BM IPE-WALLMOUNT User manual

BizVideo SV3100 - Wall Mount Kit
Part# IPE-WALLMOUNT

Kit Contents
1 x Wall Mount Bracket
1 x ¼ UNC x ¼ Camera Mount Screw
2 x 8G x 38mm Phillips Self Tapping Screws
2 x 6G x 38mm Phillips Self Tapping Screws
2 x Nylon Plasterboard Anchors
1 x Mounting instruction sheet
Warnings
•Choking Hazard –Keep small parts away from Children
•Always use safety glasses and apparel when using Power
Tools
•Be careful when drilling into plasterboard walls to ensure
there are no electrical cables where you intend to mount
this device
•Seek professional advice if you are not confident with this
task
•Recycle packaging responsibly

Instructions
•Select a position so the camera is at a good level to the
audience for best viewing.
•The Wall mount bracket can be installed with the base
pointing up or down depending on your requirements or
aesthetics.
•Fix the bracket to the wall using the screws provided. Use
the 8G screws if fixing directly to a stud beam or the 6G
screws and Nylon Plasterboard anchors if fixing into
drywall/plasterboard sheet.
•You can use the bracket as a template for the screw hole
position.
•Ensure the bracket base is horizontal/level so the camera
moves from side to side smoothly.

•Ensure the DIN connector or cable does not have a sharp
bend or forces pressure on the Camera’s DIN connector as
this may void the Camera’s warranty.
For further information, contact your place of purchase (Authorised
Leader Dealer) or Leader National Sales Line: 1300 4 LEADER
or for Warranty/Support: [e-mail]