BOERPLAY PSTE000.002 User manual

PSTE000.002
4 person seesaw

Benaming
Title
Opmerking
Comment
Datum
Date
Tekening
Drawing
TOE PST 000 002 A
Wip, Gedempt
4-Persoons
19-1-2016
BOER
SPEELTOESTELLEN
Obstakelvrije zone Obstacle free zone
Obstakelvrije zone
Obstacle free zone
Opvangzone
Impact area
2,60 m
6,00m
R1,30m

Benaming
Title
Opmerking
Comment
Datum
Date
Tekening
Drawing
TOE PST 000 002 A
Wip, Gedempt
4-Persoons
19-1-2016
BOER
SPEELTOESTELLEN
Bodemplan Groundplan
1,00m
0,24 m
0,75m
3,00 m
1,30m

Benaming
Title
Opmerking
Comment
Datum
Date
Tekening
Drawing
TOE PST 000 002 A
Wip, Gedempt
4-Persoons
19-1-2016
BOER
SPEELTOESTELLEN
Afmetingen Dimensions
0,16m
1,02m
1,89 m
3,74 m
0,62m

Benaming
Title
Opmerking
Comment
Datum
Date
Tekening
Drawing
TOE PST 000 002 A
Wip, Gedempt
4-Persoons
19-1-2016
BOER
SPEELTOESTELLEN
Modules Modules
4-ZitsWip-wap 104006PSTMOD
12
Veerelement GedemptWip-wap
C101006PST
MOD
11
Opmerking
BenamingRevBew.
Volgnr
Progr.Type#
Nr
1
2

Benaming
Title
Opmerking
Comment
Datum
Date
Tekening
Drawing
TOE PST 000 002 A
Wip, Gedempt
4-Persoons
19-1-2016
BOER
SPEELTOESTELLEN
Montage Mounting
Geleverde delen:
A - wip met onderstel 3 8x1 0x1 5 m [160 kg]
Bevestiging sets:
1 - n.v.t.
Montagevolgorde:
1 - graaf de gaten volgens het bodemplan en plaats hierin het toestel
2 - controleer of het toestel voldoet aan de afmetingen zoals op blad 'afmetingen'
3 - dicht de gaten en verdicht het zand
Controles:
1 - correcte opbouw en alle bevestigingsmiddelen
2 - de uiterste hoogte van het uiteinde van de balk (<100 cm)
3 - controleer de afmetingen van de valbodem t.o.v. het toestel
Supplied parts:
A - see-saw with support 3 8x1 0x1 5 m [160 kg]
Mounting kits:
1 - n.a.
Assembly sequence:
1 - dig the holes according to the ground plan and place the play equipment
2 - check that the equipment conforms to the dimensions shown on sheet 'dimensions'
3 - close the holes and compact the sand
Checks:
1 - correct assembly and all the fasteners
2 - the maximum height of the end of the bar (<100 cm)
3 - check the dimensions of the safety area compared to the play equipment
A
Grondmarkering
Ground level marker

LOGBOOK
(Onderstaand logboek kan gebruikt worden om te voldoen aan de eisen, gesteld in artikel 14 van het Warenwetbesluit Attractie- en Speeltoestellen)
Type indication Adventure Play
Product code PSTE000.002
Name of equipment 4-Persoonswip. gedempt
Maximum height of fall 1,0 m
Year of construction 2017
Certificate 025855
inspection authority TUV Nederland QA BV
De Waal 21c, Best - 5684 PH Best
Name manufacturer BOERplay
Hyacintstraat 2 - 4255 HX Nieuwendijk
Phone: [phone]
Fax: [phone]
name installer
Description of equipment 4 person seesaw
Location of equipment
Data about the owner of the play equipment
Name:
Address:
Postcode and town:
Contact person:
Telephone number:
Data about the administrator of the play equipment
Name:
Address:
Postcode and town:
Contact person:
Telephone number:
PSTE000.002
4 person seesaw

LOGBOOK
Inspection and maintenance intervals
Nr.
Inspection Maintenance
months
between
inspections
1
Verify equipment's stability, junctions and missing parts.
Inspect bolts, screws and nuts for absence, jams, corrosion
and wear.
Add missing parts, secure joints, apply missing fixing
agent and replace corroded parts.
1
2
Chec suspension for wear. Replace worn parts and/or remove non-functioning
parts.
1
3
Inspect rotating parts such as hinges, rolling-element
bearings, etc. for wear and acceptability.
Replace worn parts and/or remove non-functioning
parts.
1
4
Chec wood for splinters, unacceptable damage and signs of
rot. Especially at ground level.
Repair damage. Replace affected wood. Smoothen
splintered wood and sharp edges.
1
5
Inspect foundation for stability, tearing and coverage. Restore foundation and covering material.
3
6
Examine rubber and synthetic parts for wear, damage and
brea . Replace original parts.
3
7
Inspect metal for corrosion and damage in the coating. Restore any damaged coating (after removing rust and
applying primer).
6
Chec ropes, cables, chains and nets for wear and damage.
Steel cables and nets which are tensioned must be chec ed
for tension.
Replace parts where necessary. Steel cables and nets
must be tensioned.
3
9
Inspect equipment for unsafe changes and additions. Remove unsafe additions and correct unsafe changes.
1
10
Inspect safety surfaces. Restore and repair where necessary.
1
Remarks
1. If used intensively, all points require extra attention.
2. Extreme weather conditions and locations may require a higher inspection frequency. Discuss this with
the supplier.
3. Vandalism-sensitive locations require stricter inspections, possibly daily.
4. Check the terrain regularly for items that do not belong there, are unsafe or may be used wrongly.
Examples are poisonous plants, glass shards, etc. Frequency depends on strain.
5. Remember that bad maintenance leads to unsafe conditions and notably faster impoverishment of the
playground area.
6. Replacement parts can be ordered at the manufacturer with the part numbers on the module drawing.
Drawings can be found in de user guide.
7. The impact area shall be provided with impact attenuating surface according to the specified falling
height.
. This list is conform the CEN-standard "playground equipment and surfacing NEN-EN 1176-7".

Benaming
Title
Opmerking
Comment
Datum
Date
Tekening
Drawing
MOD PST 006 101 C
Wip-wap
Veerelement, Gedempt
19-1-2016
BOER
SPEELTOESTELLEN
Samenstelling module Assembly module
Opmerking
BenamingRev.Bew.
Volgnr
Progr.Type#
Nr
M12 - RVS A2-70
Borgdopmoer
025012011BSR1
M12 x 30 - RVS A2-70
Cilinderkop bout
030012027BSR2
M16 x 35 - RVS A2-70
Cilinderkop bout
035016027BSR43
M12 - RVS A2-70Sluitring 003012030BSR
4
M16 - RVS A2-70
Sluitring
003016030BSR
45
M12 x 230 - RVS A2-70
Draadeind
230012070BSR46
M12 x 23
Conische veerring
005012037BSV7
DR-A 50 x 200 - VZ .
Torsie element Rosta
0502000 0BSV1
ROSTA BR50KLEMBEUGEL 0002500 0BSV29
ADELAAR
OPVULSCHIJFJE
HPE
001SOLKST210
Lengte =1300Paal 1 -20 013200PSTOHO2
11
Lengte = 1000Plank 120x20 100212PSTOHO
4
12
WipdemperBeugel
B
905001PSTOME213
11
2
7
3
5
9
13
10
8
Grondmarkering
Ground level marker
0,75m0,55m
5) aandraaien met momentsleutel, 93N
m
assemble with torque wrench, 93Nm
0,43m
1
46

B
BB
Be
ee
en
nn
na
aa
am
mm
mi
ii
in
nn
ng
gg
g
Title
O
OO
Op
pp
pm
mm
me
ee
er
rr
rk
kk
ki
ii
in
nn
ng
gg
g
Comment
D
DD
Da
aa
at
tt
tu
uu
um
mm
m
Date
T
TT
Te
ee
ek
kk
ke
ee
en
nn
ni
ii
in
nn
ng
gg
g
Drawing
MOD PST 006 104
Wip-wap
4-Zits
7-3-2011
BOER
S
SS
SP
PP
PE
EE
EE
EE
EL
LL
LT
TT
TO
OO
OE
EE
ES
SS
ST
TT
TE
EE
EL
LL
LL
LL
LE
EE
EN
NN
N
Samenstelling module Assembly module
Opmerking
BenamingRev.Bew.
Volgnr
Progr.Type#Nr
5 x 30 - RVS A2-70
Schroef Assy
030005002BSR241
M1 - RVS A2-70Dopmoer 03001012BSR42
M1 - RVS A2-70
Sluitring
00301030BSR43
M10 X 80HOUTDRAADBOUT 080010022BSV44
M10 - VZ 8.8
Sluitring
002010030BSV
45
4 Persoons - L=3800
Paal Ø14-Ø1
00111PSTOHO1
Wip balk
Steun A372003PSTSME17
R & THandgreep 320053PSTSME
4
8
3800
342
2
3
5
4
1
6
500 1100 225
8
7