GXTSONIC KMB-200 User manual
BluetoothWIRELESSMIC
KMB‐200KARAOKESPEAKER
TheUserGuide
Thank you for choosing Wireless Bluetooth Mic PM20 Karaoke
Speaker is a karaoke Speaker with colorful led light function.
Please read this manual before usage.
Specification
zName: Wireless Bluetooth Mic
zItem NO.: KMB-200
zEcho & volume control
zRechargeable lion battery: 1200mA
zProduct size:85*60*230mm
zBluetooth version:V2.1+EDR
zPlaying Time :About 3hours
zTransmission distance:10m
zConnect your iPad, iPhone, iPod,Tablet device or CD player to
play music & sing along
zConnect to your TV for amplified sound and light
zEcho control,MP3 player integrated
Illustration
1. ON/OFF
2. ECHO
3. CHARGINGINDICATORLIGHT
4. BLUETOOTHINDICATORLIGHT
5. AUXIN
6. CHARGING
7. AUXOUT
Charging
Please make sure that the PM20 karaoke speaker is fully charged
before first use.
zConnect the product with USB cable.
zThe indicator will show red light when charging.
zThe indicator will turn off when fully charged.
Power On/Off
1. Short press the Power On/Off button (1) to turn it ON, then enter
the Bluetooth Pair Mode.
2. Shot press the Power On/Off button (1) to change the lighting
Mode.
3. double-click the Power on/off button (1) to disconnected current
Bluetooth device.
4. Long press the Power On/Off button to turn it OFF.
Aux in/out function
1. Connect one end of the 3.5mm audio cable to the AUX IN or out
socket (5) or (7) on the bottom of the unit.
2. Connect the other end to an earphone or line-out socket on the
audio device (Such as an MP3 player).
3. Press PLAY on the audio device and adjust the volume to your
desired lever.
Button ICON
1. Short press ECHObutton (2), ECHO volume up . Volume level
1=>2=>3=>4=>5=>1 …
2. Long press ECHO button (2) to play or pause the music.
Note: Play the last song or next song could be controlled by smart
phones, table PC, computer and etc.
Bluetooth Pairing
Play music from Bluetooth enabled devices, like smart phones, table
PC, computer and etc.
This speaker supports the Bluetooth device with A2DP function.
Press the power on button, then enter the Bluetooth mode.
Bluetooth indicate blue flicker alternately, together with voice
prompts, the speaker is in impairing state at this moment, and only
in the state Bluetooth can be impaired and connected successfully.
1. Mobile phone connection:
1. pen the Bluetooth setting on your phone or tablet and click
‘Search device’, cell phone will search for Bluetooth devices
automatically.
2. Find the Bluetooth Speaker name, click and connect it.
3. Enter ‘0000’ and click OK if there a prompt that requires you to
enter a password.
2. Bluetooth paring and connection
1. If the speaker has been connected with Bluetooth devices before,
it will connected the last Bluetooth device automatically once it is
turn on.
2. If the speaker has not been connected with Bluetooth device
before, it will enter impairing mode, click connection is achievable.
3. Other phone or tablets can not be connected with the Bluetooth
when the speaker is being connected with a phone or tablet.
4. The phone or tablets can not be connected with the Bluetooth if it
is connecting with other Bluetooth device. You should turn off your
Bluetooth connection and connect your phone with Bluetooth
speaker again.
Lamp function
1. Short press power button (2), turn on the light.
2. Short press power button to change the color.
STEP:
ON
=> level 1.Red
=> level 2.Dark Blue
=>level 3.Green
=>level 4.Pink
=>level 5.Sky Blue
=>level 6.cyclic change
=>level7. Along with the music rhythm changes (note: only when
Bluetooth mode)
=> OFF.
FAQ:
1 . The power light is not lit:
Please check the USB cable and charge it.
2 . The microphone has no sound.
Please turn PM20 power on and adjust the volume to big.
3 . The microphone has no echo.
Please adjust the echo to big.
4 . The sound has noise.
Please confirm whether environmental interference.
5 . The music is no sound.
Please adjust the volume from cell phone or adjust the knob
downward from KMB-200.
FCC Statement
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
• This device may not cause harmful interference.
• This device must accept any interference received, including interference that
may cause undesired operation.
2. Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Note:This equipment has been tested and found to comply with the limits for a class B
digital device,pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequence energy and,if
not installed and used in accordance with the instructions,may cause harmful
interference to radio communications.However,there is no guarantee that interference
will not accor in a particular installation.if this equipmemt does cause harmful
interference to radio or television reception,which can be determined by turning the
equipment off and on,the user is encouraged to try to correct the interference by one
or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an autlet on a circuit different from that to which the
receiver is connectec.
• Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure statement
The device has been evaluated to meet general RF exposure requirement.The
device can be used in protable exposure condition without restriction.
Table of contents
