BOERPLAY UKPE046.07H User manual

Playhouse
UKPE046.07H
Powered by TCPDF (www.tcpdf.org) 1 / 1

Benaming
Title
Opmerking
Comment
Datum
Date
Tekening
Drawing
TOE UKP 046 07H A
Ukkepuk
Hardhout
5-10-2018
Hoofdafmetingen Main dimensions
0,00 m
0,93 m
2,56 m
0,00 m 0,06 m 0,70 m 1,35 m 3,02 m
0,00 m
0,12 m
0,77 m
1,42 m
1,88 m

Benaming
Title
Opmerking
Comment
Datum
Date
Tekening
Drawing
TOE UKP 046 07H A
Ukkepuk
Hardhout
5-10-2018
Obstakelvrije zone Obstacle free zone
Obstakelvrije zone
Obstacle free zone
Opvangzone
Impact area
5,99 m
4,59 m
R1,50m
5,49 m
R1,00m
R1,50m
R1,50m
R1,50m
4,45 m

Benaming
Title
Opmerking
Comment
Datum
Date
Tekening
Drawing
TOE UKP 046 07H A
Ukkepuk
Hardhout
5-10-2018
Bodemplan Groundplan
0,50 m 0,61 m
1,57 m 0,65 m 0,65 m 1,73 m
1,57 m0,66 m0,65 m3,11 m
0,20 m o
0,50 m
0,25 m
0,30 m
0,81 m
0,34 m
1,30 m
0,25 m
1,31 m
Grondmarkering
Ground level marker

Benaming
Title
Opmerking
Comment
Datum
Date
Tekening
Drawing
TOE UKP 046 07H A
Ukkepuk
Hardhout
5-10-2018
Modules Modules
Opmerking
BenamingRev.Bew.
Volgnr.
Progr.Type#
Nr.
UKKEPUK
VLOER VIERKANT 100
HHTUKP
MO31
UKKEPUK
VLOER KWARTRON 102
HHTUKP
MO
1
2
UKKEPUK
WAN JE OH
A
110
HHTUKP
MO
1
3
UKKEPUK
WAN JE LACH
A
111
HHTUKP
MO2
4
UKKEPUKSCHOOLBORA114HHTUKPMO15
UkkepukToonbank
A121HHTUKPMO16
UKKEPUK
Telbollenbuis kwartrond
129HHTUKPMO27
UKKEPUK
SYSTEEMBUIS 130
HHTUKP
MO28
UKKEPUK
TELBOL 134
HHTUKP
MO19
UKKEPUKSTAAN ER VLOER 930MM 145HHTUKPMO710
UKKEPUKKLIMWANA151HHTUKPMO111
Ukkepuk
FornuisB158HHTUKPMO112
Ukkepuk 93 cm
Boomtrap
169
HHTUKP
MO
1
13
UkkepukGroot dak
SB174
HHTUKP
MO114
UkkepukGroot dak
A174HHTUKP
MO
115
93cm VloerGlijbaan
A
178
HHTUKP
MO
1
16
UKKEPUK
STAAN ER VLOER 930MM 185
HHTUKP
MO117
Geleverde modules:
Zie tabel
Montageinstructie:
- De hoofdmaten geven de maten van de staanders en vloeren aan
- De detailtekeningen geven specifiek de maten van de verbindingen aan
- De modules met buizen zi n op de tekeningen bemaat op bovenkant kopplaat
- Overige modules zi n bemaat op de bovenkant (klimwanden, paalkappen, etc.)
Montagevolgorde:
1 - Graaf de gaten volgens het bodemplan
2 - Assembleer toren met 1,10(3x),17,4,8,12
3 - Plaats toren
4 - Plaats 1,10(2x),6,9,14 en verbind deze aan toren
5 - Plaats 1,10(2x),3,4,11,15 en verbind deze aan toren
6 - Plaats 13 en verbind deze aan toren
7 - Plaats 16 en verbind deze aan toren
8 - Controleer of het toestel voldoet aan de afmetingen zoals op blad 'afmetingen'
9 - Dicht de gaten en verdicht het zand
Controles:
1 - Correcte opbouw en alle bevestigingsmiddelen
2 - Controleer de afmetingen van de valbodem t.o.v. het toestel
Supplied modules:
See table
Assembly instruction:
- The main dimensions indicate the dimensions of the posts and floors
- The detailed dimensions show the specific dimensions of the connections
- The modules which contain tubes are dimensioned at the top of the flanges
- Other modules are dimensioned at the top (climbing walls, caps for the posts, etc.)
Installation sequence:
1 - Dig the holes according to the ground plan
2 - Assemble tower with 1,10(3x),17,4,8,12
3 - Place tower
4 - Place 1,10(2x),6,9,14 and attach it to tower
5 - Place 1,10(2x),3,4,11,15 and attach it to tower
6 - Place 13 and attach it to tower
7 - Place 16 and attach it to tower
8 - Check that the unit conforms to the dimensions on sheet 'dimensions'
9 - Close the holes and compacted the sand
Checks:
1 - Correct assembly and all the fasteners
2 - Check the dimensions of the safety area with regard to the play equipment
108 410 12
17
14
10
1
13
6
9
10
277
10
4
3
10
15
11
1
1
16
Typeplaatje
Identification plate
B
5

Benaming
Title
Opmerking
Comment
Datum
Date
Tekening
Drawing
TOE UKP 046 07H A
Ukkepuk
Hardhout
5-10-2018
Afmetingen Dimensions
Voor
(Front)
Links
(Left)
0,00 m
0,24 m
0,93 m
1,14 m
1,25 m
1,65 m
1,84 m
2,56 m
0,00 m
0,07 m
0,27 m
0,53 m
0,93 m
1,65 m
1,84 m
2,56 m
0,00 m
0,25 m
0,77 m
0,93 m
1,13 m
1,65 m
1,84 m
2,56 m
0,00 m
0,93 m
1,25 m
1,65 m
1,84 m
2,56 m

Benaming
Title
Opmerking
Comment
Datum
Date
Tekening
Drawing
TOE UKP 046 07H A
Ukkepuk
Hardhout
5-10-2018
Afmetingen Dimensions
Back
(Right)
Rechts
(Right)
0,00 m
0,40 m
0,93 m
1,65 m
1,84 m
2,56 m
0,00 m
1,65 m
1,84 m
2,56 m
0,00 m
0,93 m
1,65 m
1,84 m
2,56 m
0,00 m
0,24 m
0,40 m
0,77 m
0,93 m
1,13 m
1,65 m
1,84 m
2,56 m

LOGBOOK
Type indication
Article number UKPE046.07H
Product Name Playhouse
Maximum fall height 1,3 m
Construction year 2024
Certificate 142059
Inspection body Keurmerkinstituut
Groeneweg 2e, Zoetermeer
2718AA Zoetermeer
Manufacturer name Boer Speeltoestellen
Hyacintstraat 2 - 4255 HX Nieuwendijk
Phone: [phone]
Fax: [phone]
Installer name _______________________________________________________
_______________________________________________________
_______________________________________________________
Playground location _______________________________________________________
Information about the owner of the playground
Name: _______________________________________________________
Address: _______________________________________________________
Zipcode and city: _______________________________________________________
Contact: _______________________________________________________
Phone number: _______________________________________________________
Information about the manager of the playground
Name: _______________________________________________________
Address: _______________________________________________________
Zipcode and city: _______________________________________________________
Contact: _______________________________________________________
Phone number: _______________________________________________________
Powered by TCPDF (www.tcpdf.org)

LOGBOOK
Inspection and maintenance
Date of
inspection
maintenance
Time of
inspection
maintenance
Name
executor of
inspection
Name
executor of
maintenance
Found defects Parts to be
replaced
Accidents
Date
accident
Age of
victim Probable cause of injury Occurred injury Measures taken after accident

Inspection and maintenance intervals
Nr Inspection Maintenance
months
between
inspections
1
Verify equipment's stability, junctions and
missing parts Inspect bolts, screws and nuts for
absence, jams, corrosion and wear
Add missing parts, secure joints, apply
missing fixing agent and replace
corroded parts
1
2
Check suspension for wear Replace worn parts and/or remove non-
functioning parts
1
3
Inspect rotating parts such as hinges, rolling-
element bearings, etc for wear and acceptability
Replace worn parts and/or remove non-
functioning parts
1
4
Check wood for splinters, unacceptable damage
and signs of rot, especially at ground level
Repair damage Replace affected wood
Smoothen splintered wood and sharp
edges
1
5
Inspect foundation for stability, tearing and
coverage
Restore foundation and covering
material
3
6
Examine rubber and synthetic parts for wear,
damage and breakage Replace for OEM original parts
3
7
Examine fibre reinforced plastic parts, especially
slides, for wear
Replace for OEM parts if the fibres are
visible
6
8
Inspect metal for corrosion and damage in the
coating
Restore any damaged coating (after
removing rust and applying primer)
6
9
Check ropes, cables, chains and nets for wear
and damage Steel cables and nets which are
tensioned must be checked for tension
Replace parts where necessary Steel
cables and nets must be tensioned
3
10
Inspect equipment for unsafe changes and
additions
Remove unsafe additions and correct
unsafe changes
1
11
Inspect safety surfaces Restore and repair where necessary
1
Remarks
1 If used intensively, all points require extra attention
2 Extreme weather conditions and locations may require a higher inspection frequency Discuss this with the
supplier
3 Vandalism-sensitive locations require stricter inspections, possibly daily
4 Re-tighten all connections in Robinia equipment two months after first use
5 Re-span spatial networks two months after first use
6 Check the terrain regularly for items that do not belong there, are unsafe or may be used wrongly Examples
are poisonous plants, glass shards, etc Frequency depends on strain