BlueHive 035-5406-4 User manual

12 V Bluetooth®
Receiver and USB Car Charger
User manual
Model no. 035-5406-4
WARNING!
• Make sure your connected device is firmly and securely fastened.
• Follow all applicable local laws and regulations concerning the use of a mobile device.
• The USB port is not designed for transferring data. Do not connect external data
storage products or any data transfer cables to the USB port.
• DANGER! Never let children play with packaging materials and this product. This
product is not a toy! Store the product and any accessories out of the reach of
children.
• Don't attempt to disassemble the unit or replace the battery.
• Do not throw device into fire.
• Keep device dry at all time.
• Avoid excessive drops, abrasions and punctures.
TM/MC

Key Parts Diagram
1 Microphone
2 LED indicator
3 Function key
4 3.5 mm Auxiliary Connection
1
8
23
7
4
5
6
5 12 V Plug
6 USB port (5 V 2.1 A)
7 Input port (DC 5 V)
8 Charging connector

LED Indicator
Bluetooth®Receiver Status
Power on
Bluetooth®pairing
Low battery
Charging
Fully charged
Connected
LED Indicator
Blue light flickers three times
Blue and red light flickers alternatively
Red light flickers
Red light is on
Red light is off
Blue light flickers
Sounds & Voice Prompt Functions
Function
Powering on the receiver
Powering off the receiver
Power one and pairing
Disconnecting from Bluetooth®
Bluetooth®connected
Low battery power
Voice prompt
Power on
Power off
Bluetooth mode
Disconnected
Connected
Please charge

Playback of Audio Playlists
USB Bluetooth®
Important: Please fully charge the battery for the first time use.
Firmly insert the Charging connector (8) into Input port (7) of Bluetooth®
Receiver, Plug 12 V Plug (5) into vehicle's 12 V outlet. The red charging
indicator will light up and it will turn off once fully charged.
It takes 2 hours to fully charge the unit.
Charging Bluetooth®Receiver
Operation
RDM
AUX IN
RPT
456
8
5
7
3

1. Plug the Bluetooth® Receiver into the
3.5 mm Auxiliary (AUX) Connection
port of vehicle or other devices with
AUX port.
2. Long press the function key (3) for a
few seconds, blue light flickers three
times and with prompt of "power on"
and "Bluetooth® mode", blue and red
light flickers alternatively to indicate
the Bluetooth® Receiver is in pairing
mode.
3. Go to the Bluetooth® settings menu on
your phone / tablet / Bluetooth®
devices. Make sure that Bluetooth®is
turned on. Connect to the device listed
as"035-5406-4". Blue light flickers
and with prompt of "connected"
indicates your device has been
successfully connected and is ready
to use.
Attention: Please charge your Quick Charge 3.0 enabled devices from
Quick Charge 3.0 USB output using original cable to connect.
Power off the Bluetooth® Receiver after use.
Important: Ensure the engine is turned on and the vehicle's audio system is
on.
035-5406-4 Connected
MY DEVICES
Bluetooth
Bluetooth
Sengs

Press Function key (3) once to answer calls.
Press Function key (3) once to end calls.
Long press Function key (3) to reject the calls.
Answering, Ending and Rejecting Calls
Insert 12 V plug (5) into the vehicle's 12 V outlet.
Connect your mobile device to USB port (6) with a charging cable (not
provided).
Charging electronic devices
6
5

You can play music and charge your phone/tablet/Bluetooth®devices at the
same time if your devices have low battery power.
AUX IN

Made in China
Imported by Trileaf Distribution Toronto, Canada M4S 2B8
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such marks by Shenzhen HS Joint
Technology Co., Ltd is under licence. Other trademarks and trade names are
those of their respective owners.
Product must be recycled or disposed of properly. Dispose of as per
the requirements of your local municipality.
SPECIFICATIONS:
Input: DC 12 V
Battery: 90 mAH Rechargeable Battery
Effective Range: 10 m (33')
Charging time: 2 hours
Working time: 6 hours
Standby time: 8 hours
Car Charger USB output: 5 V/2.1 A