BMW Motorrad R 1250 R Installation and maintenance manual

RIDER'S MANUAL
R 1250 R
BMW
MOTORRAD
MAKE LIFE A RIDE

Vehicle data
Model
Vehicle Identification Number
Colour code
Date of first registration
Registration number
Dealership details
Person to contact in Service department
Ms/Mr
Phone number
Dealership address/phone number (company stamp)

YOUR BMW.
We congratulate you on your choice of a vehicle from
BMW Motorrad and welcome you to the community of BMW
riders. Familiarise yourself with your new vehicle so that you can
ride it safely and confidently in all traffic situations.
About this rider's manual
Read this rider's manual carefully before starting to use your new
BMW. It contains important information on how to operate the
controls and how to make the best possible use of all your BM-
W's technical features.
In addition, it contains information on maintenance and care to
help you maintain your vehicle's reliability and safety, as well as
its value.
If the time comes to sell your BMW, please remember to hand
over this rider's manual to the new owner. It is an important part
of the vehicle.
We hope you will enjoy riding your BMW and that all your jour-
neys will be pleasant and safe
BMW Motorrad.

01 GENERAL
INSTRUCTIONS 2
Quick & easy reference 4
Abbreviations and sym-
bols 4
Equipment 5
Technical data 5
Currency 6
Additional sources of
information 6
Certificates and operat-
ing licences 6
Data memory 6
Intelligent emergency
call system 11
02 GENERAL VIEWS 16
General view, left side 18
General view, right
side 19
Underneath the seat 20
Multifunction switch,
left 21
Multifunction switch,
right 22
Multifunction switch,
right 23
Instrument cluster 24
03 STATUS
INDICATORS 26
Indicator and warning
lights 28
TFT display in
Pure Ride view 29
TFT display in Menu
view 30
Warning indicators 31
04 OPERATION 60
Ignition switch/steer-
ing lock 62
Ignition with Key-
less Ride 64
Emergency-off switch
(kill switch) 68
Intelligent emergency
call 69
Lights 71
Daytime riding light 73
Hazard warning lights 75
Turn indicators 75
Traction control (ASC/
DTC) 76
Electronic Suspension
Adjustment (DESA) 77
Riding mode 80
Riding mode PRO 82
Cruise control 83
Hill Start Control
(Hill Start Control) 85
Shift light 88
Anti-theft alarm (DWA) 88
Tyre pressure control
(RDC) 91

Heated grips 91
Front and rear seats 92
05 TFT DISPLAY 94
General notes 96
Principle 97
Pure Ride view 103
General settings 104
Bluetooth 106
My vehicle 109
Sport 112
Navigation 114
Media 116
Telephone 116
Display software ver-
sion 117
Display licence in-
formation 117
06 ADJUSTMENT 118
Mirrors 120
Headlight 121
Clutch 122
Gearshift lever 123
Brakes 123
Footrests 125
Spring preload 126
Damping 127
07 RIDING 130
Safety information 132
Regular check 134
Starting 135
Running in 138
Shifting gear 139
Brakes 140
Parking your motor-
cycle 143
Refuelling 144
Securing motorcycle
for transportation 149
08 ENGINEERING DE-
TAILS 152
General notes 154
Antilock Brake Sys-
tem (ABS) 154
Traction control
(ASC/DTC) 157
Dynamic engine
brake control (MSR) 160
Dynamic ESA 160
Riding mode 161
Dynamic Brake Con-
trol 163
Tyre pressure control
(RDC) 164
Gear Shift Assistant 166
Hill Start Control
(Hill Start Control) 167
ShiftCam 168
09 MAINTENANCE 170
General notes 172
Toolkit 173
Service tool kit 173
Front-wheel stand 174
Rear-wheel stand 174
Engine oil 175
Brake system 177

Clutch 181
Coolant 181
Tyres 182
Rims and tyres 183
Wheels 183
Silencer 190
Air filter 191
Lighting 193
Jump-starting 199
Battery 201
Fuses 205
Diagnostic connector 206
10 ACCESSORIES 208
General notes 210
Power sockets 210
Cases 211
Topcase 214
Navigation system 217
11 CARE 222
Care products 224
Washing the vehicle 224
Cleaning easily dam-
aged components 225
Care of paintwork 226
Paintwork preserva-
tion 227
Laying up the motor-
cycle 227
Restoring motorcycle
to use 228
12 TECHNICAL DATA 230
Troubleshooting chart 232
Screw connections 234
Fuel 236
Engine oil 237
Engine 237
Clutch 238
Transmission 238
Rear-wheel drive 239
Frame 239
Chassis and
suspension 239
Brakes 240
Wheels and tyres 240
Electrical system 241
Anti-theft alarm 242
Dimensions 243
Weights 243
Riding specifications 244
13 SERVICE 246
Reporting safety-rel-
evant defects 248
BMW Motorrad
Service 249
BMW Motorrad
Service history 249
BMW Motorrad Mo-
bility services 250
Maintenance work 250
BMW Motorrad
Service 250
Maintenance sched-
ule 252
Maintenance confirm-
ations 253

Service confirmations 265
APPENDIX 268
Declaration of Con-
formity 269
Certificate for elec-
tronic immobiliser 274
Certificate for Key-
less Ride 277
Certificate for tyre
pressure control
(RDC) 281
Certificate for TFT
instrument cluster 282
INDEX 286

GENERAL
INSTRUCTIONS
01

QUICK & EASY REFERENCE 4
ABBREVIATIONS AND SYMBOLS 4
EQUIPMENT 5
TECHNICAL DATA 5
CURRENCY 6
ADDITIONAL SOURCES OF INFORMATION 6
CERTIFICATES AND OPERATING LICENCES 6
DATA MEMORY 6
INTELLIGENT EMERGENCY CALL SYSTEM 11

4 GENERAL INSTRUCTIONS
QUICK & EASY REFERENCE
An important aspect of this
rider's manual is that it can be
used for quick and easy refer-
ence. Consulting the extensive
index at the end of this rider's
manual is the fastest way to
find information on a particu-
lar topic or item. To first read
an overview of your motor-
cycle, please go to Chapter 2.
All maintenance and servicing
work on the motorcycle is doc-
umented in the “Service” sec-
tion. The record of the main-
tenance work you have had
performed on your vehicle is
a precondition for generous
treatment of goodwill claims.
ABBREVIATIONS AND SYM-
BOLS
CAUTION Low-risk haz-
ard. Non-avoidance can
lead to slight or moderate in-
jury.
WARNING Medium-risk
hazard. Non-avoidance
can lead to fatal or severe in-
jury.
DANGER High-risk haz-
ard. Non-avoidance leads
to fatal or severe injury.
ATTENTION Special notes
and precautionary meas-
ures. Non-compliance can lead
to damage to the vehicle or ac-
cessory and, consequently, to
voiding of the warranty.
Specific instructions on
how to operate, control,
adjust or look after items of
equipment on the motorcycle.
Instruction.
Result of an activity.
Reference to a page
with more detailed
information.
Indicates the end of
a passage relating to
specific accessories or
items of equipment.
Tightening torque.
Technical data.
NV National-market ver-
sion.
OE Optional equipment.
The vehicles are
assembled com-
plete with all the
BMW Motorrad
optional equipment
originally ordered.

5
OA Optional accessories.
You can obtain
BMW Motorrad
optional accessories
through your author-
ised BMW Motorrad
dealer; optional
accessories have to
be retrofitted to the
vehicle.
ABS Anti-lock brake sys-
tem.
ASC Automatic Stability
Control.
EWS Electronic immobiliser.
D-ESA Electronic chassis and
suspension adjust-
ment.
DTC Dynamic Traction Con-
trol.
DWA Anti-theft alarm.
RDC Tyre pressure monitor-
ing.
EQUIPMENT
When you ordered your
BMW Motorrad, you chose
various items of custom
equipment. These operating
instructions describe the
optional equipment (OE)
offered by BMW and selected
optional accessories (OA).
This explains why the manual
may also contain descriptions
of equipment that you might
not have selected. Please
note, too, that on account of
country-specific differences,
your motorcycle might not be
exactly as illustrated.
If your motorcycle contains
equipment that has not been
described, its description can
be found in a separate manual.
TECHNICAL DATA
All dimensions, weights and
power ratings stated in the op-
erating instructions are quoted
to the standards and comply
with the tolerance require-
ments of the Deutsches Institut
für Normung e.V. (DIN).
Technical data and specific-
ations in this rider's manual
serve as reference points. The
vehicle-specific data may de-
viate from these, for example
as a result of selected optional
equipment, the national-mar-
ket version or country-specific
measuring procedures. De-
tailed values can be taken from
the vehicle registration docu-
ments, or can be obtained from
your authorised BMW Motorrad
retailer or another qualified
service partner or specialist

6 GENERAL INSTRUCTIONS
workshop. The specifications in
the vehicle documents always
have priority over the inform-
ation provided in this rider's
manual.
CURRENCY
The high safety and quality
standards of BMW motor-
cycles are maintained by
constant development work
on designs, equipment and
accessories. Because of this,
your motorcycle may differ
from the information supplied
in the Rider's Manual. Nor can
BMW Motorrad entirely rule
out errors and omissions. We
hope you will appreciate that
no claims can be entertained
on the basis of the data,
illustrations or descriptions in
these operating instructions.
ADDITIONAL SOURCES OF
INFORMATION
Authorised BMW Motorrad
retailer
Your authorised
BMW Motorrad retailer
will be happy to answer any
questions you may have.
Internet
The rider's manual for your
vehicle, operating and installa-
tion instructions for accessories
and general information about
BMW Motorrad, in relation to
technology, for example, are
available for download from
bmw-motorrad.com/manuals.
CERTIFICATES AND OPERAT-
ING LICENCES
The certificates for the vehicle
and the official operating li-
cences for accessories can be
downloaded from
bmw-motorrad.com/certifica-
tion.
DATA MEMORY
General
Control units are installed in
the vehicle. Control units pro-
cess data that they receive, for
example, from vehicle sensors,
or that they generate them-
selves or exchange between
each other. Some control units
are required for the vehicle to
function safely or provide as-
sistance during riding, for ex-
ample assistance systems. In
addition, control units enable
comfort or infotainment func-
tions.

7
Information on data that has
been stored or exchanged can
be obtained from the manufac-
turer of the vehicle, for example
via a separate booklet.
Personal reference
Each vehicle is identified with a
clear vehicle identification num-
ber. Depending on the coun-
try, the vehicle identification
number, the number plate and
the corresponding authorities
can be referenced to ascertain
the vehicle owner. There are
also other ways to use data ob-
tained from the vehicle to trace
the rider or vehicle owner, for
example using the Connected-
Drive user account.
Data protection rights
In accordance with applicable
data protection laws, vehicle
users have certain rights in re-
lation to the manufacturer of
the vehicle or in relation to
companies which collect or
process personal data.
Vehicle users have the right to
obtain full information at no
cost from persons or entities
storing personal data of the
vehicle user.
These entities may include:
Manufacturer of the vehicle
Qualified service partners
Specialist workshops
Service providers
Vehicle users have the right to
request information on what
personal data has been stored,
for what purpose the data
is used, and where the data
comes from. To obtain this
information, proof of ownership
or use is required.
The right to information also
includes information about
data that has been shared with
other companies or entities.
The website of the vehicle
manufacturer contains the
applicable data protection
information. This data
protection information includes
information on the right to
have data deleted or corrected.
The manufacturer of the vehicle
also provides their contact
details and those of the data
protection officer on their
website.
The vehicle owner can also re-
quest that a BMW Motorrad
Retailer or another qualified
service partner or specialist
workshop read out the data
that is stored in the vehicle for
a charge.

8 GENERAL INSTRUCTIONS
The vehicle data is read out
using the legally prescribed
socket for on-board diagnosis
(OBD) in the vehicle.
Legal requirements for the
disclosure of data
As part of its legal responsib-
ilities, the manufacturer of the
vehicle is obligated to make its
stored data available to the rel-
evant authorities. This data is
provided in the required scope
in individual cases, for example
to clarify a criminal offence.
In the context of applicable
laws, public agencies are en-
titled in individual cases to read
out data from the vehicle them-
selves.
Operating data in the vehicle
Control units process data to
operate the vehicle.
This includes, for example:
Status reports of the vehicle
and its individual components,
for example wheel revolutions,
wheel speed, deceleration
Environmental conditions, for
example temperature
The data is only processed in
the vehicle itself and is gener-
ally non-permanent. The data is
not stored beyond the operat-
ing period.
Electronic components, for ex-
ample control units, contain
components for storing tech-
nical information. Information
can be temporarily or perman-
ently stored on the vehicle con-
dition, component loads, incid-
ents or errors.
This information is generally
used to document the condi-
tion of a component, a module,
a system or the surrounding
area, for example:
Operating conditions of sys-
tem components, for example
filling levels, tyre pressure
Malfunctions and faults in im-
portant system components,
for example light and brakes
Response of the vehicle in
special riding situations, for
example engagement of the
driving dynamics systems
Information on incidents
resulting in damage to the
vehicle
The data is necessary for the
provision of control unit func-
tions. Furthermore, the data
is used to detect and rectify
malfunctions and to enable the
vehicle manufacturer to optim-
ise vehicle functions.
The vast majority of this data
is non-permanent and is only
processed in the vehicle it-

9
self. Only a small amount of
the data is stored in incident or
fault memories as required by
events.
If services are accessed, for
example repairs, service pro-
cesses, warranty cases and
quality assurance measures,
this technical information can
be read out of the vehicle to-
gether with the vehicle identi-
fication number.
The information can be read
out by a BMW Motorrad
Retailer or another qualified
service partner or specialist
workshop. The legally stip-
ulated socket for on-board
diagnosis (OBD) in the vehicle
is used to read out the data.
The data is obtained, pro-
cessed and used by the
relevant parts of the retailer
network. The data is used
to document the technical
conditions of the vehicle, to
help with error localization,
to comply with warranty
obligations and to improve
quality.
In addition, the manufacturer
has various product monitor-
ing obligations arising from
product liability legislation. To
meet these obligations, the
vehicle manufacturer requires
technical data from the vehicle.
The data from the vehicle can
also be used to check warranty
claims from the customer.
Error and incident memories in
the vehicle can be reset during
servicing or repair work by a
BMW Motorrad Retailer or an-
other qualified service partner
or specialist workshop.
Data input and data transfer
in the vehicle
General
Depending on the equipment,
comfort and customised
settings can be stored in the
vehicle and can be changed or
reset at any time.
This includes, for example:
Settings of the windscreen
position
Chassis and suspension set-
tings
If required, data can be entered
in the entertainment and
communication system of the
vehicle, for example using a
smartphone.
Depending on the individual
equipment, this includes:
Multimedia data, such as mu-
sic for playback
Contacts data for use in con-
nection with a communication
system or an integrated navig-
ation system

10 GENERAL INSTRUCTIONS
Entered destinations
Data on the use of internet
services. This data can be
stored locally in the vehicle
or is located on a device that
is connected to the vehicle,
for example smartphone, USB
stick, MP3 player. If this data
is stored in the vehicle, the
data can be deleted at any
time.
This data is transferred to third
parties only if personally re-
quested within the context of
using online services. This de-
pends on the selected settings
when using the services.
Incorporation of mobile end
devices
Depending on the equipment,
mobile end devices connec-
ted to the vehicle, for example
smartphones, can be controlled
using the operating elements
of the vehicle.
The image and sound of the
mobile end device can then
be output via the multimedia
system. At the same time, spe-
cific information is transferred
to the mobile end device. De-
pending on the type of integra-
tion, this includes, for example,
position data and additional
general vehicle information.
This enables optimal use of the
selected apps, for example nav-
igation or music playback.
The type of additional data pro-
cessing is determined by the
provider of the respective app.
The scope of the possible set-
tings depends on the corres-
ponding app and the operat-
ing system of the mobile end
device.
Services
General
If the vehicle has a wireless
connection, this enables the
exchange of data between the
vehicle and other systems. The
wireless connection is enabled
by the vehicle's own transmit-
ter and receiver unit or us-
ing personally integrated mo-
bile end devices, for example
smartphones. Online functions
can be used using this wireless
connection. These include on-
line services and apps that are
provided by the vehicle manu-
facturer or by other providers.
Services of the vehicle manu-
facturer
For online services of the
vehicle manufacturer, the
individual functions are
described at suitable points,
for example rider's manual,
website of the manufacturer.
At the same time, information

11
is also provided on the
relevant data protection law.
Personal data may be used to
provide online services. Data
is exchanged using a secure
connection, for example with
the IT systems provided by the
vehicle manufacturer.
Obtaining, processing and us-
ing personal data outside of
the normal provision of ser-
vices requires legal permission,
contractual agreement or con-
sent. It is also possible to have
the entire data connection ac-
tivated or deactivated. Stat-
utory functions are excluded
from this.
Services from other providers
When using online services
from other providers, these
services are subject to the re-
sponsibility and the data pro-
tection and operating con-
ditions of the individual pro-
vider. The vehicle manufacturer
has no influence on the con-
tent that is exchanged in this
instance. Information on the
type, scope and purpose of the
data capture and use of per-
sonal data as part of the ser-
vices of third parties can be
ascertained from the individual
provider.
INTELLIGENT EMERGENCY
CALL SYSTEM
with intelligent emergency
callOE
Principle
The intelligent emergency call
system enables manual or auto-
matic emergency calls, for ex-
ample in the event of an acci-
dent.
The emergency calls are re-
ceived by an emergency call
centre that is commissioned by
the vehicle manufacturer.
For information on operating
the intelligent emergency call
system and its functions, please
refer to "Intelligent emergency
call".
Legal basis
Processing of personal data
using the intelligent emergency
call system is in line with the
following regulations:
Protection of personal data:
Directive 95/46/EC of the
European Parliament and of
the Council.
Protection of personal data:
Directive 2002/58/EC of the
European Parliament and of
the Council.
The legal basis for the activa-
tion and function of the intelli-

12 GENERAL INSTRUCTIONS
gent emergency call system is
the concluded ConnectedRide
contract for this function, as
well as the corresponding laws,
ordinances and directives of
the European Parliament and of
the European Council.
The relevant ordinances and
directives regulate the pro-
tection of natural persons dur-
ing the processing of personal
data.
The processing of personal
data by the intelligent emer-
gency call system satisfies the
European directives for the
protection of personal data.
The intelligent emergency call
system processes personal data
only with the agreement of the
vehicle owner.
The intelligent emergency call
system and other services with
additional benefits can process
personal data only with the ex-
press permission of the per-
son affected by the data pro-
cessing, for example the vehicle
owner.
SIM card
The intelligent emergency call
system operates via the mobile
phone network using the SIM
card installed in the vehicle.
The SIM card is permanently
logged into the mobile phone
network to enable rapid con-
nection setup. Data is sent to
the vehicle manufacturer in the
event of an emergency.
Improving quality
The data that is transferred in
an emergency is also used by
the manufacturer of the vehicle
to improve product and service
quality.
Location determination
The position of the vehicle can
be determined exclusively by
the mobile phone network
provider based on the mobile
phone site locations. It is not
possible for the provider to
trace a connection between
the vehicle's VIN and the phone
number of the installed SIM
card. Only the manufacturer of
the vehicle can link a VIN and
the phone number of the SIM
card installed in a particular
vehicle.
Log data of emergency calls
The log data of emergency
calls is stored in a memory of
the vehicle. The oldest log data
is regularly deleted. The log
data includes, for example, in-
formation on when and where
an emergency call was made.
In exceptional cases, the log
data can be read out of the

13
vehicle memory. As a rule, log
data is only read out following
a court order, and this is only
possible if the corresponding
devices are connected directly
to the vehicle.
Automatic emergency call
The system is designed so that,
following a sufficiently serious
accident, which is detected by
sensors in the vehicle, an emer-
gency call is automatically ac-
tivated.
Sent information
When making an emergency
call using the intelligent emer-
gency call system, the system
forwards the same information
to the designated emergency
call centre as is forwarded to
the public emergency opera-
tions centre by the statutory
emergency call system eCall.
In addition, the intelligent
emergency call system sends
the following additional
information to an emergency
call centre commissioned by
the vehicle manufacturer and,
if required, to the emergency
services:
Accident data, for example
the direction of impact detec-
ted by the vehicle sensors, to
assist the emergency services
response.
Contact details, for example
the phone number of the
installed SIM card and the
phone number of the rider,
if available, to enable rapid
contact with those involved in
the accident if required.
Data storage
The data for an activated
emergency call is stored in
the vehicle. The data contains
information on the emergency
call, for example the location
and time of the emergency call.
The voice recordings of the
emergency call are stored at
the emergency call centre.
The voice recordings of the
customer are stored for 24
hours in case details of the
emergency call need to be ana-
lysed. After this, the voice re-
cordings are deleted. The voice
recordings of the employee of
the emergency call centre are
stored for 24 hours for quality
assurance purposes.

14 GENERAL INSTRUCTIONS
Information on personal data
The data that is processed as
part of the intelligent emer-
gency call is processed exclus-
ively to carry out the emer-
gency call. As part of its stat-
utory obligation, the manufac-
turer of the vehicle provides
information about the data that
it has processed and any data
that it still has stored.