boori Heron Compact Cot User manual

B-HECCO
Heron
Compact Cot

Assembly instructions
NOTE: Use only spare parts approved by the manufacturer
FOR AUSTRALIA AND NEW ZEALAND (AS/NZS 2172:2013)
RECOMMENDED MATTRESS SIZE 1190mm X 650mm X 110mm
This cot has been manufactured for use with a mattress which measures 650mm wide by 1190mm long and 110 mm in
thickness . The width and length are specified because it is important that the gaps between the mattress and the sides
and ends of the cot will not exceed 40mm when the mattress is pushed to one side or end , and 20 mm when the mattress
is centred in the cot . The thickness of the mattress has been specified to ensure that the depth of the cot is greater than
500 mm with the mattress base in the lower position to minimise the risk of a child climbing or falling out of the cot.
WARNING:
* TO ENSURE THE SAFETY OF YOUR COT,REGULARLY CHECK ALL THE CONNECTING BOLTS AND GLIDE PINS
MAKING SURE THEY ARE TIGHT.
* TO PREVENT FALLS OR SUFFOCATION THE MAXIMUM MATTRESS THICKNESS SHOULD NOT EXCEED 110MM
*
* Follow the manufacturer’s assembly instructions in detail to ensure the safety features of the cot are not compromised.
* Ensure the cot is placed at a reasonable distance from curtains, blinds, heaters and power points.
* Keep cot free of any toys, cushions etc that could be used as a foothold or present a danger of suffocation or
strangulation.
* Keep medication, String, elastic or small items such as money out of reach from any position in the cot.
RECOMMENDED MATTRESS SIZE 1190mm X 650mm x 110mm
If you leave the child unattended in the cot, always make sure that the dropside is in the highest position.
This cot has been manufactured for use with a mattress which measures 650mm wide by 1190mm long and a maximum
thickness of 110mm. The width and length shall be such that the gap between the mattress and the sides and ends
does not exceed 30mm. The thickness of the mattress has been specified to ensure that the depth of the cot is greater
than 500mm with the mattress base in the lower position and 200mm with the mattress in the highest position to
minimise the risk of a child climbing or falling out of the cot.
WARNING:
* TO ENSURE THE SAFETY OF YOUR COT , REGULARLY CHECK ALL THE CONNECTING BOLTS AND GLIDE PINS
MAKING SURE THEY ARE TIGHT, CARE SHOULD BE TAKEN THAT NO SCREWS ARE LOOSE BECAUSE A CHILD
COULD TRAP PARTS OF THE BODY OR CLOTHING (EG. Strings, necklaces,ribbons for babies dummies), WHICH
WOULD POSE A RISK OF STRANGULATION.
* TO PREVENT FALLS, THE MAXIMUM MATTRESS THICKNESS SHOULD NOT EXCEED 110MM.
*
* TO PREVENT INJURY FROM FALLS WHEN THE CHILD IS ABLE TO CLIMB OUT OF THE COT, THE COT SHALL NO
LONGER BE USED FOR THAT CHILD.
* Be aware of the risk of open fire and other sources of strong heat, such as electric bar fires, gas fires, etc.in the near
vicinity of the cot.
* Do not use the cot if any part is broken, torn or missing and use only spare parts approved by the manufacturer.
* Do not leave anything in the cot or place the cot close to another product,which could provide a foothold or present a
danger of suffocation or strangulation, e.g.strings, blind/curtain cords,etc.
* Do not use more than one mattress in the cot.
WARNING: ( BS 8509:2008+A1:2011 )
* The child’s bed conforms to BS 8509:2008 +A1:2011
* Recommended mattress size 1190mm x 650mm x 110mm
* Suitable for a child from 18months to 4 years old.
* Do not place this child's bed near heat sources, windows and other furniture.
* Do not use this child's bed if any part is broken, torn or missing.
* The bed is designed to be dismantled for storage or transportation.
* All assembly fittings should always be tightened properly and checked periodically.
* Children are likely to play, bounce, jump and climb on beds, therefore the child's bed should not be placed too close
to other furniture or windows, blind cords, curtain pulls or other strings or cords, and should be placed either tight to
any wall or have a gap of 300mm between the wall and the side of the bed.
THE LOWEST POSITION IS THE SAFEST AND THE BASE SHOULD ALWAYS BE USED IN THAT POSITION AS SOON
AS THE BABY IS OLD ENOUGH TO SIT UP.
WARNING: TO PREVENT FALLS, THE MATTRESS BASE OF THIS COT SHOULD BE ADJUSTED TO THE LOWEST
POSITION BEFORE THE CHILD CAN SIT UP.
FOR THE UK ( EN 716-1-2 : 2017 )
* All assembly fittings should always be tightened properly and that fittings should be checked regularly and retightened
as necessary.

B-LI3DCSA
Linear
3 drawer chest smart assembly
利尼尔三斗柜（巧装系列）
重要：请仔细阅读此说明书，并妥善保管以便日后参考。