BOERPLAY Springer Goldfish User manual

Springer Goldfish
BBIE709
Powered by TCPDF (www.tcpdf.org) 1 / 1

© Copyright BOERplay 12-1-2022 Revision: BBI 709
Installation instructions
Installatie-instructies
Installationsanleitung
Instrucciones de instalación
Instructions d'installation
NL
DE
ES
FR
- main dimensions
Hoofdafmetingen
Hauptabmessungen
Dimensiones principales
Dimensions principales
NL
DE
ES
FR
Obstakelvrije zone
Hindernissfreie raum
Zona libre de obstáculos
Zone libre d’obstacles
NL
DE
ES
FR
- obstacle free zone
- ground plan
NL
DE
ES
FR
Bodemplan
Bodenplan
Plan de superficie
Plan de surface
Important!
If the soil does not aid in the stability of the equipment being
placed, please pour 50L of concrete per post.
NL - Belangrijk!
Als de bodemgesteldheid niet bijdraagt aan de stabiliteit van
het toestel, dient er 50L beton per staander te worden
toegevoegd.
DE - Achtung!
Wenn der Boden die Stabilität des zu platzierenden Geräts
nicht unterstützt, gießen Sie bitte 50L Beton pro Pfosten ein.
ES - Importante!
Si el tierra no ayuda a la estabilidad del equipo que se está
colocando, vierta 50L de hormigón por poste.
FR - Important !
Si le sol ne contribue pas à la stabilité de l’équipement à
placer, versez 50L de béton par poteau.
!
x
✔✔
> 0,4 m

© Copyright BOERplay 12-1-2022 Revision: BBI 709
main dimensions
Hoofdafmetingen
Hauptabmessungen
Dimensiones principales
Dimensions principales
NL
DE
ES
FR
0,00 m
0,45 m
0,79 m
0,42 m
0,65 m

© Copyright BOERplay 12-1-2022 Revision: BBI 709
obstacle free zone
Obstakelvrije zone
Hindernissfreie raum
Zona libre de obstáculos
Zone libre d’obstacles
NL
DE
ES
FR
Impact area
NL
DE
ES
FR
Obstacle free zone
NL
DE
ES
FR
i
Opvangzone
Ausprallbereich
Zona de impacto
Zone d‘impact
Obstakelvrije zone
Hindernissfreie raum
Zona libre de obstáculos
Zone libre d’obstacles
1,04 m
1,47 m
2,50 m
3,50 m

© Copyright BOERplay 12-1-2022 Revision: BBI 709
ground plan
Bodemplan
Bodenplan
Plan de superficie
Plan de surface
NL
DE
ES
FR
Maaiveld
Bodennahe
Nivel del suelo
Niveau au sol
Ground level
NL
DE
ES
FR
i
0,50 m
0,48m
0,48m
1,75 m 1,75 m
1,25 m 1,25 m

© Copyright BOERplay 12-1-2022 Revision: BBI 709
Assembly manual
Montagehandleiding
Montageanleitungen
Manual de montaje
Manuel de montage
NL
DE
ES
FR
- required tools
Benodigde gereedschappen
Benötigtes Werkzeug
Herramientas requeridas
Outils nécessaires
NL
DE
ES
FR
Montagevolgorde
Montagereihenfolge
Orden de esemblado
Ordre de montage
NL
DE
ES
FR
- order of assembly
- assembly manual - module
NL
DE
ES
FR
Montagehandleiding - module
Montageanleitung - Modul
Manual de ensamblado - módulo
Manuel de montage - module
MOD.BBI.701
x
1
MOD.BBI.711
x
1
MOD.BBI.711
MOD.BBI.701

© Copyright BOERplay 12-1-2022 Revision: BBI 709
required tools
Benodigde gereedschappen
Benötigtes Werkzeug
Herramientas requeridas
Outils nécessaires
NL
DE
ES
FR
TX-25
TX-40
TX-25
No. 10 (2x)
No. 13 (2x)
No. 17 (2x)
No. 10
No. 13
No. 17
Ø3 mm
Ø5 mm
Ø11 mm
Ø12 mm
5
6

© Copyright BOERplay 12-1-2022 Revision: BBI 709
order of assembly
Montagevolgorde
Montagereihenfolge
Orden de esemblado
Ordre de montage
NL
DE
ES
FR
assembly manual
module
assembly manual
module
1/2
2/2
MOD.BBI.711
MOD.BBI.701
BOER
PLAY
xxx.xxx.xxx
EN 1176
www.boerplay.com

LOGBOOK
Type indication Figura Play
Article number BBIE709
Product Name Springer Goldfish
Maximum fall height > 0,6 m
Construction year 2023
Certificate 066752
Inspection body TUV Nederland QA BV
Ekkersrijt 4401
5692 DL Son
Manufacturer name Boer Speeltoestellen
Hyacintstraat 2 - 4255 HX Nieuwendijk
Phone: [phone]
Fax: [phone]
Installer name _______________________________________________________
_______________________________________________________
_______________________________________________________
Playground location _______________________________________________________
Information about the owner of the playground
Name: _______________________________________________________
Address: _______________________________________________________
Zipcode and city: _______________________________________________________
Contact: _______________________________________________________
Phone number: _______________________________________________________
Information about the manager of the playground
Name: _______________________________________________________
Address: _______________________________________________________
Zipcode and city: _______________________________________________________
Contact: _______________________________________________________
Phone number: _______________________________________________________
Powered by TCPDF (www.tcpdf.org)

LOGBOOK
Inspection and maintenance
Date of
inspection
maintenance
Time of
inspection
maintenance
Name
executor of
inspection
Name
executor of
maintenance
Found defects Parts to be
replaced
Accidents
Date
accident
Age of
victim Probable cause of injury Occurred injury Measures taken after accident

Inspection and maintenance intervals
Nr Inspection Maintenance
months
between
inspections
1
Verify equipment's stability, junctions and
missing parts Inspect bolts, screws and nuts for
absence, jams, corrosion and wear
Add missing parts, secure joints, apply
missing fixing agent and replace
corroded parts
1
2
Check suspension for wear Replace worn parts and/or remove non-
functioning parts
1
3
Inspect rotating parts such as hinges, rolling-
element bearings, etc for wear and acceptability
Replace worn parts and/or remove non-
functioning parts
1
4
Check wood for splinters, unacceptable damage
and signs of rot, especially at ground level
Repair damage Replace affected wood
Smoothen splintered wood and sharp
edges
1
5
Inspect foundation for stability, tearing and
coverage
Restore foundation and covering
material
3
6
Examine rubber and synthetic parts for wear,
damage and breakage Replace for OEM original parts
3
7
Examine fibre reinforced plastic parts, especially
slides, for wear
Replace for OEM parts if the fibres are
visible
6
8
Inspect metal for corrosion and damage in the
coating
Restore any damaged coating (after
removing rust and applying primer)
6
9
Check ropes, cables, chains and nets for wear
and damage Steel cables and nets which are
tensioned must be checked for tension
Replace parts where necessary Steel
cables and nets must be tensioned
3
10
Inspect equipment for unsafe changes and
additions
Remove unsafe additions and correct
unsafe changes
1
11
Inspect safety surfaces Restore and repair where necessary
1
Remarks
1 If used intensively, all points require extra attention
2 Extreme weather conditions and locations may require a higher inspection frequency Discuss this with the
supplier
3 Vandalism-sensitive locations require stricter inspections, possibly daily
4 Re-tighten all connections in Robinia equipment two months after first use
5 Re-span spatial networks two months after first use
6 Check the terrain regularly for items that do not belong there, are unsafe or may be used wrongly Examples
are poisonous plants, glass shards, etc Frequency depends on strain

7 Remember that bad maintenance leads to unsafe conditions and notably faster impoverishment of the
playground area
8 Replacement parts can be ordered at the manufacturer with the OEM part numbers on the module drawing
Drawings can be found in the user guide
9 The impact area shall be provided with impact attenuating surface according to the specified falling height
•Up to 0,6m height of fall: no requirements regarding impact attenuation
•Turf, topsoil: suitable up to 1000mm height of fall
•Loose fill (sand, gravel, bark, woodchips): up to 3000mm height of fall Layer thickness is height
of fall / 10 +100mm, with a minimum of 300mm
•Synthetic surfaces (Rubber tiles, artificial turf, wetpour, tigermulch etc ): height of fall and layer
thickness according to the information of the supplier
10 This list is conform the CEN-standard "playground equipment and surfacing NEN-EN 1176-7"
Improving the
foundations
(for equipment without concrete in the standard
foundation)
If the impact area is loose fill (sand, gravel, bark,
woodchip, etc ), or if the soil itself does not add to
stability of the equipment (i e sand, pumice, peat soil)
pour 50l of concrete per post
For instance:
Square: 0,6 x 0,6 x 0,16m
Round: ø0,35 x 0,5m
Round: ø0,50 x 0,2m

© Copyright BOERplay 12-1-2022 Revision: MOD BBI 701
assembly manual - module
Montagehandleiding - module
Montageanleitung - Modul
Manual de ensamblado - módulo
Manuel de montage - module
NL
DE
ES
FR

© Copyright BOERplay 12-1-2022 Revision: MOD BBI 701
BSV.010.010.010
x
3
BSV.026.010.035
x
3
BSV.030.010.002
x
3
OME.PST.023.905
x
1
SMD.VER.200.905
x
1
SME.MNP.149.372
x
1
1/1
OME.PST.023.905
SMD.VER.200.905
BSV.026.010.035
BSV.030.010.002
BSV.010.010.010
SME.MNP.149.372

© Copyright BOERplay 30-6-2021 Revision: MOD BBI 711
assembly manual - module
Montagehandleiding - module
Montageanleitung - Modul
Manual de ensamblado - módulo
Manuel de montage - module
NL
DE
ES
FR

© Copyright BOERplay 30-6-2021 Revision: MOD BBI 711
BSR.010.008.008
x
8
BSR.052.008.060
x
8
OME.BBI.021
x
8
OPE.BBI.567.052
x
1
OPE.BBI.568.052
x
1
OPE.BBI.633.022
x
1
OPE.BBI.634.022
x
1
x
✔
Detail A (8x)
BSR.052.008.060
OME.BBI.021
BSR.010.008.008
1/3
A
A
OPE.BBI.568.052
OPE.BBI.567.052
OPE.BBI.634.022
OPE.BBI.633.022

© Copyright BOERplay 30-6-2021 Revision: MOD BBI 711
BSV.017.010.008
x
4
BSV.030.010.002
x
4
BSV.034.010.002
x
4
BSV.060.010.365
x
1
BSV.060.010.400
x
1
KST.DON.010.020
x
2
KST.DON.010.060
x
2
KST.DON.011.020
x
4
KST.DOP.010.020
x
2
KST.DOP.010.060
x
2
OME.MNP.231.502
x
2
OPE.BBI.572.006
x
2
2/3
Detail B (1x)
Detail C (1x)
OPE.BBI.572.006
KST.DON.010.060
BSV.030.010.002
BSV.034.010.002
BSV.017.010.008
KST.DOP.010.060
KST.DON.011.020
BSV.060.010.400
OME.MNP.231.502
KST.DON.011.020
OPE.BBI.572.006
KST.DON.010.060
BSV.030.010.002
BSV.034.010.002
BSV.017.010.008
KST.DOP.010.060
KST.DOP.010.020
BSV.017.010.008
BSV.034.010.002
BSV.030.010.002
KST.DON.010.020
KST.DON.011.020
BSV.060.010.365
OME.MNP.231.502
KST.DON.011.020
KST.DON.010.020
BSV.030.010.002
BSV.034.010.002
BSV.017.010.008
KST.DOP.010.020
B
C

© Copyright BOERplay 30-6-2021 Revision: MOD BBI 711
BSV.011.010.020
x
4
BSV.026.010.035
x
4
BSV.030.010.002
x
4
3/3
Detail E (4x)
BSV.011.010.020
BSV.030.010.002
BSV.026.010.035
E
Powered by TCPDF (www.tcpdf.org)