Blu SA3006 User manual

Ceramic Wall Hung Basin
Installation Guide
SA3006
SA3023
1 866 907 0122 blubathworks.com
2013-07
®

1 866 907 0122 blubathworks.com
2013-07
®
1
Attention — Before Installation
Your choice is a testimonial to your excellent taste. Thank you for choosing from among Blu’s quality line of products. We
recommend that you carefully read this installation guide to ensure your basin’s proper operation and reliability for many
years to come.
- We recommend that the installation be done by a minimum of 2 people as a security precaution. Also make sure
to adopt the proper posture when lifting the basin.
- Adhere to all local building and plumbing codes. The diagrams in this guide are not construction plans. They are
visual aids.
Installation Requirements
Please read the instructions carefully so as to avoid any damage to the fixture.
1. To ensure this product is installed properly, you must read and follow these guidelines.
2. The owner/user of the product must keep this information for future reference.
3. Consult local building codes to make sure the installation complies with standards.
4. Remove the unit from its packaging. Before disposing of it, inspect the unit to make sure its in good shape. Should
inspection reveal any damage or defect in the finish, contact your distributor. The warranty does not cover damages
or defects in the finish once it has been installed. Blu Bathworks’ responsibility for shipping damages ceases upon
delivery of the product in good order to the carrier. All complaints regarding damage due to transport must be made
directly to the carrier.
5. Place the unit in the bathroom before you start working. Conserve all nuts and bolts.
6. To protect the unit during installation, we recommend that you lay a piece of cardboard on the bottom.
7. If the unit is covered with polyethylene protective film, do not remove until installation is complete to grant maximum
protection. However, remove film where any two surfaces will be in permanent contact.
8. Verify that all dimensions on the plan are the same as the ones of the unit.
Technical Support Assistance
If further assistance is required, please contact:
Product Support at 1.866.907.0122 (09:00 – 17:00hrs PST) or email [email protected]
North America
Blu Bathworks Inc.
188 Smithe Street,Vancouver, BC, Canada, V6B 6A9
T +1.604.299.0122 F +1.604.299.0125

2
1 866 907 0122 blubathworks.com
2013-07
®
Installation Notes
Important! Install this product according to the installation guide. Product does have an overflow. Spout must provide a
minimum of 5” reach for adequate clearance into basin. Our products must be installed by certified professionals only
and according to our installation guide as well as federal, provincial / state and local building codes and regulations.
Installation Preparation
– Provide proper reinforcement, such as a brace, between the studs of the wall to help support the lavatory.
– Install the brace at the proper height, which corresponds to the bracket and lavatory mounting hole locations.
– Brace material must be of a material that cannot be crushed during installation of fasteners.
– For best results, the floor must be level and the wall must be square with the floor.
Installation for Wall-Hung Basins
LAVATORY INSTALLATION
1. Refer to the fixture and measure mounting hole location for accuracy.
2. Use a pencil to mark the location of the fixture mounting holes onto the mounting wall.
3. Measure and install recommended blocking to support vertical load. Ensure blocking member is secured into blocking
or solid wall structure. (Refer to diagram 2 for location.)
4. Lift and place the lavatory on to the wall and brace adequately so that the lavatory can not tip over.
Stud
Reinforcement brace – to width or greater of basin
Existing Wall
Recommend ½"- ¾" plywood
sheathing behind basin
1
2
Bowl
Recommended blocking
to support vertical load
+/- 2"- 4"

3
1 866 907 0122 blubathworks.com
2013-07
®
5. Check to make sure the lavatory is installed at the correct height and is level.
6. Mark and confirm the location of the mounting holes in the lavatory.
7. To help recall the lavatory position, trace a line along the sides and top edge of the lavatory.
8. Remove the lavatory and place on protected surface.
9. Install the faucets and drain (not supplied), if deck mounting is required, per the manufacturer’s installation instructions.
10. Return the lavatory into position with the marks on the wall and brace accordingly.
11. Install the lavatory mounting hardware. Place a metal washer onto a lag bolt. Ensure lag bolts are secured into the
horizontal bracing.
12. Insert the lag bolt through a mounting hole in the lavatory. NOTE: DO NOT SECURE BOLT AT THIS TIME.
13. Place the remaining metal washer onto the lag bolt. Insert the lag through the remaining mounting hole in the lavatory.
14. Level the lavatory with the mark along the top and sides of the lavatory.
15. Secure the lavatory to the wall.
WARNING: DO NOT OVERTIGHTEN. Overtightening may damage the products and cause personal injury and/or
property damage.
FAUCET AND DRAIN CONNECTIONS (NOT SUPPLIED)
1. Connect the water supply to the faucet according to faucet instructions.
2. Connect and tighten the trap to the drain.
3. Turn ON the water supplies to the faucet.
4. Purge air from the HOT & COLD water by running the water for a few seconds.
5. Fill the lavatory with water.
6. Check for leaks at the water supply and drain connections.
3
Stud
Reinforcement brace – to width or greater of basin
Existing Wall
Use brace under basin
to support vertical load
Recommend ½"- ¾" plywood
sheathing behind basin
4

4
1 866 907 0122 blubathworks.com
2013-07
®
where water meets modern®
188 Smithe Street, Vancouver, BC V6B 6A9 Canada | T1.604.299.0122 | TF 1.866.907.0122 | F 1.604.299.0125 | blubathworks.com
®
where water meets modern®
188 Smithe Street, Vancouver, BC V6B 6A9 Canada | T1.604.299.0122 | TF 1.866.907.0122 | F 1.604.299.0125 | blubathworks.com
®
warranty
terms and conditions
LIMITED FURNITURE RESIDENTIAL WARRANTY
Blu Bathworks®(“Blu”) furniture products are warranted to the original purchaser to be free from defects in all material and workmanship during normal
residential use for a period of five (5) years from the date of purchase. Blu will, at its election, repair, provide a replacement part or product, or make appropriate
adjustment, subject to the terms and conditions set forth in this warranty.
LIMITED CERAMICS RESIDENTIAL WARRANTY
Blu Bathworks®("Blu") ceramic products are warranted to the original purchaser to be free from defects in all material and workmanship during normal
residential use for a period of one (1) year from the date of purchase. Blu will, at its election, repair, provide a replacement part or product, or make appropriate
adjustment, subject to the terms and conditions set forth in this warranty.
LIMITED blu·stone™RESIDENTIAL WARRANTY
Blu Bathworks® ("Blu") blu·stone™products are warranted to the original purchaser to be free from defects in all material and workmanship during normal
residential use for a period of five (5) years from the date of purchase. Blu will, at its election, repair, provide a replacement part or product, or make appropriate
adjustment, subject to the terms and conditions set forth in this warranty. Blu Bathworks®does not recommend exceeding US/Canada maximum hot water
temperature regulations of 150°F/65°C, respectively. Exceeding stated temperatures could result in damage to blu.stone basins and bathtubs.
LIMITED ACRYLIC BATHTUBS RESIDENTIAL WARRANTY
Blu Bathworks®("Blu") acrylic bathtubs are warranted to the original purchaser to be free from defects in all material and workmanship during normal
residential use for a period of five (5) years from the date of purchase. Blu will, at its election, repair, provide a replacement part or product, or make appropriate
adjustment, subject to the terms and conditions set forth in this warranty.
LIMITED TAPWARE RESIDENTIAL WARRANTY
Blu Bathworks®(“Blu”) tapware products are warranted to the original purchaser to be free from defects in all mechanical parts and polished chrome finishes
during normal residential use for as long as the original purchaser owns his or her home. Blu will, at its election, repair, provide a replacement part or product, or
make appropriate adjustment, subject to the terms and conditions set forth in this warranty.
LIMITED ELECTRONICA TAPWARE RESIDENTIAL WARRANTY
Blu Bathworks®(“Blu”) electronica tapware products are warranted to the original purchaser to be free from defects in all electronic parts during normal
residential use for a period of five (5) years from the date of purchase. Blu will, at its election, repair, provide a replacement part or product, or make appropriate
adjustment, subject to the terms and conditions set forth in this warranty.
LIMITED COMMERCIAL WARRANTY
Blu Bathworks®("Blu") products are warranted to the original purchaser to be free from defects in all material and workmanship during normal usage for a period
of one (1) year from the date of purchase. Blu will, at its election, repair, provide a replacement part or product, or make appropriate adjustment, subject to the
terms and conditions set forth in this warranty.
This warranty applies only to Blu Bathworks®("Blu") products distributed in North America.
This warranty is non-transferable and is for the exclusive benefit of the original purchaser of a Blu product. This warranty may be exercised by the original
purchaser of a unit in a new residential development. Blu recommends using a professional plumber for all installation and repair. This warranty does not apply
to products that have been installed in any manner other than as set out in Blu’s printed instructions, or to products that have been altered in any way.
For further clarity, the above stated warranty does not cover or apply to damage attributable to:
(a) neglect, misuse, abuse, accident or negligence;
(b) normal wear and tear;
(c) dirt or lime scale, or the use of inappropriate cleaners (such as those containing abrasives, ammonia, acids, waxes, bleaches, solvents, alcohol, or any
product not recommended for chrome); and
(d) damage caused by transportation, or improper storage.
This is the only warranty of Blu, which makes no other warranty of any kind. Blu disclaims any liability for special, incidental or consequential damages. In no
event shall the liability of Blu under this warranty exceed the purchase price of the product.
PROCEDURE FOR WARRANTY SERVICE
Refer to blubathworks.com for policy and procedures relating to requests for service under the terms of this warranty.
Original proof of purchase is required. Blu is not responsible for removal or installation costs, or the costs of shipping and handling associated with any service.
Repaired or replaced products or parts are warranted only for the period remaining under the initial warranty.
®