Blu UNO PT7001 User manual

2014-06
1 866 907 0122 blubathworks.com
electronica wall-mount
control wheel kit
Installation Guide
PT7001
UNO · basin
PT7003
DUO·1 · bathtub
PT7005
DUO·2 · shower

2014-07
1 866 907 0122 blubathworks.com
1
Attention – Before Installation
1. Inspect this product to ensure you have all parts as shown that are required for proper installation.
2. This product must be installed by a professional contractor.
3. Refer to the specification and assembly drawings attached for installation directions.
Installation Requirements
Please read the instructions carefully so as to avoid any damage to the fixture.
1. To ensure this product is installed properly, you must read and follow these guidelines.
2. Be sure your installation conforms to local codes.
3. Refer to the specification and assembly drawings attached.
4. Use only a strap wrench or protected/smooth-jaw wrench on any finished surface.
5. Do NOT use putty during this installation.
Cleaners For Fittings And Accessories
To avoid damaging the surface and working components of the fittings, certain precautions must be taken in terms
of usage and subsequent cleaning as many cleaning agents contain acids for general cleaning and removing calcium
deposits. When caring for your fittings and accessories, please note the following:
- Only apply cleaners which are expressly intended for the use
- Never use any cleaner containing hydrochloric acid, formic acid or acetic acid on or near the fitting, as they can
cause considerable damage
- Do not use cleaners containing phosphoric acid
- Do not use cleaners containing chlorine bleach solutions
- Never mix or combine cleaning agents
- Abrasive cleaners and unsuitable scouring agents such as scouring pads
Technical Support Assistance
If further assistance is required, please contact:
Product support at 1.866.907.0122 (09:00 - 17:00hrs PST) or email
[email protected]
North America
Blu Bathworks Inc.
188 Smithe Street, Vancouver BC, Canada, V6B 6A9
T+1.604.299.0122 F+1.604.299.0125

2014-07
1 866 907 0122 blubathworks.com
2
Attaching the in-wall box for controller
• Prepare the wall to take the in-wall box. The installation of the in-wall box will depend on each individual
situation i.e. if there is access from behind the shower/tub/basin.
• A 14/7" (40mm) diameter hole is required if fitting the box from ‘behind’ and a 2 2/3" (68mm) diameter hole
if fitting from the ‘front’.
• Conduits should be used in the walls where necessary to protect the cables and allow maintenance.
• Attach the in-wall box using the screws supplied.
In-wall box attached from ‘behind’ In-wall box attached from ‘front’
NOTE: For PT7003 & PT7005, the control wheels can be installed either vertically or horizontally.
In case of vertical layout, the in-wall box must be positioned so that the openings at the
back are horizontal as shown in Fig.1.
1
Note: The diagrams in this install indicate single wheel for basin installation (PT7001).
For dual wheel installation (PT7003/PT7005) duplicate these steps.

2014-07
1 866 907 0122 blubathworks.com
3
Finish the wall
• Finish the wall by tiling etc. A 1 1/2" (40mm) diameter hole should be drilled in the tile
(or alternative wall surface) to finish.
• After installing the in-wall box(es), finished wall thickness may be 1" (25mm) maximum.
Hole size in tile or finished wall
2
1½"
[40]
1"
[25]
Tile or finished wall

2014-07
1 866 907 0122 blubathworks.com
4
3
4
• Draw a line around the bracket collar of the
in-wall box flush with the wall.
• Cut down the bracket collar of the in-wall box
as marked.
• Position the plastic adaptor ring inside the
round trim plate/foam gasket and fix through
the adaptor ring holes into the bracket collar
of the in-wall box using the (4) 15mm screws
supplied.
NOTE: This must be done manually.
DO NOT use an electric drill.
Round trim plate
& foam gasket
Adaptor
ring

2014-07
1 866 907 0122 blubathworks.com
5
5
6
• Feed the data cable of the controller unit through the
in-wall box collar.
NOTE: For ease of installation, the socket
can be taped to the wire.
• Position the control wheel into the bracket and turn
clockwise to lock in position.
• Push fit the ‘single’ control wheel onto the controller unit.
7
8
• For PT7003 & PT7005 repeat steps 1-6 for the second wheel.
• Connect the data cable(s) control to the relevant control mixer.
(see install guide for TEE015, TEE030 or TEE030S)

2014-07
1 866 907 0122 blubathworks.com
6
PT7001

2014-07
1 866 907 0122 blubathworks.com
7
PT7003

2014-07
1 866 907 0122 blubathworks.com
8
PT7005

2014-07
1 866 907 0122 blubathworks.com
9
where water meets modern®
188 Smithe Street, Vancouver, BC V6B 6A9 Canada | T1.604.299.0122 | TF 1.866.907.0122 | F 1.604.299.0125 | blubathworks.com
®
where water meets modern®
188 Smithe Street, Vancouver, BC V6B 6A9 Canada | T1.604.299.0122 | TF 1.866.907.0122 | F 1.604.299.0125 | blubathworks.com
®
warranty
terms and conditions
LIMITED FURNITURE RESIDENTIAL WARRANTY
Blu Bathworks®(“Blu”) furniture products are warranted to the original purchaser to be free from defects in all material and workmanship during normal
residential use for a period of five (5) years from the date of purchase. Blu will, at its election, repair, provide a replacement part or product, or make appropriate
adjustment, subject to the terms and conditions set forth in this warranty.
LIMITED CERAMICS RESIDENTIAL WARRANTY
Blu Bathworks®("Blu") ceramic products are warranted to the original purchaser to be free from defects in all material and workmanship during normal
residential use for a period of one (1) year from the date of purchase. Blu will, at its election, repair, provide a replacement part or product, or make appropriate
adjustment, subject to the terms and conditions set forth in this warranty.
LIMITED blu·stone™RESIDENTIAL WARRANTY
Blu Bathworks® ("Blu") blu·stone™products are warranted to the original purchaser to be free from defects in all material and workmanship during normal
residential use for a period of five (5) years from the date of purchase. Blu will, at its election, repair, provide a replacement part or product, or make appropriate
adjustment, subject to the terms and conditions set forth in this warranty. Blu Bathworks®does not recommend exceeding US/Canada maximum hot water
temperature regulations of 150°F/65°C, respectively. Exceeding stated temperatures could result in damage to blu.stone basins and bathtubs.
LIMITED ACRYLIC BATHTUBS RESIDENTIAL WARRANTY
Blu Bathworks®("Blu") acrylic bathtubs are warranted to the original purchaser to be free from defects in all material and workmanship during normal
residential use for a period of five (5) years from the date of purchase. Blu will, at its election, repair, provide a replacement part or product, or make appropriate
adjustment, subject to the terms and conditions set forth in this warranty.
LIMITED TAPWARE RESIDENTIAL WARRANTY
Blu Bathworks®(“Blu”) tapware products are warranted to the original purchaser to be free from defects in all mechanical parts and polished chrome finishes
during normal residential use for as long as the original purchaser owns his or her home. Blu will, at its election, repair, provide a replacement part or product, or
make appropriate adjustment, subject to the terms and conditions set forth in this warranty.
LIMITED ELECTRONICA TAPWARE RESIDENTIAL WARRANTY
Blu Bathworks®(“Blu”) electronica tapware products are warranted to the original purchaser to be free from defects in all electronic parts during normal
residential use for a period of five (5) years from the date of purchase. Blu will, at its election, repair, provide a replacement part or product, or make appropriate
adjustment, subject to the terms and conditions set forth in this warranty.
LIMITED COMMERCIAL WARRANTY
Blu Bathworks®("Blu") products are warranted to the original purchaser to be free from defects in all material and workmanship during normal usage for a period
of one (1) year from the date of purchase. Blu will, at its election, repair, provide a replacement part or product, or make appropriate adjustment, subject to the
terms and conditions set forth in this warranty.
This warranty applies only to Blu Bathworks®("Blu") products distributed in North America.
This warranty is non-transferable and is for the exclusive benefit of the original purchaser of a Blu product. This warranty may be exercised by the original
purchaser of a unit in a new residential development. Blu recommends using a professional plumber for all installation and repair. This warranty does not apply
to products that have been installed in any manner other than as set out in Blu’s printed instructions, or to products that have been altered in any way.
For further clarity, the above stated warranty does not cover or apply to damage attributable to:
(a) neglect, misuse, abuse, accident or negligence;
(b) normal wear and tear;
(c) dirt or lime scale, or the use of inappropriate cleaners (such as those containing abrasives, ammonia, acids, waxes, bleaches, solvents, alcohol, or any
product not recommended for chrome); and
(d) damage caused by transportation, or improper storage.
This is the only warranty of Blu, which makes no other warranty of any kind. Blu disclaims any liability for special, incidental or consequential damages. In no
event shall the liability of Blu under this warranty exceed the purchase price of the product.
PROCEDURE FOR WARRANTY SERVICE
Refer to blubathworks.com for policy and procedures relating to requests for service under the terms of this warranty.
Original proof of purchase is required. Blu is not responsible for removal or installation costs, or the costs of shipping and handling associated with any service.
Repaired or replaced products or parts are warranted only for the period remaining under the initial warranty.
®