BOERPLAY PSTE105.016 User manual

PSTE105.016
Hill climber

Benaming
Title
Opmerking
Comment
Datum
Date
Tekening
Drawing
TOE PST 105 016 C
Oploopstam 1,1m
Adventure Play
24-11-2015
BOER
SPEELTOESTELLEN
Obstakelvrije zone Obstacle free zone
Obstakelvrije zone
Obstacle free zone
Opvangzone
Impact area
5,62 m
3,80 m
R1,50m

Benaming
Title
Opmerking
Comment
Datum
Date
Tekening
Drawing
TOE PST 105 016 C
Oploopstam 1,1m
Adventure Play
24-11-2015
BOER
SPEELTOESTELLEN
Bodemplan Groundplan
0,90 m
1,50 m
0,39 m
1,99 m 1,89 m
1,90 m
2,59 m
1,73 m
2,34 m
0,34 m
0,80 m
Grondmarkering
Ground level marker
Grondmarkering
Ground level marker
1,08 m
0,33 m

Benaming
Title
Opmerking
Comment
Datum
Date
Tekening
Drawing
TOE PST 105 016 C
Oploopstam 1,1m
Adventure Play
24-11-2015
BOER
SPEELTOESTELLEN
Afmetingen Dimensions
0,39 m
1,94 m
1,00 m
1,14 m
2,10 m
0,70 m
0,81 m
1,10 m
0,51 m
1,94 m

Benaming
Title
Opmerking
Comment
Datum
Date
Tekening
Drawing
TOE PST 105 016 C
Oploopstam 1,1m
Adventure Play
24-11-2015
BOER
SPEELTOESTELLEN
Modules Modules
Opmerking
BenamingRev.Bew.
Volgnr
Progr.Type#Nr
Adventure PlayBoomtrap 1,0m enkelC003026PSMOD
11
tbv PS .105.016Losse Onderdelen
C016105PSMOD12
2
1
6 zakken beton toevoegen
6 zakken beton toevoegen

Benaming
Title
Opmerking
Comment
Datum
Date
Tekening
Drawing
TOE PST 105 016 C
Oploopstam 1,1m
Adventure Play
24-11-2015
BOER
SPEELTOESTELLEN
Montage Mounting
Geleverde delen:
A - Paal 1,60 m onder
B - Paal 1,60 m boven
- Boomtrap lengte 3000
D - Hercules touw
Bevestiging sets:
1 - RVS M12 bevestigingssets voor de palen
2 - Verzinkte veiligheidsschroef, M6
Montagevolgorde:
1 - Graaf de gaten volgens het bodemplan en plaats A en B
2 - Plaats en bevestig deze aan A,B
3 - Plaats D en bevestig deze aan A,B
4 - ontroleer of het toestel voldoet aan de afmetingen zoals op blad 'afmetingen'
5 - Dicht de gaten en verdicht het zand
ontroles:
1 - orrecte opbouw en alle bevestigingsmiddelen
2 - ontroleer de afmetingen van de valbodem t.o.v. het toestel
3 - ontroleer of de hellingshoek niet groter is dan 38 graden
Supplied parts:
A - Post length 1600 below
B - Post length 1600 above
B - Tree stairs length 3000
- Hercules rope
Mounting kits:
1 - Stainless steel M12 fastener sets for the posts
2 - Galvanized steel M6 safety screw
Assembly sequence:
1 - Dig the holes according to the ground plan and place A and B
2 - Place and attach it to A,B
3 - Place D and attach it to A,B
4 - heck that the equipment conforms to the dimensions shown on sheet 'dimensions'
5 - lose the holes and compact the sand
hecks:
1 - orrect assembly and all the fasteners
2 - heck the dimensions of the safety area compared to the play equipment
3 - heck that the slope does not exceed 38 degrees
B
A
D
C

LOGBOOK
(Onderstaand logboek kan gebruikt worden om te voldoen aan de eisen, gesteld in artikel 14 van het Warenwetbesluit Attractie- en Speeltoestellen)
Type indication Adventure Play
Product code PSTE105.016
Name of equipment Hellingklimmer
Maximum height of fall 0,2 m
Year of construction 2017
Certificate 032650
inspection authority TUV Nederland QA BV
De Waal 21c, Best - 5684 PH Best
Name manufacturer BOERplay
Hyacintstraat 2 - 4255 HX Nieuwendijk
Phone: [phone]
Fax: [phone]
name installer
Description of equipment Hill climber
Location of equipment
Data about the owner of the play equipment
Name:
Address:
Postcode and town:
Contact person:
Telephone number:
Data about the administrator of the play equipment
Name:
Address:
Postcode and town:
Contact person:
Telephone number:
PSTE105.016
Hill climber

LOGBOOK
Inspection and maintenance intervals
Nr.
Inspection Maintenance
months
between
inspections
1
Verify equipment's stability, junctions and missing parts.
Inspect bolts, screws and nuts for absence, jams, corrosion
and wear.
Add missing parts, secure joints, apply missing fixing
agent and replace corroded parts.
1
2
Chec suspension for wear. Replace worn parts and/or remove non-functioning
parts.
1
3
Inspect rotating parts such as hinges, rolling-element
bearings, etc. for wear and acceptability.
Replace worn parts and/or remove non-functioning
parts.
1
4
Chec wood for splinters, unacceptable damage and signs of
rot. Especially at ground level.
Repair damage. Replace affected wood. Smoothen
splintered wood and sharp edges.
1
5
Inspect foundation for stability, tearing and coverage. Restore foundation and covering material.
3
6
Examine rubber and synthetic parts for wear, damage and
brea . Replace original parts.
3
7
Inspect metal for corrosion and damage in the coating. Restore any damaged coating (after removing rust and
applying primer).
6
Chec ropes, cables, chains and nets for wear and damage.
Steel cables and nets which are tensioned must be chec ed
for tension.
Replace parts where necessary. Steel cables and nets
must be tensioned.
3
9
Inspect equipment for unsafe changes and additions. Remove unsafe additions and correct unsafe changes.
1
10
Inspect safety surfaces. Restore and repair where necessary.
1
Remarks
1. If used intensively, all points require extra attention.
2. Extreme weather conditions and locations may require a higher inspection frequency. Discuss this with
the supplier.
3. Vandalism-sensitive locations require stricter inspections, possibly daily.
4. Check the terrain regularly for items that do not belong there, are unsafe or may be used wrongly.
Examples are poisonous plants, glass shards, etc. Frequency depends on strain.
5. Remember that bad maintenance leads to unsafe conditions and notably faster impoverishment of the
playground area.
6. Replacement parts can be ordered at the manufacturer with the part numbers on the module drawing.
Drawings can be found in de user guide.
7. The impact area shall be provided with impact attenuating surface according to the specified falling
height.
. This list is conform the CEN-standard "playground equipment and surfacing NEN-EN 1176-7".

A ( 1 : 10 )
Benaming
Title
Opmerking
Comment
Datum
Date
Tekening
Drawing
MOD PST 026 003 C
Boomtrap 1,0m enkel
Adventure Play
3-6-2015
BOER
SPEELTOESTELLEN
Samenstelling module Assembly module
Opmerking
BenamingRev.Bew.
Volgnr
Progr.Type#Nr
M12, L= 160, RV A2-70lotbout+dopm.+ringen 160M12ET
BMR
2
1
5 x 70 - RV A2-70
chroef Assy
070005002B R22
ø10 X 100 - RV A2-70
Houtdraadbout
100010022B R23
Pin-Torx - VZ 8.8
Veiligheidsschroef
030006025B V24
Lengte =600
Paal 6
006080P TOHO25
Lengte =2000
Paal 14-16
020160P TOHO
1
6
Lengte =3000
Paal 16-18
030180P TOHO1
7
Lengte = 600tandaard plank 120x20 060211P TOHO
1
8
touw d16
Bus RV schroefdraad
RV002BUOME29
16mm diameter
Touw 2,3m 011016P TONT110
A
34°
0,00 m
1,38 m
1,78 m
2,41 m
2,14 m
230cm
106
251
165
7 treden uitkappen volgens
bovenstaande maten
2,59 m
947
6
10
0,24m
71
Gaten t.b.v. bevestiging paal 6-8 in werk boren,
zodat trapboom toepasbaar is op willekeurig talud.