BOERPLAY PSTE110.001 User manual

PSTE110.001
Sandplay equipment

Benaming
Title
Opmerking
Comment
Datum
Date
Tekening
Drawing
TOE PST 110 001
Zandspeeltoestel
Adventure Play
11-10-2011
BOER
SPEELTOESTELLEN
Obstakelvrije zone Obstacle free zone
Obstakelvrije zone
Obstacle free zone
Opvangzone
Impact area
5,5m
5,4 m
R1750

Benaming
Title
Opmerking
Comment
Datum
Date
Tekening
Drawing
TOE PST 110 001
Zandspeeltoestel
Adventure Play
11-10-2011
BOER
SPEELTOESTELLEN
Bodemplan Groundplan
0,60 m 0,69 m
Grondmarkering
Ground level marker
2,37 m 0,34 m 0,35 m 0,64 m 1,71 m
1,49m
1,54m
0,24m
2,22m
0,70m
0,25 m
0,38m
o
2,08 m
1,03m

Benaming
Title
Opmerking
Comment
Datum
Date
Tekening
Drawing
TOE PST 110 001
Zandspeeltoestel
Adventure Play
11-10-2011
BOER
SPEELTOESTELLEN
Afmetingen Dimensions
0,00 m
0,26 m
0,50 m
1,00 m
1,50 m
2,35 m
2,96 m
3,54 m
0,00 m
0,59 m
1,31 m
1,70 m
2,09 m
2,70 m
0,00m 0,61m 0,90m 1,55m 1,91m 2,51m 2,94m

Benaming
Title
Opmerking
Comment
Datum
Date
Tekening
Drawing
TOE PST 110 001
Zandspeeltoestel
Adventure Play
11-10-2011
BOER
SPEELTOESTELLEN
Modules Modules
Opmerking
BenamingRev.Bew.
Volgnr
Progr.Type#
Nr
Adventure PlayLadder 1,0 m
B001028PSTMOD11
Adventure PlayToon ank / zit ank
A001029PSTMOD32
Adventure PlayKlimtoren 0,5 - 1,0 - 1,5
016030PSTMOD13
Adventure PlayWandje 1,2
001031PSTMOD
14
Adventure PlayWandje 1,2 opening 0,5
003031PSTMOD2
5
Bak en KatrolZandschep
A
001032PSTMOD
1
6
Adventure PlayZandrad 001033PSTMOD
17
t v PST.110.001Losse Onderdelen
001110PSTMOD18
3
7
2
2
8
2
1
5
6

Benaming
Title
Opmerking
Comment
Datum
Date
Tekening
Drawing
TOE PST 110 001
Zandspeeltoestel
Adventure Play
11-10-2011
BOER
SPEELTOESTELLEN
Montage Mounting
Geleverde delen:
A - Toren
B - Ladder
C - Zandrad
D - Dak met zandtakel
Bevestiging sets:
1 - RVS M10 bevestigingsset voor de ladder
2 - RVS M10 bevestigingsset voor het dak
Montagevolgorde:
1 - Graaf de gaten volgens het bodemplan en plaats hierin A
2 - Plaats B, bevestig B met 1 aan A
3 - Plaats C, bevestig C aan A
- Plaats D, bevestig D met 2 aan A
5 - Controleer of het toestel voldoet aan de afmetingen zoals op blad 'afmetingen'
6 - Dicht de gaten en verdicht het zand
Controles:
1 - Correcte opbouw en alle bevestigingsmiddelen
2 - De uiterste hoogte van het platform (1, 5m)
3 - Controleer de afmetingen van de valbodem t.o.v. het toestel
Supplied parts:
A - Tower
B - Ladder
C - Sand wheel
D - Roof with sand bucket
Mounting kits:
1 - Stainless steel M10 fastener set for the ladder
2 - Stainless steel M10 fastener set for the roof
Assembly sequence:
1 - Dig the holes according to the ground plan and place A
2 - Place B, attach B to A with 1
3 - Place C, attach C to A
- Place D, attach D to A with 2
5 - Check that the equipment conforms to the dimensions shown on sheet 'dimensions'
6 - Close the holes and compact the sand
Checks:
1 - Correct assembly and all the fasteners
2 - The maximum height of the platform (1, 5 m)
3 - Check the dimensions of the safety area with regard to to the play equipment
D
A
B
C

LOGBOOK
(Onderstaand logboek kan gebruikt worden om te voldoen aan de eisen, gesteld in artikel 14 van het Warenwetbesluit Attractie- en Speeltoestellen)
Type indication Adventure Play
Product code PSTE110.001
Name of equipment Zandspeeltoestel
Maximum height of fall 1,5 m
Year of construction 2017
inspection authority
-
Name manufacturer BOERplay
Hyacintstraat 2 - 4255 HX Nieuwendijk
Phone: [phone]
Fax: [phone]
name installer
Description of equipment Sandplay equipment
Location of equipment
Data about the owner of the play equipment
Name:
Address:
Postcode and town:
Contact person:
Telephone number:
Data about the administrator of the play equipment
Name:
Address:
Postcode and town:
Contact person:
Telephone number:
PSTE110.001
Sandplay equipment

LOGBOOK
Inspection and maintenance intervals
Nr.
Inspection Maintenance
months
between
inspections
1
Verify equipment's stability, junctions and missing parts.
Inspect bolts, screws and nuts for absence, jams, corrosion
and wear.
Add missing parts, secure joints, apply missing fixing
agent and replace corroded parts.
1
2
Chec suspension for wear. Replace worn parts and/or remove non-functioning
parts.
1
3
Inspect rotating parts such as hinges, rolling-element
bearings, etc. for wear and acceptability.
Replace worn parts and/or remove non-functioning
parts.
1
4
Chec wood for splinters, unacceptable damage and signs of
rot. Especially at ground level.
Repair damage. Replace affected wood. Smoothen
splintered wood and sharp edges.
1
5
Inspect foundation for stability, tearing and coverage. Restore foundation and covering material.
3
6
Examine rubber and synthetic parts for wear, damage and
brea . Replace original parts.
3
7
Inspect metal for corrosion and damage in the coating. Restore any damaged coating (after removing rust and
applying primer).
6
Chec ropes, cables, chains and nets for wear and damage.
Steel cables and nets which are tensioned must be chec ed
for tension.
Replace parts where necessary. Steel cables and nets
must be tensioned.
3
9
Inspect equipment for unsafe changes and additions. Remove unsafe additions and correct unsafe changes.
1
10
Inspect safety surfaces. Restore and repair where necessary.
1
Remarks
1. If used intensively, all points require extra attention.
2. Extreme weather conditions and locations may require a higher inspection frequency. Discuss this with
the supplier.
3. Vandalism-sensitive locations require stricter inspections, possibly daily.
4. Check the terrain regularly for items that do not belong there, are unsafe or may be used wrongly.
Examples are poisonous plants, glass shards, etc. Frequency depends on strain.
5. Remember that bad maintenance leads to unsafe conditions and notably faster impoverishment of the
playground area.
6. Replacement parts can be ordered at the manufacturer with the part numbers on the module drawing.
Drawings can be found in de user guide.
7. The impact area shall be provided with impact attenuating surface according to the specified falling
height.
. This list is conform the CEN-standard "playground equipment and surfacing NEN-EN 1176-7".

Benaming
Title
Opmerking
Comment
Datum
Date
Tekening
Drawing
MOD PST 028 001 B
Ladder 1,0 m
Adventure Play
3-4-2013
BOER
SPEELTOESTELLEN
Samenstelling module Assembly module
Opmerking
BenamingRev.Bew.
Volgnr.
Progr.Type#
Nr.
M12, L= 180, RVS A2-70
Slotbout dopm. ringen
180M12SET
BMR
8
1
5 x 70 - RVS A2-70
Schroef Assy
070005002BSR62
Lengte =700Paal 6 007080PSTOHO33
Lengte =2300Paal 10-12 023120PSTOHO2
4
Lengte = 1000
Standaard plank 120x20
100211PSTOHO1
5
2,30 m
0,81 m
0,54 m
Grondmarkering
Ground level marker
0,60 m
Tussenruimtes overal >230 mm
Openings always >230 mm
3
3
4
0,42 m>
3
0,41 m 0,30 m 0,30 m

B
BB
Be
ee
en
nn
na
aa
am
mm
mi
ii
in
nn
ng
gg
g
Title
O
OO
Op
pp
pm
mm
me
ee
er
rr
rk
kk
ki
ii
in
nn
ng
gg
g
Comment
D
DD
Da
aa
at
tt
tu
uu
um
mm
m
Date
T
TT
Te
ee
ek
kk
ke
ee
en
nn
ni
ii
in
nn
ng
gg
g
Drawing
MOD PST 029 001 A
Toonbank / zitbank
Adventure Play
14-7-2014
BOER
S
SS
SP
PP
PE
EE
EE
EE
EL
LL
LT
TT
TO
OO
OE
EE
ES
SS
ST
TT
TE
EE
EL
LL
LL
LL
LE
EE
EN
NN
N
Samenstelling module Assembly module
Opmerking
BenamingRev.Bew.
Volgnr
Progr.Type#
Nr
M12, L= 320, VS A2-70
Draadeind+dopm.+ringen
320M12SETBM21
1200 mm Lengte
70 mm Vierkante paal
120307PSTOHO22
Adventure PlayZitvlak 001069PSTSHO
1
3
0,63 m
0,90m
1,20m
0,18 m
3
1
2