BOERPLAY Windmill User manual

Windmill
RBPE000.033
Powered by TCPDF (www.tcpdf.org) 1 / 1

Benaming
Title
Opmerking
Comment
Datum
Date
Tekening
Drawing
TOE RBP 000 033
Windmolen
8-10-2020
Hoofdafmetingen Main dimensions
0,00 m
1,96 m
2,10 m
2,25 m
0,00 m
0,11 m
2,34 m
2,62 m
3,48 m
3,79 m
5,97 m
6,10 m
0,00 m 0,76 m 2,09 m 3,19 m 3,30 m 0,16 m 2,75 m
> 0,24 m
> 0,40 m
0,05 m
> 0,40 m

Benaming
Title
Opmerking
Comment
Datum
Date
Tekening
Drawing
TOE RBP 000 033
Windmolen
8-10-2020
Obstakelvrije zone Obstacle free zone
Obstakelvrije zone
Obstacle free zone
Opvangzone
Impact area
7,52 m
10,04 m
2,05 m
R1,97m
R1,97m
R1,97m
R1,97m
R1,97m
R1,97m
R1,97m

Benaming
Title
Opmerking
Comment
Datum
Date
Tekening
Drawing
TOE RBP 000 033
Windmolen
8-10-2020
Bodemplan Groundplan
B
Grondmarkering
Ground level marker
2,09 m 1,08 m 1,35 m 0,93 m 2,52 m 2,03 m
2,10 m
2,21 m2,11 m 0,25 m
2,23 m
0,27 m
0,87 m
0,64 m
0,75 m
0,46 m 0,13 m
0,14 m
0,82 m
> 0,40 m

Benaming
Title
Opmerking
Comment
Datum
Date
Tekening
Drawing
TOE RBP 000 033
Windmolen
8-10-2020
Modules Modules
Typeplaatje
Identification plate
B
1
1
1
1
1
1
1
1
1
Geleverde modules:
Zie tabel
Speciaal gereedschap
N.V.T
ontageinstructie:
- De hoofdmaten geven de maten van de staanders en vloeren aan
- De detailtekeningen geven specifiek de maten van de verbindingen aan
ontagevolgorde:
1 - Graaf de gaten volgens het bodemplan
2 - Plaats 1 (9x)
3 - Plaats 2, verbind deze met (2x) 1
Pallen afvlakken voor montage
4 - Plaats 3, verbind deze met (3x) 1
5 - Plaats 4, verbind deze met (3x) 1
6 - Plaats 5, verbind deze met (3x) 1, 4 en 3
7 - Plaats 6, verbind deze met (4x) 1, 3 en 4
8 - Plaats 7, verbind deze met (2x) 1 en 5
9 - Plaats 9, verbind deze met 4
10 -Plaats 8 (2x), verbind deze met 6
11 - Plaats 10 (6x), Verbind deze met 4
12 - Plaats 11 (2x), verbind deze met (2x)1
13 - Controleer of het toestel voldoet an de afmetingen zoals op blad 'afmetingen'
14 - Stort beton
15 - Dicht de gaten en verdicht het zand
Controles:
1 - Correcte opbouw en alle bevestigingsmiddelen
2 - Controleer de afmetingen van de valbodem t.o.v. het toestel
Supplied modules:
See table
Special tools
N/A
Assembly instruction:
- The main dimensions indicate the dimensions of the posts and floors
- The detailed dimensions show the specific dimensions of the connections
Assembly sequence:
1 - Dig the holes according to the ground plan
2 - Place 1 (9x)
3 - Place 2 attach it with (2x) 1
Flatten the poles before mounting.
4 - Place 3 attach it with (3x) 1
5 - Place 4 attach it with (3x) 1
6 - Place 5 attach it with (3x) 1, 4 and 3
7 - Place 6 attach it with (4x) 1, 3 and 4
8 - Place 7 attach it with (2x) 1 and 5
9 - Place 9 attach it with 4
10 - Place 8 (2x) attach it with 6
11 - Place 10 (6x) attach it with 4
12 - Place 11 (2x) attach it with (2x) 1
13 - Check that the equipment conforms to the dimensions shown on sheet 'dimensions'
14 - Pouring concrete in the hole
15 - Close the holes and compact the sand
Checks:
1 - Correct assembly and all the fasteners
2 - Check the dimensions of the safety area with regard to the play equipment
2
3
4
5
6
7
8
8
9
10 (6x)
11 (2x)

Benaming
Title
Opmerking
Comment
Datum
Date
Tekening
Drawing
TOE RBP 000 033
Windmolen
8-10-2020
Modules Modules
Opmerking
BenamingRev.Bew.
Volgnr.
Progr.Type#
Nr.
BoorplanPalenplan
033000RBPMOD11
RBP
Verticaal net
033004RBPMOD12
Ligger 3, 5 m 032004RBPMOD13
RBP
Klimwand
002008
RBP
MOD
14
RBP
Klimtouw 1,6 m
025010
RBP
MOD1
5
L= 1,8 mKlimtouw 023010
RBP
MOD26
2.0 mhercules touw 024010
RBP
MOD2
192 Liter cement
Beton voor staander
999999
RBP
MOD98
2
7
6
5
8
4
3

Benaming
Title
Opmerking
Comment
Datum
Date
Tekening
Drawing
TOE RBP 000 033
Windmolen
8-10-2020
Modules Modules
Doorboren
Drill through
Doorboren
Drill through

LOGBOOK
Type indication
Article number RBPE000.033
Product Name Windmill
Construction year 2024
Manufacturer name Boer Speeltoestellen
Hyacintstraat 2 - 4255 HX Nieuwendijk
Phone: [phone]
Fax: [phone]
Installer name _______________________________________________________
_______________________________________________________
_______________________________________________________
Playground location _______________________________________________________
Information about the owner of the playground
Name: _______________________________________________________
Address: _______________________________________________________
Zipcode and city: _______________________________________________________
Contact: _______________________________________________________
Phone number: _______________________________________________________
Information about the manager of the playground
Name: _______________________________________________________
Address: _______________________________________________________
Zipcode and city: _______________________________________________________
Contact: _______________________________________________________
Phone number: _______________________________________________________
Powered by TCPDF (www.tcpdf.org)

LOGBOOK
Inspection and maintenance
Date of
inspection
maintenance
Time of
inspection
maintenance
Name
executor of
inspection
Name
executor of
maintenance
Found defects Parts to be
replaced
Accidents
Date
accident
Age of
victim Probable cause of injury Occurred injury Measures taken after accident

Inspection and maintenance intervals
Nr Inspection Maintenance
months
between
inspections
1
Verify equipment's stability, junctions and
missing parts Inspect bolts, screws and nuts for
absence, jams, corrosion and wear
Add missing parts, secure joints, apply
missing fixing agent and replace
corroded parts
1
2
Check suspension for wear Replace worn parts and/or remove non-
functioning parts
1
3
Inspect rotating parts such as hinges, rolling-
element bearings, etc for wear and acceptability
Replace worn parts and/or remove non-
functioning parts
1
4
Check wood for splinters, unacceptable damage
and signs of rot, especially at ground level
Repair damage Replace affected wood
Smoothen splintered wood and sharp
edges
1
5
Inspect foundation for stability, tearing and
coverage
Restore foundation and covering
material
3
6
Examine rubber and synthetic parts for wear,
damage and breakage Replace for OEM original parts
3
7
Examine fibre reinforced plastic parts, especially
slides, for wear
Replace for OEM parts if the fibres are
visible
6
8
Inspect metal for corrosion and damage in the
coating
Restore any damaged coating (after
removing rust and applying primer)
6
9
Check ropes, cables, chains and nets for wear
and damage Steel cables and nets which are
tensioned must be checked for tension
Replace parts where necessary Steel
cables and nets must be tensioned
3
10
Inspect equipment for unsafe changes and
additions
Remove unsafe additions and correct
unsafe changes
1
11
Inspect safety surfaces Restore and repair where necessary
1
Remarks
1 If used intensively, all points require extra attention
2 Extreme weather conditions and locations may require a higher inspection frequency Discuss this with the
supplier
3 Vandalism-sensitive locations require stricter inspections, possibly daily
4 Re-tighten all connections in Robinia equipment two months after first use
5 Re-span spatial networks two months after first use
6 Check the terrain regularly for items that do not belong there, are unsafe or may be used wrongly Examples
are poisonous plants, glass shards, etc Frequency depends on strain