Percussion Play Surface Fixed Rainbow Trio Chimes Pentatonic 6... User manual

Surface Fixed
1. Carefully lay 2 x legs on a
level surface and check
distance between legs is
equal. Line up pre drilled
holes in the backboards with
the holes in legs and ensure
the instrument is aligned
square with the legs. Fix in
place using M8x40mm
screws supplied (see
installation guide)
Installation Instructions
6. Beaters can be fixed to
Steel posts with fixings
provided
1260mm
Ground Surface
16 Kg
BS EN 1176
1.5m
Weight of heaviest part 8.35kg (Freechimes)
1.5m
Install Instrument
with 1.5m free space
(from widest point)
around it.
Metric Conversion:
1260mm/ 49 39/64”
1.5m/ 59”
2. Attach Surface Fixing posts
to legs (See Surface Fix Post
Installation Sheet)
4.Fix Surface Plate to level
surface using Coachscrews,
Rawlbolts, chemical anchors
or similar as deemed
appropriate by Installer.
(It is your responsibility to
ensure that the existing
surface is suitable to
receive the appropriate
fixing)
3.Locate Instrument in
desired location and mark
holes to fix to desired surface.
5. Make sure all fixings are
covered and secure using
cover caps provided
Rainbow Trio Chimes
Pentatonic 6 Notes
Page 1 of 3
Pair Small
Beaters X1 16 Kg
Surface Fix
Components: M10x70 Security Screw
x2
M10 Barrel Nut
x2
2 Part Cover Cap
x8 Spares available from
percussionplay.com or from your
local distributor
M6x20mm
Secure Screw
X4
M6 Saddle Straps
X2
M8x40mm
Secure Screw
X4
Components:

COMPONENTS LIST:
Saddle Strap X2
M10x50 Pin torx X4
M6x20 Pin torx X4
M10x70 Pin torx X2
M10 Barrel Nut Pin torx X2
Surface Fixed
Assembly Guide PPFREC
BS EN 1176
TX 30 Driver Bit
x1
TX 45 Driver Bit
x2
Tools:
Thread Lock Solution
Required (Not Supplied)
Thread Lock Solution
Required (Not Supplied)
M8 X 40 Pin Torx X4
472mm Pentatonic 6 Note Post Centres
Rainbow Trio Chimes
Pentatonic 6 Notes
Page 2 of 3
Pair Small
Beaters X1 16 Kg
Surface Fix
Components: M10x70 Security Screw
x2
M10 Barrel Nut
x2
2 Part Cover Cap
x8 Spares available from
percussionplay.com or from your
local distributor
M6x20mm
Secure Screw
X4
M6 Saddle Straps
X2
M8x40mm
Secure Screw
X4
Components:

Surface Fixed
Surface Fix Post Installation
M10 Barrel Nut
x2
M10x70 Security Screw
x2
Components: Ground fix tube
protrudes 300mm
from ground surface
that inserts into the
base of the chime post
TX 45 Driver Bit
Tools:
x2
BS EN 1176
Thread Lock Solution
Required (Not Supplied)
Locate the Surface fix
Plate into the leg of the
instrument.
Fix instrument to Surface
fix plate using M10 bolt
and Barrel Nut and use
thread locking solution
to prevent fixings working
loose.
Fix Surface Plate to the
ground surface Ground
Anchors Not provided
cover fixings with caps
provided
12 3
Thread Lock Solution
Required (Not Supplied)
2 Part Cover Cap
x8
Rainbow Trio Chimes
Pentatonic 6 Notes
Page 2 of 3