BMW S1000RRKidsBike User manual

Instruction Manual
S 1000 RR KidsBike
BMW Motorrad
The Ultimate
Riding Machine

Introduction
The S 1000 RR KidsBike for
the BMW Motorrad riders of to-
morrow. Modelled on the sporty
design of the S 1000 RR BMW
Motorrad offers a high quality
walking bike for all those little ra-
cing drivers.
Never use KidsBike on
stairs, steep terrain or pub-
lic roads, never allow KidsBike to
be pulled by other vehicles.
Use KidsBike only under the su-
pervision of an adult.
Teach your child to use the
brake.
Your child must always wear a
helmet when using the bike.
If the KidsBike is cleaned
with unsuitable cleaning
agents, the surface may become
damaged.
Do not use cleaning agents that
contain alcohol, solvents or ab-
rasives.
Clean the surface with a moist
cloth only.
The KidsBike is suitable for
children from 3-6 years and
for a max. load of 30 kg.
Assembly and checking
of all screws, axles and
steering must only be done by
an adult.
Protect KidsBike against
any direct contact with
water.
Abbreviations and
symbols
Indicates warnings that you
must comply with for reas-
ons of your safety and the safety
of others, and to protect your
vehicle against damage.
Specific instructions on
how to operate, control, ad-
just or look after items of equip-
ment on the motorcycle.
Indicates the end of an
item of information.
Instruction.
Result of an activity.
Reference to a page with
more detailed informa-
tion.
Indicates the end of a
passage relating to spe-
cific accessories or items
of equipment.
Tightening torque.
Technical data.
z General instructions

Table of Contents
1 General views ............ 2
Scope of supply . . . . . . . . . . . . . . 2
2 Paddock Stand
assembly ................. 3
Paddock Stand assembly . . . . 3
3 S 1000 RR KidsBike as-
sembly.................... 4
Install the rear wheel . . . . . . . . . 4
Install front forks and handle-
bars .......................... 4
Installing front wheel . . . . . . . . . 5
Install wind deflector . . . . . . . . . 5
4 Operation................. 6
Adjusting seat height . . . . . . . . . 6
5 Technical data ........... 7
Technical data . . . . . . . . . . . . . . . 7

Scope of supply
1Frame with seat adjust-
ment
2Handlebars
3Fork
4Windscreen
5Front and rear wheel
6paddock stand
7Fastening elements
1
2
z General views

Paddock Stand
assembly
Place side sections 1on base
plate 2and attach using the
screws 3.
Slide in reinforcement 1
between side sections 2and
attach using screws 3.
2
3
z Paddock Stand assembly

Install the rear wheel
Fit bushes 1to rear wheel 2.
Mount rear wheel 1with
spacer sleeves 2in frame,
insert screw 3.
Install round nut 4and tighten.
Lift rear wheel 1and place on
paddock stand 2.
Install front forks and
handlebars
Insert front forks 1from be-
low into the mounting of the
frame arrow.
Position handlebars 1.
3
4
z S 1000 RR KidsBike assembly

Centrally insert screw 2and
tighten nut 3until hand-tight.
Install screws 1and tighten
until hand-tight.
Installing front wheel
Insert bushes 1in front
wheel 2.
Mount front wheel 1with
spacer sleeves 2in front forks
and fully insert screw 3.
Install round nut 4and tighten.
Install wind deflector
Position wind deflector 2and
install screws 1until hand-tight.
3
5
z S 1000 RR KidsBike assembly

Adjusting seat height
Adjusting seat height
The seat height can be ad-
justed in 3 levels. The low-
est level is set as standard.
Remove round nut 1and
screws 2.
Set seat adjustment 3to the
required position.
Install screws 2and round
nut 1again until hand-tight.
4
6
z Operation

Technical data
Age recommendation (years) 3 - 6
maximum load capacity max 30 kg
5
7
z Technical data