BMW X5 sDrive40i User manual

Service - air filter insert »»
Hot surfaces.Hot surfaces.
Risk of burning!Risk of burning!
Perform all work only on components that have cooled down.
Main WorksMain Works
Remove air filter insertRemove air filter insert
PreconditionPrecondition
Ignition is switched off.
Damage to the clean air line. Damage to the air filter.Damage to the clean air line. Damage to the air filter.
For changing the air filter insert, if the upper section of intake filterFor changing the air filter insert, if the upper section of intake filter
housing is only raised and not completely removed, the clean air linehousing is only raised and not completely removed, the clean air line
and the air filter insert may be damaged.and the air filter insert may be damaged.
Do not lift upper section of intake filter housing by force.
Unfasten clamp.
Remove upper section of intake filter housing completely.
BMW Group - AIR: 2022-08-08 / 12:45
Model: X5 sDrive40i
Development code: G05
Model code: CR43
Lead type: CR43
WARNINGWARNING
RISK OF DAMAGERISK OF DAMAGE

Installing the air filter insertInstalling the air filter insert
Unlock and loosen connector (1).
Unfasten clamp (2).
Remove screws (arrows).
Remove the upper section of the intake filter housing
(1).
Feed out air filter insert!(1) and remove.

Clean the lower section of the intake filter housing (1).
Install the air filter insert (1).
Oval-head screw
Insert and install the upper part of the intake filter
housing (1).
Tighten screws (arrows).
Tightening torquesTightening torques
Intake filter housing upper section toIntake filter housing upper section to
intake filter housing lower sectionintake filter housing lower section
Tightening torqueTightening torque
2.5Nm

cl.
Tighten clamp (2).
Tightening torquesTightening torques
Clean air pipe to upper section ofClean air pipe to upper section of
intake filter housingintake filter housing
Connect and lock the connector (1).
The connector!(1) must engage audibly.
Tightening torqueTightening torque
3Nm