or of warning notices attached to the fan.
•Damage due to insufficient maintenance or maintenance not
carried out.
Unauthorized conversions and changes to the device can affect the
safety and are not permitted. This may cause the product no longer to
meet product conformity requirements.

BA_Quickee_EN_V10 V 1.0 III
Contents
1Identification ........................................................................ 5
1.1 Contact information ............................................................... 5
1.2 Explanation of symbolic, visual information .......................... 5
1.3 Labels on the fan and in the information for use ................... 6
1.4 Location of instructions.......................................................... 7
1.5 Version / information on changes.......................................... 7
2Description of the fan ......................................................... 8
2.1 Glossary ................................................................................ 8
2.2 Function................................................................................. 8
2.3 Design ................................................................................... 9
2.3.1 Main components .................................................................. 9
2.3.2 Operating positions ............................................................... 9
2.4 Components ........................................................................10
2.4.1 Power supply .......................................................................10
2.4.2 Battery ................................................................................. 10
2.4.3 Battery Management System (BMS)...................................10
2.4.4 Electronic Speed Control (ESC).......................................... 11
2.4.5 Fan motor ............................................................................ 11
2.4.6 Propeller .............................................................................. 11
2.4.7 Locking lever for tilt adjustment........................................... 11
2.4.8 Control panel ....................................................................... 11
2.4.9 Attachment magnet .............................................................12
2.5 Options ................................................................................ 12
2.6 Technical data ..................................................................... 13
3Basic safety instructions.................................................. 14
3.1 Responsibility of the operator.............................................. 14
3.2 Personnel qualification ........................................................ 14
3.3 Intended use........................................................................ 14
3.4 Improper use .......................................................................14
3.5 Predictable misuse ..............................................................15
3.6 Residual risks ......................................................................15
3.7 Reduction of noise and vibration .........................................15
3.8 Safety instructions ............................................................... 15
3.8.1 Occupational safety .............................................................15
3.8.2 Technical condition of the fan.............................................. 15
3.8.3 Electrical parts .....................................................................16
4Preparing the fan for use.................................................. 17
4.1 Unpacking............................................................................ 17
4.1.1 Scope of delivery ................................................................. 17
4.2 Before commissioning ......................................................... 17
4.3 Transport and storage ......................................................... 17
5Operating the fan............................................................... 19
5.1 Setting up the fan ................................................................ 19
5.1.1 Operating environment........................................................19

BA_Quickee_EN_V10 V 1.0 IV
5.2 Control ................................................................................. 20
5.2.1 Control panel ....................................................................... 21
5.2.2 Meaning of the displays....................................................... 22
5.2.3 Battery mode ....................................................................... 24
5.2.4 230 V power-supply mode................................................... 24
6Cleaning and maintenance...............................................26
6.1 Cleaning .............................................................................. 26
6.2 Battery maintenance ........................................................... 26
6.2.1 Charging the battery............................................................26
6.2.2 Battery maintenance ........................................................... 27
6.2.3 Battery life............................................................................ 27
6.3 Repairs ................................................................................ 28
6.3.1 Replacement parts .............................................................. 28
7Troubleshooting ................................................................29
8Decommissioning, disposal............................................. 30

BA_Quickee_EN_V10 V 1.0 5
1 Identification
1.1 Contact information
Manufacturer
BlowHard Fans
1906 Rye Street SE
Albany, Oregon 97322/USA
Phone [phone]
Email [e-mail]
WWW www.blowhardfans.com
If you have questions, please have the following information ready:
•Your contact information
•Serial number of the fan
•Date of purchase
•Name of the dealer
1.2 Explanation of symbolic, visual information
When using these information for use, please pay special attention to
passages with the following signal words:
Danger
Refers to an imminent danger that can lead to the most serious
injuries to body and health or death.
Warning
Refers to a possible danger that can lead to the most serious
injuries to body and health or death.
Caution
Refers to a potentially dangerous situation that could result in
injuries or damage to property.
Attention
Refers to a potentially dangerous situation that could result in
damage to property.
Important
Refers to application and information for use and other useful
information.

BA_Quickee_EN_V10 V 1.0 6
Text formatting
Control elements or operation modes are printed in italics.
Example: Turn power knob.
1.3 Labels on the fan and in the information for use
Read the information for use before using
Wear protective gloves
Wear hearing protection and protective glasses
Wear safety shoes with protective toe caps
Recycle the product
Do not dispose of the product in the household waste
Warning of general danger
Warnung dangerous voltage
Warning against tipping
Warning of danger of crushing the fingers, hands, limbs
CE conformity labels
Copyright notice
Legal notice

BA_Quickee_EN_V10 V 1.0 7
1.4 Location of instructions
These information for use must be on the fan available to the users.
1.5 Version / information on changes
Product designation: Battery-Powered Positive Pressure Fan
Document designation: BA_Quickee_EN_V10
Edition
Date
Information on changes
V 1.0
Dec. 03, 2019
First edition

BA_Quickee_EN_V10 V 1.0 8
2 Description of the fan
2.1 Glossary
Term
Description
AC
Alternating Current.
AMCA standard
American standard for air power
measurement (Air Movement and Control
Association).
Ventilation mode
The fan at the low power level creates air
circulation in the room.
BMS
Battery Management System.
DC
Direct Current.
Trickle charging
The phase of continuous battery charging
after final charging has finished.
ESC
Electronic Speed Controller.
.
Explosive zone
Areas in danger of explosion.
Final charging
Second phase of battery charging, during
which the battery is charged from 90% to
100%.
IP 67
Degree of protection of the housing:
protection against short times under water.
Li-ion battery
Lithium-ion battery technology.
Positive pressure
mode
The fan at full power generates high
pressure, which pushes smoke and heat out
of the room.
Fast charging
First phase of battery charging, during which
the battery is charged up to approx. 90%.
2.2 Function
The Quickee is a portable, fully integrated, electrically operated
battery-powered positive-pressure fan designed for the following uses:
•Positive-pressure ventilation of rooms for fire brigades and
emergency service organizations.
•Optionally, a water mist ring can be used to reduce the heat
radiating from a fire.
•Optionally, spiral suction hoses can be used to suck out or push
out gases from rooms without an exhaust opening (so-called dead
rooms or trapped rooms).

BA_Quickee_EN_V10 V 1.0 9
Figure 2
Figure 3
2.3 Design
2.3.1 Main components
1Locking lever for tilt adjustment
2 Work light
3 Type label
4 Magnet to attach accessories
5 Fan grill
6 Handle
7 Carrying handle
8 Shoulder strap
9 Power plug 230 V (110 V)
10 Eyelets for shoulder strap
11 Control panel
12 Battery compartment with control electronics
13 Fan motor
14 Fan grill
2.3.2 Operating positions
Transport and storage
13
9
11
5
2
1
7
8
6
12
14
4
3
10
Figure 1

BA_Quickee_EN_V10 V 1.0 10
Figure 4
Figure 5
Room / positive-pressure ventilation
Fan facing downward
The fan blade housing can be opened up a maximum of 180° from the
folded (transport) position.
2.4 Components
2.4.1 Power supply
The fan receives its power supply from a 230 V power plug or from a
110 V power supply. This feeds the internal switching power supply,
which is equipped with integrated protection functions.
The fan consumes only about 4 A from a 230 V outlet. That means
two fans can be operated on one 230 V outlet with a 10 A fuse.
2.4.2 Battery
The fan is equipped with a lithium-ion battery pack. The battery pack
must always be charged according to the included charging
instructions to prevent damage or premature ageing (see
Chapter 6.2).
It is protected from overcharging, deep discharging, and excessive
temperature.
2.4.3 Battery Management System (BMS)
An integrated charger circuit in the BMS means there is no need for
an external battery charger. The battery is automatically charged
when the fan is switched off and is plugged into a 230 V power supply.
The BMS automatically protects the batteries from overcharging, deep
discharge, and excessive temperature.

BA_Quickee_EN_V10 V 1.0 11
Figure 7
An automatic power switch is also integrated in the BMS. When the
fan is plugged into a 230 V power supply, it switches to being powered
by the grid. The fan then runs at full power directly from the power
grid, thus protecting the batteries. If the power supply is interrupted, it
automatically switches to battery-powered operation.
2.4.4 Electronic Speed Control (ESC)
The integrated electronic speed control maintains a constant speed of
the brushless motor to ensure uniform air flow and constant air
pressure.
2.4.5 Fan motor
The fan motor is a compact, rugged DC motor with a neodymium
permanent magnet.
2.4.6 Propeller
The fan has a propeller specially designed for this usage. It reduces
air turbulence and air noise and creates a high level of air pressure.
2.4.7 Locking lever for tilt adjustment
1Locking lever for tilt adjustment
2 Brake disc
3 Brake shoes
The locking lever for tilt adjustment (1) must be used to position the
propeller housing or to change the tilt angle of the housing. Using this,
the propeller housing can be positioned smoothly in the desired
position using the handles.
2.4.8 Control panel
The fan is equipped with an easy-to-use control panel.
For more information, see Chapter 5.2.
1
2
3

BA_Quickee_EN_V10 V 1.0 12
Figure 9
Figure 10
Figure 11
Figure 8
2.4.9 Attachment magnet
A strong magnet is built into the centre of the fan grill (see Figure 1
(4)), to which accessories can be temporarily attached.
2.5 Options
Water mist ring
Output: 8 l/min.
Water mist ring
Output: 60 l/min.
Suction / ventilation tube

BA_Quickee_EN_V10 V 1.0 13
2.6 Technical data
Dimensions, weight
Total weight, including battery and
electronics
20.5
kg
Dimensions
534x534x248
mm
Performance
Operation time in positive pressure
ventilation mode
(at maximum power) (*)
45
min.
Operation time in ventilation mode (*)
4
h
Operation time with power grid connection
infinitely
Fan power (according to the AMCA)
19,369
m3/h
Power supply / battery
Charging time (up to 90%)
1.5 - 2
h
Charging time (final charging)
1
h
(Full) charging cycles
up to 500
Power consumption 230 V during fan
operation
8
A
Power consumption 230 V during battery
charging
4
A
Minimum output of emergency electrical
generator for power output (fan operation)
2.5
kW
Environment
Protection rating
IP 67
Operating temperature
-20 - +60
°C
Storage temperature (when charged)
0 - +50
°C
(*) The battery operation times provided refer to a battery in good
condition and to environmental temperatures within the positive range.

BA_Quickee_EN_V10 V 1.0 14
3 Basic safety instructions
The following basic safety instructions must be observed when
operating the fan.
It is essential to observe the warning and safety labels on the fan.
Safety regulations on operation and maintenance are listed in the
relevant sections and must be complied with!
3.1 Responsibility of the operator
•The operator must ensure that the fan is operated only by
authorized and trained personnel.
•The operator must ensure that users are familiar with the tactical
approach of positive pressure ventilation to achieve the best
results when ventilating.
•The operator must ensure that all users know the safety
regulations.
•The information for use must be available to the users and
accompany the fan at all times.
3.2 Personnel qualification
•Technical understanding is required to use this fan.
•The user must be aware of the safety regulations.
•The user must have tactical knowledge of positive pressure
ventilation and be able to provide documentation of successful
training.
•The user is obliged to read the information for use and to observe
the instructions provided. If parts of the information for use are not
understood, these points must be clarified with the manufacturer.
3.3 Intended use
•Positive-pressure ventilation of rooms for fire brigades and
emergency service organizations.
•Optionally, a water mist ring can be used to reduce the heat
radiating from a fire.
•Optionally, spiral suction hoses can be used to suck out or push
out gases from rooms without an exhaust opening (so-called dead
rooms or trapped rooms).
3.4 Improper use
•Use in hazardous areas
•Operation while disregarding safety regulations
•Operation using disabled, modified / defective safety equipment
•Operation using defective device parts and components

BA_Quickee_EN_V10 V 1.0 15
•Operation as a thrust device (creating movement with the air
pressure from the fan)
3.5 Predictable misuse
When operating the fan, please pay special attention to the following
instructions:
•Dangerous gases (e.g. exhaust from internal combustion engines,
etc.) must not be blown into a room by the airflow from the fan.
•Before using the device, the information for use must be read and
understood by the users.
3.6 Residual risks
Due to the ageing of the battery, the operating time may be shorter
than specified in the technical data. Therefore, connect a 230 V power
supply as soon as possible.
3.7 Reduction of noise and vibration
Prevent unnecessary noise as much as possible. To do that, set the
propeller speed to the lowest level needed for the current use
whenever possible. This also increases the battery operation time.
3.8 Safety instructions
3.8.1 Occupational safety
•Users must wear the personal protective equipment required by
national legislative or internal company accident prevention
regulations.
•Always wear protective glasses, hearing protection, work gloves,
and safety shoes.
•Country-specific statutory accident prevention regulations must be
complied with.
•Country-specific firefighting regulations must be complied with.
•Keep bystanders away from the area the fan is being used.
•Accessories may only be attached when the fan motor is switched
off or has been removed.
3.8.2 Technical condition of the fan
•The fan must only be used with the safety equipment installed, in
particular the protection grills on both sides of the propeller.
•Never use the fan if there is a known malfunction.
•Conversions and/or modifications to the fan are not permitted.

BA_Quickee_EN_V10 V 1.0 16
3.8.3 Electrical parts
•The supply voltage for charging the batteries must be 230 V / 50
Hz or 110 V / 60 Hz.
•When used outdoors, use only tested and approved extension
cords for the fan.
•Never touch damaged cables or connectors. Faulty cables must
immediately be replaced by a technician.
•Do not place the fan under water.
•Do not allow electrical connections or the plug to get wet.
•Before working on electrical installations, the fan must be switched
off and disconnected from the power supply.
•Because of the built-in battery, the components in the battery
compartment are also under electrical tension when the power plug
is not plugged in. During maintenance work on the inside of the
battery compartment, the battery pack must first be disconnected
(this work must only be carried out by specialists).

BA_Quickee_EN_V10 V 1.0 17
4 Preparing the fan for use
4.1 Unpacking
Take the fan out of the box and remove the padding.
If possible, the box and foam braces should be saved in case the
device needs to be returned later. If the fan needs to be returned later,
these packaging components will be very helpful, ensuring that
damage does not occur during transport.
4.1.1 Scope of delivery
The delivery includes the following components:
•Battery-Powered Positive Pressure Fan
•Shoulder strap
•Information for use
4.2 Before commissioning
Before commissioning, please carry out the following visual
inspection:
•The delivery is complete in according to Chapter 4.1.1.
•There are no parts that have come loose or been broken during
transport.
•The power knob on the control panel is not damaged.
If defects or missing parts are found upon receipt, immediately contact
the manufacturer or your dealer.
Important
After unpacking, the battery must immediately be charged
completely.
4.3 Transport and storage
For transport and storage, the fan is folded up (see Chapter 2.3.2,
Figure 3) and carried by the handles, the grips or the shoulder strap.
The fan must be stored in a dry place.
Warning Folding the fan
Danger of crushing!
When folding the device, do not place fingers/hands/body
parts between the protective grill and the battery
compartment.
Wear work gloves.

BA_Quickee_EN_V10 V 1.0 18
Warning
The fan can tip over or fall during
transport/setup
Danger of crushing body parts!

Secure the fan during transport and setup so that it does not
fall and only set the fan up on firm, level ground.
Wear safety shoes.
Important
Leave the fan plugged into a power outlet when it is not in use.
This will ensure that the battery is always charged!

BA_Quickee_EN_V10 V 1.0 19
5 Operating the fan
5.1 Setting up the fan
Before commissioning, place the fan on a flat, firm surface. Push the
tilt adjustment locking lever (Figure 1 (1)) and tilt the fan up into the
desired vertical position.
Warning Fan movement caused by air pushback
Risk of injuries caused by the fan moving or tipping over!

Set up the fan on a firm, level surface.
The fan must always be supported by all 4 feet.
Do not set up the fan on ice or slippery surfaces.
Do not move the fan when the motor is running.
Important
Set up the fan so that the air current is directed to the centre of
the input port.
Important
Before using the fan, ensure that you are familiar with the
tactical approach of positive pressure ventilation to achieve the
best results when ventilating.
5.1.1 Operating environment
The battery compartment with the control electronics is protected by a
thick housing (for IP protection level, see Chapter 2.6, Technical
data).
Danger Electrical voltage
Danger of injury or death due to electrical shock if the fan or the
electrical plug comes into contact with water!

Do not place the fan into water and do not immerse it.
Do not place the power plug or the extension cable plug in
water and do not immerse them.
Important
To ensure safe operation for everyone involved, if it is dark,
illuminate the entire work area and in particular the control
elements of the fan as well as the entire surrounding
environment of the rooms to be illuminated!

BA_Quickee_EN_V10 V 1.0 20
5.2 Control
Warning Rotating propeller blades
Danger of injury from rotating propeller blades!
Do not put objects through the protective grill.
Warning Rotating propeller blades
Danger of injuries if clothing or long hair becomes caught in the
rotating propeller blades!

Wear close-fitting clothing.
Wear a hairnet or helmet over long hair.
Do not wear rings, chains or other jewellery.
Warning
Objects are sucked in or blown out
Risk of injury especially to the eyes due to objects, such as
rocks, wood splinters, etc., sucked in or blown out!
Do not direct the air current towards people or animals.
Do not stand directly in the air current.
When wearing hearing protection, eye contact must be
maintained with other persons currently on duty.
Caution
Noise and high air speeds
in the air current
Danger of injuries to the hearing, the eyes, or other body parts
caused by rotating propeller blades!
Wear hearing protection, protective glasses / eye visors,
and work gloves.
When wearing hearing protection, eye contact must be
maintained with other persons currently on duty.
Caution
Dangerous gases in the air
Danger of injuries to the eyes, the skin, or respiratory organs
caused by dangerous gases escaping rooms under positive-
pressure ventilation!
Do not stay in areas where air is coming out of a room.
Wear protective glasses / eye visors.
Important
Due to the ageing of the battery and at low temperatures, the
operating time may be shorter than specified in the technical
data. Therefore, connect a 230 V power supply as soon as
possible.
Important
Optional accessories (water mist rings, ventilation tube, etc.)
must only be attached to or removed from the fan when it is
switched off (OFF position).