BOLDLY GROWING BGLPK84 User manual
Step 2 Step 3
Connect the other End Panel Assembly
(completed in Step 1) to Side Panel (A)
using hardware (J) and (K) as indicated.
Connect a Side Panel (A) to one End
Panel Assembly using hardware (J) and
(K) as indicated.
Use caution not
to overtighten
screws
Attach the End Panel (B) to two legs (E &
F) using the shorter of the two screw types
provided (L). Repeat for the other side.
Note: the pre-drilled holes in the legs
should not be covered up during this
step.
Step 1
Logo (H)
1pcs
Fabric Liner (I)
1pcs
Divider (G)
1pcs
Lower Shelf (C)
1pcs
Leg (E)
2pcs
Leg (F)
2pcs
30mm
screw (L)
16pcs
Floor Panel (D)
2pcs
35mm
screw (M)
10pcs
50mm bolt (J)
8 sets (24 pcs)
60mm bolt (K)
4 sets (12pcs)
Nail (N)
2pcs
End Panel (B)
2pcs
Side Panel (A)
2pcs
Thank you
We hope you enjoy your planter! Check out our Youtube channel or Facebook
page for assembly videos, soil mix recommendations, and food-safe,
water-resistant coating recommendations. Please don’t hesitate to reach out
to us directly if you have any questions – we love hearing from our customers!
Assembly Video
Raised Garden Planter with Shelf (BGLPK84)
Assembly Guide
Scan with your smartphone camera
to watch ourassembly video!
Because we make our products with natural wood, dragging a fully
loaded planter can cause the legs to split. We recommend positioning
the planter as desired before adding dirt to prolong the life of your
product.
Tip
Your feedback allows us to design and build quality products for you.
If you have any problems with your product, please contact us at
Need Help?
Assembly Instructions
Box Contents
K
JJ
K
A
F
B
E
L
Step 5 Step 6
Step 8
Done!
Connect the other Side Panel (A) on the
opposite side (shown on the left) using
hardware (J) and (K) as indicated on the
right.
Set the planter upright and add both
Floor Panels (D). Secure with the longer
of the two screw types (M).
Add the Lower Shelf (C) using hardware
(J) as shown.
Step 4
Install the divider (G) using the last two
screws (M). Add the Fabric Liner (I).
Your raised planter is now ready for use!Optional: Add the logo plate (H) using the
two nails (N) provided.
Step 7
Raised Garden Planter with Shelf (BGLPK84)
Assembly Guide
Assembly Instructions (cont.)
Will you share a photo of your new raised bed? Just post a photo on Facebook and type @boldlygrowing to tag us,
or share on Instagram and type #boldlygrowing in your post – we love seeing these posts!
C
J (x4)
D (x2)
M (x4
per panel)
K
A
JK
J
M (x2)
G
I
H
Table of contents
