Bosch 605007 User manual

Installing New Style 605007 Dishwasher Mounting Brackets
Reprint from general installation instructions 9000157505
If your dishwasher has the pre-attached
mounting brackets shown and you have a
wooden undercounter, ensure that brackets
are positioned as far apart as possible by
sliding them within slots in direction of
arrows. Do not attach to countertop yet.
If your dishwasher has the pre-attached mounting brackets shown in figure
7, and the counter top is stone, using pliers, rotate the bracket flanges so
that you are able to remove brackets from the top. Grasp bracket with
pliers at perforation and bend until rounded end breaks free. Discard end.
Slip brackets through side slots. Using pliers, bend bracket flanges such
that the brackets will not slip through slots. Do not attach to countertop yet.
Page 1 of 2
Top mount (wooden
under-counter)
Side mount (stone
under-counter)
NOTE: Side mounting of
brackets does not interfere
with side trim strips.
702_58300000121289_abz_en_a

Installing New Style 605007 Dishwasher Mounting Brackets
Reprint from generic installation instructions 9000157505
Level horizontally by turning feet (1) clockwise to raise or counter-clockwise to
lower front of unit. Level vertically by turning center screw (2) to raise or lower
the back. Once level, (3) insert leg leveler locking screws (part G) and tighten.
Insert screws (part A) through pre-positioned mounting brackets and attach unit
to enclosure (pre-drilling of holes recommended).
Page 2 of 2
If your dishwasher does NOT have pre-
attached mounting brackets (part N)
shown in figure 7, attach the mounting
brackets to the top of unit as shown in
(1.1) for stone and in (2.1) for wooden
undercounter. Do not attach to countertop
yet.
Older style
mounting
brackets
702_58300000121289_abz_en_a