
Introduction
This document covers the re-installation of the “demo” content for the Roku HD1000. This
document is distributed within a zip file containing the demo content.
Your Roku HD1000 came with a selection of demo content from the factory. However, for a
number of reasons you may no longer have that content on your HD1000. This document
describes how to make this content accessible once again.
Installing the Built-In Content on a Network Share
It is not necessary for the content that was originally in the “Built-In” media source to reside
there. You may copy it to any HD1000-accessible network share.
To do this, copy the contents of the zip file containing this document to any HD1000-
accessible network share. You may consider keeping it in its own directory, for example a
directory named “HD1000Demo”.
Once copied, you can refresh the contents of the network share on your HD1000 by
highlighting the network share in the HD1000 main menu and pressing select on your remote
control. This will cause the HD1000 to look for new content.
Installing the Built-In Content onto the HD1000’s internal
memory
If you want to access the content as it was accessed when your HD1000 was new, you will
need to copy the content using Roku’s Copy utility. It is available at
http://www.rokulabs.com/support/downloads/additionalapps.php.
1. Copy the content to be copied to a flash card or network share. Isolate the content by
putting it in its own directory on the flash card or network share.
2. If you have copied it to a flash card, insert the flash card into the HD1000. If you have
copied it to a network share, make certain that the network share is mounted by the
HD1000.
3. Launch the Copy utility. How this is done depends on how you installed the Copy
utility. Please see the documentation included with the Copy utility for more
information.
2 of 4 © 2003 Roku, LLC. All rights reserved. ROKU and the ROKU logo are
trademarks of Roku, LLC in the United States and other countries.