Blue Microphones en CORE 200 Series User manual

rugged and versatile active dynamic microphone

congratulations
From Blue Microphones, makers of the finest studio
recording microphones you can nd, comes the en•CORE
200, a studio-grade handheld dynamic microphone designed to
deliver exceptional all-around performance, no matter what your
application. The en•CORE 200’s Proprietary Dynamic Capsule
is specially tuned by Blue’s capsule engineers to deliver natural
vocals, balanced highs, and amazing detail and clarity, with
electronically transformed output to provide remarkably high
gain. Coupled with Blue’s Active Dynamic phantom power circuit,
the en•CORE 200 is an incredibly versatile tool for live performance
as well as studio and broadcasting applications, providing
consistent tone and low noise in any setup. The unique, durable
nishes and high quality craftsmanship guarantee your en•CORE
mic will deliver the performance of a lifetime, for a
lifetime of performances.
2

key features
Proprietary Dynamic Capsule tuned for natural vocals and amazing detail and clarity
Blue’s innovative Active Dynamic phantom power circuit for consistent tone and minimal noise
Cardioid polar pattern delivers impressive off-axis noise rejection and high SPL handling
Blue’s proprietary capsule mount to deliver minimal handling noise without pads or filters
Stage-ready construction with heavy-gauge barrel construction, reinforced grill, and hardened
metal-plated finishes
Unique styling and craftsmanship, including hand-painted logo, laser-engraved trim ring and
CNC-machined grip detail
Includes soft-grip microphone clip and soft-lined storage pouch
tips for using your en•CORE 200
Your en•CORE 200 should be plugged into a mic-level input using a standard 3-pin XLR cable. The en•CORE 200
requires phantom power for proper operation and will not produce reliable, clean sound without 48 volt phantom
power. A status LED is located on the barrel opposite the Blue logo, and will light when proper phantom power is
being supplied.
The sound from your en•CORE microphone heavily relies on how you place the microphone relative to your sound
source. Generally, the closer you place the en•CORE 200 to a sound source, the higher the low frequency output,
referred to as “proximity effect.” So, if you want your vocals or instruments to have added punch, place the microphone
3

directly against the source. For a more natural sound, simply pull the source back from the microphone 2-4 inches.
For more tips on microphones and recording, be sure to visit www.bluemic.com.
care instructions
The en•CORE 200’s metal plated nishes will provide years of service and good looks if properly cared for.
To clean your en•CORE 200, simply wipe down with a damp cloth. Use of harsh cleaners or abrasives may cause
damage to your en•CORE’s surface nish.
The en•CORE 200 was designed for the rigors of daily use, and will stand up to demanding live performance or
recording environments. We know performances can get pretty intense out there, but try to avoid excessive physical
abuse or moisture exposure to the microphone — failure to do so could impact sound quality or reliability of your
en•CORE microphone.
Transducer
Polar Pattern
Frequency Response
Maximum SPL
Output Impedance
Sensitivity
Dimensions—Length
Dimensions—Diameter
Weight
tech specs
Dynamic Moving Coil
Cardioid
50Hz — 16kHz
147 dB SPL
25 ohms
2.25 mV/Pa
185mm/7.3in
28mm(50mm Max)/1.10in (1.97in max)
0.88 lbs/0.4 kG
4

5
90°
These charts are only a starting point for the sound provided. How the microphone reacts in a particular application will differ
greatly because of many variables, like room acoustics, distance from sound source (proximity), tuning of instruments, mic cabling
and other factors. For more tips on miking and recording techniques, check out the Blue website.
en
•
CORE 200
frequency response & polar patterns

architects specifications
The microphone shall be of the dynamic moving coil transducer type with
the transducer operating in a cardioid polar pattern. The frequency
response shall be 50Hz–16kHz. The microphone output impedance shall be
25 ohms. The microphone should have a sensitivity of 2.25 with a max sound
pressure level of 147. The microphone shall be 185mm/7.3in in length, and
28mm/1.10in(50mm/1.97in max)in diameter and weigh 0.88 lbs/0.4 kg. The
microphone shall be an en•CORE 200.
accessories
Included:
• en•CORE Soft-Grip Microphone Clip
• en•CORE Soft-Lined Storage Pouch
Check out www.bluemic.com for additional accessories and
replacement parts for your en•CORE Series Microphone.
6

warranty
Blue Microphones warrants its hardware product against defects in materials and workmanship for
a period of TWO (2) YEARS from the date of original retail purchase, provided the purchase was made from
an authorized Blue Microphones dealer. This warranty is void if the equipment is altered, misused, mishandled, maladjusted,
suffers excessive wear, or is serviced by any parties not authorized by Blue Microphones. The warranty does not include transportation
costs incurred because of the need for service unless arranged for in advance. Blue Microphones reserves the right to make changes
in design and improve upon its products without obligation to install these improvements in any of its products previously
manufactured. For warranty service or for a copy of Blue’s Warranty Policy including a complete list of exclusions and limitations,
contact Blue at 818-879-5200.
In keeping with our policy of continued product improvement, Baltic Latvian Universal Electronics (BLUE) reserves the right to
alter specifications without prior notice.
Designed in USA. Made in China.
7

www.bluemic.com
© 2010 Blue Microphones. All Rights Reserved. Blue Microphones, Blue Oval and en•CORE 200 are registered trademarks of Blue Microphones.