BluDot Splash Coat Rack Quick start guide

Splash Coat Rack
DESIGNED IN 2010
ASSEMBLY NOTES | REV 00
@BLUDOT
We design all our pieces in our Minneapolis studio. Follow
along on Instagram for some sneak peeks into the process.
NEED A HAND?
Contact us at [email protected] or
844.425.8368 for assistance.

1 | 844.425.8368 BUB PENDANT
Leg
4QTY
PT. 1038
8QTY
PT. 4009
4QTY
PT. 9004
1QTY
Parts & Hardware

[e-mail] |2ASSEMBLY NOTES
PT. 1038 x 2
PT. 1038 x 6
PT. 9004 x 1
PT. 9004 x 1
Top view
Top view
Step 02
ATTACH REMAINING LEGS.
Finish attaching legs as shown using the
hardware provided. Tighten bolts after all legs
are attached.
Step 01
ATTACH LEGS.
Begin attaching legs as shown using the
hardware provided. Do not fully tighten the
bolts until after Step 02.

BLU DOT DESIGN & MANUFACTURING, INC. DESIGNED IN MINNEAPOLIS, MN
PT. 4009 x 4
Step 03
ADJUST LEGS.
If your coat rack does not appear to be level on
the ground then loosen and re-tighten bolts
after adjusting the legs.
The felt pads may also be added to the bottom
of one or more legs to level the legs on uneven
surfaces.
Additional Information
CLEAN
Clean with a slightly damp, soft cloth. To remove dirt and fingerprints, use a quality cleaner formulated
for wood or metal furniture. Wipe completely dry with a soft cloth in the direction of the wood grain.