Bluebird BP50 User manual

www.mypidion.com
User's Manual
∙Please read the following warnings before using the product.
∙Shapes and colors of the images shown in this manual may differ from the actual products.
∙Contents of the manuals may differ based on the software version of products or conditions of the wireless provider.
Android Business Pad
BP50

2
BP50 MANUAL
• This user manual is protected by copyright.
• This user manual has been created by the Bluebird Inc. We have done our best not to
create typos, editing errors, and leaving out any information. Please understand if there
are any inconveniences.
• This product’s program is legally protected. Illegal copying, transmitting, or erasing of
the program is prohibited.
• This product’s partial functions might have problems from the environment, user
program, and other machines.
• The radio equipment can’t be used for life saving services because there is possibility to
have radio interference and failure.
REGISTERED TRADEMARK
User’s guidance
BLUEBIRD is an emerging global brand, striving to lead the market
in performance and mobility. Their products represent reliability,
innovation, and innovative technology. Pidion is a registered
trademark from the global brand of Bluebird Inc. and is copyright
protected.
※Please read warnings and cautious before use.
Device type User’s guidance
Class B Device
(Household Infor-
mation and
Communication
Device)
This device has qualified the electromagnetic wave suitable
registration and can be used as a household device at a resi-
dential area as well as any other areas.
Type registration This wireless device may cause propagation interference, and
so, it cannot be used for life-saving services.

2
3
BP50 MANUAL
Part 15.105 (B)
Note : This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications, However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment o and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit dierent from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV technician for help.
Modications not expressly approved by the manufacturer could void the user’s authority to
operated the equipment under FCC rules.
FCC 15.407 (g) states
Manufacturers of U-NII devices are responsible for ensuring frequency stability such that an emission
is maintained within the band of operation under all conditions of normal operation as specied in
the users manual.
Since this is an Indoor Only device (required for this band) you do not need to worry about
the extreme frequency Stability over wide temperatures, but you can show that the frequency
Generation portion of this device (from the schematic) has its own stated stability that would never
allow the device to generate emissions or part of the spectrum outside of the authorized band (can
be determined by looking at the Occupied BW plots to see how much margin to the band edge is
available).
If the devices in the future use the other higher frequency UNII bands, and the devices can be
used outdoors, you may need to provide details of stability over a much wider temperature range
(depending on the use conditions stated in the manual).
Most compliance for this requirement is stated from the specication of the frequency generation
portion of the device and not necessarily through additional testing.
Hereby, Bluebird Inc. declares that this BP50 is in compliance with the essential
requirements and other relevant provisions of directive 1999/5/EC.
Use only power supplies listed in the user manual.
Adaptor Info
- Manufacturer : K-tect (Switching Power Supply)
- Model : KS038405
- Input : 100-240~0.4A, 50~60Hz
- Output : 5V / 3.0A
FCC (Federal Communications Commission)
CE
Warning label (IEC 60417-6044)
To prevent possible hearing damage, do not listen at high volume levels for long periods.
This device complies with Part 15 of the FCC`s Rules. Operation is subject to the following
two Conditions:
1. This device may not cause harmful interference, and
2. This device must accept ant interference received, including interference that may
cause undesirable operation.
This device complies with part 15 of the FCC Rules. Operation is subject to the condition
that this device does not cause harmful interference.
The antenna must be installed such that 0 cm is maintained between the antenna and
users, and the transmitter module may not be co-located with any other transmitter or
antenna.
End users cannot modify this transmitter device. Any Unauthorized modi cation could
void the user`s authority to operate this device.

4
BP50 MANUAL
Contents
Notice Before Using Device .................................... 5
Precautions Before Using Battery ............................. 6
About the product
1. Checking components .......................................... 7
2. Checking names of parts ........................................ 8
3. Features ......................................................... 9
Learning Basics
1. Insert / Remove the battery ..................................... 10
1-1. Insert the battery ........................................... 10
1-2 Remove the battery ......................................... 11
2. Insert / Remove the USIM card .................................. 12
2-1. Insert the USIM card ........................................ 12
2-2. Remove the USIM card ...................................... 13
3. Insert / Remove the microSD card ............................... 14
2-1. Insert the microSD card ..................................... 14
2-2. Remove microSD card ....................................... 15
4. To Connect the BP50 Power ..................................... 16
5. About battery ................................................... 18
Value Pack
1. LCD Protect Flim ................................................ 19
2. Smart Plug ...................................................... 21
Device Specifications ........................................... 28
Q & A ............................................................. 29
Service Center ................................................... 30
Warranty Certificate ............................................ 32

4
5
BP50 MANUAL
Notice Before Using Device
• This device is qualied for the standard of the safety of human body against
electromagnetic wave. For your own safety, please use certied devices provided by
headquarter.
If not the case, we cannot guarantee your safety.
• Do not press power button on the device if the device is wet or do not touch adapter or
power cord with wet hands. There is risk of electric shock.
• Do not remodel, take apart, or repair the device. Please refer to your customer service
center.
If not the case, you will not be able to get your free repair service.
• Please follow instructions when using the battery.
• Do not use your device at an explosive danger zone.
• In case your device is wet, do not put your device in heaters, microwaves, or etc to
dry- there is a risk of explosion or it can be the cause of malfunction.
(Please note there is a label in the device that changes color when it gets wet. In this case
you will not be able to get your free repair service.)
• Do not use your device when boarding a plane or inside of hospitals.
• Please backup the data and information from your device.
During the repair or upgrade, there is a slight possibility of your data being erased.
(Ring tones, text/voice message, characters will be reset.)
• Please refrain from using your device while driving. If you are in an unavoidable
situation, stop your vehicle or use your hand free kit.
• Do not use in places of high temperature and high humidity. The following can be the
causes of malfunction: getting wet from the rain, spilling drinks, and taking it in with you
at the sauna (high temp.)
In these cases, you cannot receive your free repair service.
• Do not place credit cards, phone cards, bankbook, and tickets next to the device.
The magnetic forces of the device can damage the information of listed item.
• Please avoid impacts or vibrations. When the device is not in use, unplug the power
cord and place it at a safe place where it won’t drop.
• Do not place your device at a dusty place. Keep your power cord away from any heating
devices. Unplug the power cord when cleaning. If there are any dusts or residue clean the
power cords pins thoroughly.
• When a battery is not in use for a long time, please charge and store it at room
temperature. Even for fully charged battery, the lifetime can be decreased because of its
own properties of voltage decrease.
• Do not paint your device. It can damage your screen or your device’s exterior.
Also, the paint can peel o and it triggers allergies. If there is allergic reaction, please nd
medical advice.
WARNING
This information is for your own safety.
Please observe the following precautions.

6
BP50 MANUAL
Precautions Before Using Battery
• If the battery is taken apart by impact, applied heat, submersion, or hole-drilling, there is
a risk of a dangerous explosion. Please keep away from children and animals.
• Leaving the battery in the vehicles under direct sunlight or any enclosed space with hot
temperature can deform or break down the battery.
• Please do not make any improper contact on battery contact pin with necklaces, coins
or any electric conductors. Do not give any impact by sharp object. There is a risk of
explosion.
• Please use only the designated battery for the device.
If the original battery is not used, the life of the device may decrease and there is a risk of
explosion. (In this case you cannot receive the free repair service)
• When charging the battery, you must use the supplied standard power adapter.
If the original adapter is not used, the battery life may decrease and may explode.
(In this case you cannot receive the free repair service)
• Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions.
WARNING
These are safety precautions in order to prevent a dangerous accident.
Please use the battery correctly and carefully observe the instructions.
1) Instructions regarding replacement batteries if the batteries are replaceable by the
user.
2) A lithium ion battery pack shall be marked with the following or equivalent:
“CAUTION: Risk of Fire and Burns. Do Not Open, Crush, Heat Above (50°C). Follow
Manufacturer’s Instructions.”
This wording or equivalent shall also be included in the instructions packaged with the
battery pack.

6
7
BP50 MANUAL
BP50 Main Body
Adaptor(Optional)
Cradle(Optional)
Snap-On(Optional)
About the product
1. Checking components
The images in this User’s Manual may not reect the color and shape of the
actual product.
Please contact the Customer Care Center if you wish to purchase any additional
or optional products.
LCD Protect Film(Optional)
USB Cable (Optional)

8
BP50 MANUAL
Power Button
Camera
Illuminance sensor
LED Flash
Button
Audio I/O
Battery Locker
Camera
Speaker
Battery LED
< Front >
< Rear >
Screen
Hand Strap
Holder
I/O Connector
Button
Micro HDMI Port
About the product
2. Checking names of parts
Hand Strap
Holder
Battery

8
9
BP50 MANUAL
Item Description
1. Power Button Turns on the device
2. Audio I/O
Can connect headphones and speakers, or other audio
devices.
Compatible (3.5mm jack)
3. Battery Locker Remove the battery, or when mounting.
4. Micro HDMI Port Digital audio and video devices can be connected.
Support to Micro HDMI (type D).
5. Hand Strap
Holder Can be connected to a hand strap.
6. microSD Slot External memory card slot
7. USIM Slot USIM card is inserted, the wireless network operators to
provide broadband network if necessary, can be used.
1
4
2
3
5
6
5
7
About the product
3. Features
The front panel includes the following features:

10
BP50 MANUAL
Push your battery in the direction of the arrow.
Please make sure to prevent reverse battery terminal position.
1. Insert / Remove the battery
Learning Basics
1-1. Insert the battery
1
2
3
WARNING
• Always use the special adapter provided with the product,
Please charge the battery in the charger.

10
11
BP50 MANUAL
1 Push your left battery locker in the direction of the arrow.
3 push the right battery locker, Lift the battery in the direction of the arrow.
2 Push your right battery locker in the direction of the arrow.
1-2. Remove the battery(Swich o BP50)
Learning Basics

12
BP50 MANUAL
1 Open the USIM card cover.
2 Slide out the USIM card in the arrow direction.
3 Close the USIM card cover.
Learning Basics
2. Insert / Remove the USIM card
2-1. Insert the USIM card

12
13
BP50 MANUAL
2 USIM card in the direction of the arrow and pull it out.
1 Open the USIM card cover.
3 Close the USIM card cover.
Learning Basics
2-2. Remove the USIM card

14
BP50 MANUAL
1 Open the microSD card cover.
2 Slide out the microSD card in the arrow direction.
3 Close the microSD card cover.
Learning Basics
3. Insert / Remove the microSD card
3-1. Insert the microSD card

14
15
BP50 MANUAL
2 microSD card in the direction of the arrow and pull it out.
1 Open the microSD card cover.
3 Close the microSD card cover.
Learning Basics
3-2. Remove microSD card

16
BP50 MANUAL
Learning Basics
4. To Connect the BP50 Power (Snap-on)
As you see in the picture, connect the adapter to snap-on.
WARNING
• When The battery of the device is low, it may warn you with a ring and a
message.
• The charging time can vary depending on the environment.
A new battery is only partially charged. Please charge fully before using.

16
17
BP50 MANUAL
Connect the adapter with the Cradle.
Learning Basics
4. To Connect the BP50 Power (Cradle)
• When The battery of the device is low, it may warn you with a ring and a
message.
• The charging time can vary depending on the environment.
A new battery is only partially charged. Please charge fully before using.
WARNING

18
BP50 MANUAL
5. About battery
Charging status indication
Power Off Sleep Power On
Not Charging off green blink green
Charging red orenge red
Charging
finished green green green
Battery LED
※ The charging indication lamp on the desktop charger and the terminal
are switched to green when charging is finished.
The battery will not be damaged if charging is continued.
※ The time required for charging is depending on the charging status.
If the charging time gets shorter by half, you need to purchase a new
battery.

18
19
BP50 MANUAL
Value Pack
1. LCD Protect Film
1. Components
LC Protection Film Manual
Plunger Cleaner

20
BP50 MANUAL
Value Pack
2. Manual