Bluvision BluFi User manual
WWW.BLUVISION.COM
QUICK GUIDE
BluFi is an amazing BLE to WiFi Gateway that eliminates
the dependency for mobile devices end user apps being in
proximity to beacons. BluFi allows for the capture in real-time
of beacon advertisements which then returns the data back to
your or our cloud/server via WiFi.
BluFi features a simple plug-in module to bridge beacons into
existing WiFi connections to receive and transmit Bluetooth
beacon payload data over WiFi.
BluFi is part of the BEEKS™ Bluetooth beacon platform that
interfaces with BluZone™, the cloud-based developer hub to
control and manage your beacon projects.
Bluetooth to WiFi Gateway
This guide gets you started with the link to download the
BluFi conguration app that will allow you to congure and
receive important information on BluFi Gateways. We will
also help you setup your device for initial testing.
Visit: bluvision.com/developer/ rst to register and then
access connection utility and tools.
quick start
BluFi is a BLE scanner that connects to a desired AC outlet
and constantly scans for Bluetooth Low Energy (BLE)
packets within its range and sends them over WiFi to the
cloud/backend server.
Virtually any working beacon broadcasting within the range
of a BluFi is picked up by a BluFi device which then records
all BLE broadcast packet payloads with a time stamp.
Those are then forwarded to the cloud/backend server.
how it works
how to set up
• Plug BluFi into desired AC Outlet*
• Register at bluvision.com/developer for access to APIs
and latest updates to learn how to connect your
enterprise server to our BluZone™ cloud
• Follow Instructions in the BluZone cloud -- Getting
Started guide at bluvision.com/developer/getting-
started-bluzone to provision and connect your BluFi
device to the BluZone cloud
*Terms and conditions apply, visit www.bluvision.com
Read all safety warnings on-line and instructions before operating BluFi. Do not use in rain or on wet surfaces.
HAZARD OF ELECTRICAL SHOCK if used on wet surface or the rain. For PLUGGABLE EQUIPMENT, the socket-
outlet shall be installed near the equipment and shall be easily accessible. Temperature Range: -20°C to 65°C.
This transmitter should be installed and operated with a minimum distance of 20 centimeters between the radiator
and your body and must not be co-located or operating in conjunction with any other antenna or transmitter.
Do not use this product for other than its intended use.
FCC ID: SL6-BEEKSBLUFI
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired operation.
Changes or modications not expressly approved by the party
responsible for compliance could void the user’s authority to operate
the equipment.
FCC statement
You can download the latest user guide and
updates by registering at our developer portal
bluvision.com/developer
© 2015 BluFi, Bluvision and BluZone are trademarks of Bluvision, Inc.
All other trademarks are property of their respective owners.
Table of contents
