Bosch Dinion HD 1080p User manual

What to demo How to demo Key points
Audio capability
Connect a mobile audio device to the
camera’s audio input (black) using
3.5 mm jack.
Make sure PC has speakers for sound playback.
From the browser’s Encoder menu,
select ‘Audio.’ Make sure audio is on.
Play audio device and increase the
volume in the browser window until
sound is heard from PC’s speakers.
Play back music or vocals from audio device.
Demo 8: Audio
Key message: HD camera capability includes two-way audio
Bosch Security Systems
For more information please visit
www.boschsecurity.com
or send an e-mail to
emea.securitysyst[email protected]
All rights reserved
Printed in the Netherlands
VS-EH-en-59_F01U559881_01
Purpose
This document describes how to set up and demonstrate Bosch Dinion HD 1080p and FlexiDome HD 1080p cameras.
It includes:
Demonstration scenarios
Equipment requirements
Configuration instructions
Recommendations on how to best demonstrate the cameras’ strengths
How to demo Dinion HD 1080p and
FlexiDome HD 1080p cameras
Simulate sound source by playing back music over the
PC’s speakers from a mobile audio device connected to
the camera.

CCTV | How to Demo FlexiDomeDN IP Cameras en
Bosch Security Systems
CCTV | How to Demo FlexiDomeDN IP Camerasen
Bosch Security Systems
CCTV | How to demo Dinion HD 1080p and FlexiDome HD 1080p cameras en
Bosch Security Systems
CCTV | How to demo Dinion HD 1080p and FlexiDome HD 1080p camerasen
Bosch Security Systems
Perfect picture quality
When monitoring colorful scenes with a high amount
of activity, seeing all the details is critical for safety
and security. Part of the Bosch high definition (HD)
portfolio, the Dinion and FlexiDome HD 1080p Day/
Night IP cameras deliver uncompromising vision even
in the busiest scenes. Combining very high resolution
images with excellent low light operation and color
reproduction, these high quality systems deliver
best-in-class performance.
A specially selected image sensor delivers superior
detection and analysis even in low light conditions.
Images are clearer and have less motion blur, making
it easier to identify items. They also require less
bandwidth to transmit due to reduced image noise.
Even in low light conditions, first-class color
reproduction delivers a clear differentiation between
color tones
Smart Backlight Compensation (BLC) automatically
compensates the image by optimizing light levels for
objects of interest without compromising the Dynamic
Range. Additionally, the sharpness slider applies
detail enhancement to the whole scene, while
sharpness automatically enhances every pixel.
Reduced storage, automatic scene analysis
and alarm functionality
H.264 video compression ensures the best image
quality, while minimizing storage and bandwidth
requirements. Bosch IVA can analyze a scene and alert
your security personnel to any suspicious activity.
Alarm functionality enables you to trigger alarm
systems or start the camera recording when an event
is detected. And, audio lets you hear as well as see
what is going on. The camera sends an alarm for
sudden or loud noises, alerting your security team to
a potential problem.
Local Storage & Automatic Network
Replenishment (ANR)
Dinion HD & FlexiDome HD cameras support local
storage with a microSD card. The cameras support
SXHC microSD cards and can use microSD cards with
up to 2 TB. Local storage can be used for alarm
recording or for ANR.
Easy installation
Bosch IP cameras are easy to set up. Just mount, plug
in, and they operate immediately on the IP network.
Software detects and configures the cameras
automatically while allowing quick changes to be
made to the settings. It’s easy to get the sharpest
image the first-time thanks to our best-in-class
motorized auto-back-focus.
To make installation and configuration easy, the
Dinion HD and FlexiDome HD are shipped with Bosch
Video Client (BVC) and configuration client. The
cameras comply with PoE (Power over Ethernet) and
are ONVIF conformant.
Dinion HD allows for customization with specific
lenses and housings while the FlexiDome HD comes
with lens, housed in a convenient, rugged dome.
Equipment
Here is the equipment you need for the demos.
FlexiDome HD 1080p system
Camera
PSU (Optional)
PoE compliant Ethernet Switch
BVC & Configuration Manager version BVC 1.1.500 or
later
PC with Internet Explorer 6 or later1
Monitor2
Fixed body Dinion HD 1080p system
Camera
PSU (Optional)
PoE compliant Ethernet Switch
BVC & Configuration Manager
HD Lens
Desk tripod
IR Illuminator
PC with Internet Explorer 6 or later1
Monitor2
Demonstration materials (from Dinion 2X demo kit)
Colorful toy (little demo duck)
VRM with iSCSI (only for ANR demo)
Audio demonstration material
Mobile audio device (or Mp3 Player)
Connecting cable with 3.5 mm jack
Notes
1 See user manual for current system requirements.
2We recommend you use a Bosch HD Monitor 16:9
format.
Step Camera Actions Key points
1a Both
Take camera out of its box.
Dinion  Connect varifocal lens
 Put camera on tripod
FlexiDome  Put on table
 Remove front cover
2 Both Connect power supply – low voltage
DC/AC or PoE, or both
Both power sources can be attached simultaneously
for extra power.
3 Both
Connect the camera and PC with BVC
& Config manager to the network
switch
It’s important that you preset the PC IP address to
known value, and you should have the IP address that
you need to set for the camera ready with you.
Also can be highlighted that camera supports Auto
MDIX and can be connected either with cross over or
straight LAN cable.
4 Both
Start the Config manager in advance
mode and run the network scan
Right click on the newly found device
and change the IP address to the same
network segment as the PC and rescan
the network to ensure that the camera
has changed the IP address.
You will now see the camera in the list. Right click on
the camera and set the pre known IP address in the
camera.
At the time of the network scan, keep the IP address of
the PC in different range then of the camera (e.g., if
default IP address of camera is 192.168.0.1, keep the
PC IP address in 10.10.183.1.) Highlight to the
customer that it’s easy to find the camera, even if the IP
addresses are in a different range.
5 Both
Right click on the camera in the
scanned camera list and open the
camera in a Web browser
Show the customer that he can access all the camera
features either in Config manager or in a Web browser
6 Dinion
Select the installer menu in the Web
browser and launch the new Lens
Wizard
Set the back focus in the middle
position
Set the FOV & Focus
Set the focus area and perform a full
range auto focus
If required adjust the focus area and
perform a local range auto focus
Highlight to the customer that launching the Lens
Wizard opens the Iris automatically and then he can
select the FOV and set the Focus.
Highlight to customer that he can ensure proper focus
in the region of interest.
Highlight to the customer that he can use non-IR
corrective lenses. Remove the check box ir-corrective
lens and adjust in the other DN-mode
7 Both Configure the IP camera Can be done via Internet Explorer, the camera menu
or the configuration tool. Choose your favorite!
Demo 1: Installation and configuration
Key message: ease of installation / set-up
Ease of installation is shown more clearly by demonstrating
the fixed-body IP camera, so we recommend you use the
Dinion HD unless your customer expressly asks for the
FlexiDomeHD IP.
In both cases the features demonstrated are the same.
The steps below guide you through the installation demo for
both Dinion IP and FlexiDome IP cameras. The configuration
manager and all other software are on the disk and should
be installed prior to giving the demo.

CCTV | How to Demo FlexiDomeDN IP Cameras en
Bosch Security Systems
CCTV | How to Demo FlexiDomeDN IP Camerasen
Bosch Security Systems
CCTV | How to demo Dinion HD 1080p and FlexiDome HD 1080p cameras en
Bosch Security Systems
CCTV | How to demo Dinion HD 1080p and FlexiDome HD 1080p camerasen
Bosch Security Systems
Key message: Automatic image compensation in backlit scenes
What to demo How to demo Key points
Smart BLC
 Hold the demo duck in front of a bright
light (e.g. overhead light).
 Move the duck to different areas in the
camera view.
 Picks out details that cannot normally be
seen.
 Even helps to penetrate mist and fog.
Demo 4 (optional): Smart BLC
What to demo How to demo Key points
Efficient use of
bandwidth and Quad-
streaming capability
Show the video over IP on the PC’s
browser.
Go to the ‘Settings’ page and show the
various fields.
From Camera > Encoder Profile, show the
flexibility of predefining the encoding
quality for different profiles
From the Camera > Encoder Streams
menu, select ‘Property.’ Set ‘Stream 1’
to “H.264 MP 1080p 25/30 fixed,” and
select Non-Recording Profile as one of
the available profiles.
Set Stream 2 to
a.) Copy of stream 1
b.) H.264 BP+
c.) H.264 MP SD
Explain to customer the benefits of the
different property of stream 2
Click on the Preview Tab and show the
image quality of stream 1 & stream 2.
Also, adjust the JPEG stream to different
FPS and quality setting for demo.
The fourth stream (e.g., I Frame only
stream can be demonstrated using the
RTSP mode in VLC player and using
the URL rtsp://<ipaddr>/?inst=3
Dual H.264 streams for high/low quality, an
MJPEG stream for very low frame rates
and compatibility with third-party video
management systems. (ONVIF
conformance also aids feature
compatibility between different devices.)
The IP camera is ‘Quad-streaming’ – four
different IP streams at different image
sizes, compressions and frame rates.
This allows streaming of (i) high quality
images for live viewing, while (ii)
recording at a lower frame rate and (iii)
simultaneously sending JPEG
images/I-frames to third-party video
management systems or a remote PDA
device.
Demo 3: IP functionality
Key message: see more clearly in harsh lighting conditions and reveal more detail
What to demo How to demo Key points
Wider Field of View
Place the Dinion HD camera with HD
Lens next to Dinion IP (NBC 455) and
use the same lens on both cameras
Show the customer that the HD camera has
much wider FOV when compared to SD
cameras
More details with same
FOV (HD vs. SD)
Place the Dinion HD camera with HD
Lens next to Dinion IP (NBC 455) and
use the same lens on both cameras.
Ensure both cameras have similar FOV
Use the Digital zoom feature of BVC to
zoom into the text on box
Use some box or object with visible text on
it (e.g., packaging box of FlexiDome). Place
the objects within 2m to 3m from the
cameras
Key message: HD camera has more pixel
density (approx 3 times) for same FOV
Demonstrate in BVC that the customer can see HD & SD camera simultaneously, so we have one solution for the
entire family.
Demo 2: HD image processing
Key message: delivering high quality, real-time H.264 video over IP
The superior performance of Bosch cameras due to
advanced image processing is shown in the Competition
benchmarking slides of the introduction presentation.
Follow the instructions below to demonstrate IP
functionality of both Dinion HD and FlexiDome HD cameras.
Use the demo duck toy to demonstrate the benefits of
Smart BLC.
You can also find video snapshots illustrating this feature
on the introduction presentation.

CCTV | How to Demo FlexiDomeDN IP Cameras en
Bosch Security Systems
CCTV | How to Demo FlexiDomeDN IP Camerasen
Bosch Security Systems
CCTV | How to demo Dinion HD 1080p and FlexiDome HD 1080p cameras en
Bosch Security Systems
CCTV | How to demo Dinion HD 1080p and FlexiDome HD 1080p camerasen
Bosch Security Systems
Key message: Intelligence at the edge – processing done in the camera, not in a central
video management or PC station
What to demo How to demo Key points
IVA Using the browser
settings
Show Motion+ Intelligence at the edge
– IVA performed by the IP camera itself.
 IVA To show more about IVA, use existing
IVA demo tools.
Demo 6: Intelligent Video Analysis (IVA)
Key message: Up to four easily configurable privacy zones
What to demo How to demo Key points
Privacy zones
In the Install menu, choose ‘Privacy
masking’, then ‘Pattern’. Activate one of
the four masks and adjust it onscreen.
 Can set up to four mask areas.
 Easy to adjust size and position.
Demo 5 (optional): Privacy zones Demo 7: Local Storage
Key message: Dinion HD & FlexiDome HD can store video locally on a microSD card
What to demo How to demo Key points
Local Storage
Capabilities
Insert a microSD SD card
(preferably 64 GB) into the camera.
Show to customer the accessibility of microSD
slot and the physical protection of the SD card
with the SD card CAP in the Dinion as well as
how the SD card is protected in the vandal
proof housing of the FlexiDome.
Start the recording
For the ease of starting the recording,
use the Basic Mode option from the Web
browser setting page.
Select the recording menu > Select SD
card as Storage Medium and click > Start
Ease of starting the recording
Highlight to customer the feedback
“recording Started Successfully”
Playback
Wait for a few seconds and then select
the recording link in the top menu
(Next to Live Page hyperlink)
Demonstrate the playback from the
Web browser.
Local Storage
Advanced options
From the advanced mode, select
recording and demonstrate various
recording options for local storage.
Demonstrate to customer that scheduled
recording or event-based recording with
profile switching is possible on the cameras.
Automatic Network
Replenishment
(Optional)
Start the local recording in the camera
as explained above.
Select ANR option from the VRM
configuration.
Disconnect the camera from the
network. The customer will not see
the live video on the screen any more.
During the period that the camera is
disconnected from the network, make
some motion in front of the camera,
which the customer cannot see on the
live viewing page.
Wait for few seconds and reconnect the
camera back to the network.
From the BVC, replay the recording on
VRM and point out the location where
the video is recovered and show the
customer the motion that he did not
see on the live page, as the camera
was disconnected from the network.
Ensure that VRM, BVC and camera have the
same time.
For ANR demo, ensure that the camera is
powered with a local PSU. If the camera
is powered on POE, and you remove the
network cable, it will stop the local
recording.
Highlight to the customer the advantage of
local storage and the added reliability that
is possible with ANR.
This demo is easy to show the customer with the camera
on a table. Follow the steps below to guide you through
the Privacy zones demo.
Demonstrate local recording in microSD card and
optionally demonstrate Dual recording and ANR (if VRM
is also available).
For ANR ensure that duration of gap is more than 1
minute.