Blue Octave Home B52 User manual
NO.1
NO.2
Front panel
NO.3
注：A4大小，105g铜版纸黑色双面印刷，根据虚线对折，封面在前.B8271BU-MF36(B52)-F38-18270-038
Features:
Quality 5.1 speaker system with built-in amplifier
Full audio spectrum performances, ideal for your favourite entertainment
from Mp3, Mp4, CD/DVD movies and digital playbacks
Specially designed woofer cabinet for bass and resolution
Comes with remote control and RCA cables
~120V 60Hz
W170xH312xD336(mm)
W105xH172xD112(mm)
ST-B Y/
SOURCE
/ TUNING +
/ TUNING -
(1)
(2)
(3)
(4)
(5)
4. ST-BY/
2. /TUNING+
5. SOURCE
1. -VOLUME+
3. /TUNING-
Operation explanation:
B52
DEAR CUSTOMER:
Thank you for buying this product !
Prior to first use, please read the manual carefully.
NOTE: 1. This unit is set on 2.1 mode upon startup, please press the 5.1/2.1
button for 5.1 surround sound.
2. To properly connect MP3,PC, you must use the enclosed 3.5 mm to RCA cable.
ST-BY/ Press to turn on speaker, long press into stand-by. PLAY/PAUSE
on the USB/SD/BL mode.
SOURCE Change the input mode.
-VOLUME+ Volume Up/Down
TUNING+/NEXT
TU NI N G- / PR E VI O US
Press once to increase the FM frequency 0.1M,long
press to the semi-automatic search for radio/Next track
in USB/SD/BL device
Press once to reduce the FM frequency 0.1M,long
press to semi-automatic search for radio/Previous
track in USB/SD/BL device
How to use the remote control
1.Start the main unit by pressing ST-BY.
2.Choose DVD input mode by pressing DVD.
3.Choose AUX input mode by pressing AUX.
4.Choose FM input mode by pressing FM.
5.Choose USB/SD input mode by pressing USB/SD.
6.Adjust the master volume by pressing VOL+/- at the rage of 0-30dB.
7.FRONT: To select the Front Speakers.The output level can then be
adjusted using the volume (up/down) keys.
8.SUB: To select the sub Speakers.The output level can then be adjusted
using the volume (up/down) keys.
9.SURR: To select the rear speakers.The output level can then be adjusted
using the volume (up/down) keys.
10.CENTER: To select the center speaker.The output level can then be
adjusted using the volume (up/down) keys.
700 Watts Total Power
Package contents:
subwoofer cabinet 1 pc
satellite speakers 5 pcs
User manual 1 pc
RCA CABLE 1 pc
FM ANT 1 pc
remote control 1 pc
3.5 mm RCA CABLE 1 pc
Drive Units: 3" x 5 full range magnetically shielded satellite
speakers + 5.25" powered subwoofer
5.1/2.1
5.1/2 .1
NO.5
* Do not leave objects generating magnetism near the speakers.
NO.6
NO.4
~120V 60Hz
System connection diagram
Rear panel
AC IN
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(11)
(12)
1. AUX input
2. FL/FR input
3. C/SW input
4. SL/SR input
5. FR output
6. FL output
7. SR output
8. SL output
9. C output
10.AC power supply cord
11. ANTENNA
12. Power ON-OFF
AC IN
SL/S R
11. Press “ TUNING+/- ” each time to search channel step by step
(each step 0.1MHz )，Press “ TUNING+/-” long time to search
channel,and play the channel automatically after finding the signal.
12.Press“ MEMORY” one time at FM mode to save channel.Press one
time，with the number of the current channel blinking，then press the
number of the channel or press PREV/NEXT to save the channel，then
press PLAY/PAUSE or memory to finish with the number of the saved
channel blinking two or three times.Repeat the above operation to
continue tosave other channel；press MEMORY for long time to
search and save channel.
13.Press “ BLUETOOTH ” buttons on the remote to convert to
Bluetooth input mode, LED display right bottom start to flashing (2
seconds) to search the Bluetooth device. Turn on your mobile
Bluetooth device and search the device name “ BT SPEAKER”, paired
them well. When you have successfully paired your mobile to the
speaker system, the LED right bottom stop flashing. When start to play
your mobile music, the LED flashed every one second. You can use
your mobile for “Previous / Next, Play/Pause, Volume + / -”functions,
and also “Mute, Volume+/-” functions can operate by the speaker
system.On BL mode, when connecting with mobile, press “ ” for 3
seconds, bluetooth function can be force-disconnected
14.Play the previous song by pressing “PREV” at USB/SD input mode.
15.Play the next song by pressing “NEXT” at USB/SD input mode.
16.Play or pause the music by pressing “PLAY/PAUSE” at USB/SD
mode.
17.Press “MUTE” to activate or deactivate mute,display blinks when at
MUTE mode.
18.Press the number “0-9” on remote control to choose the according
song at USB/SD.
19.Press the number “0-9” on remote control to choose the desired
channel in FM mode. (It skips three seconds after press the number key
or press PLAY/PAUSE to skip rapidly).
