4 Easy Steps to Clean Dishes
Fill
with
Detergent
2
OPEN LID FILL DISPENSER CLOSE DISPENSER
Fill
with
Rinse Aid
3
OPEN LID FILL DISPENSER CLOSE DISPENSER
Load
Dishwasher
1
TOP/ BOTTOM RACK Adjust TOP RACK RACKMATIC ADJUSTMENT
Start
Program
4
TURN ON SELECT CYCLE
HOW MUCH DETERGENT?
PROBLEMS POSSIBLE SOLUTIONS
Unsatisfactory Incorrect amount of detergent or rinse agent.
Washing Results Inappropriate program selected.
Rack overloaded.
Wash arm rotation blocked.
Clogged nozzles in wash arms.
Make sure the filter is locked in place.
No Power or No water Check circuit breaker and make sure that water
and electrical lines are connected.
White Deposits Too little rinse aid used.
Streaks on Dishes Too much rinse aid used.
Residual Water Obstruction in large object trap.
Kink in drain hose.
Air gap clogged.
Check to make sure kitchen sink is draining well,
if not, you may need a plumber instead of a
dishwasher repairman.
Dishes not Drying Make sure rinse aid dispenser is full and check
the materials section and make sure it is set at
the right water hardness.
Suds Make sure only automatic dishwasher detergents
are used. Refer to Detergent Usage Chart on
this Quick Reference Guide.
Detergent Dispenser First, check to make sure you push down on the
cover will not close arrow with your thumb, while closing the dispenser.
A program was not completely finished. Cancel
drain, turn off, then on, then try to close dispenser
cover again.
Food redeposited Make sure the filter is locked in place.
on dishes
If you cannot correct the problem
yourself, contact a customer service
representative at the Customer Service
Number listed on the ID Label on the
right side of Dishwasher door, or in
the Use & Care Manual.
* If you are not sure of the hardness of your water,
ask your local water company .
Items NOT RECOMMENDED
to Put in Your Dishwasher
See “Materials Chart” in Use &
Care Manual for details.
- Acrylic
- Adhesive Joinded Items
- Bone Handled Utensils
- Iron
- Non-Dishware Items
- Pewter, Brass & Bronze
- Sterling Silver& Silverplate
- Tin
- Wood
If you are not sure an item is
dishwasher safe, inquire
through the manufacturer
of the item.
TROUBLESHOOTING
PUSH CANCEL DRAIN TO
INTERRUPT OR END A CYCLE.
SELECT SPECIAL
FEATURE (Optional)
With soft
water, use
less detergent
After selecting
a program
cycle, you can
also choose a
special feature
cycle.
If dishes
do not dry
properly,
check to
make sure
rinse agent
dispenser
is full and
set for
appropriate
water hardness.
Dispenser holds 3.5 oz.
of rinse agent.
Push down on base
of arrow to lock while
sliding cover closed.
Push in handles
simultaneously
while pulling
up or pushing
down, depending
on height desired.
DISHWASHER QUICK
REFERENCE GUIDE
5602045832
CUSTOMER SERVICE
25 ml
15-25 ml
Hard
Medium
Soft
Water
Type
25-45 ml less
less
less
more
more
more
Types of Wash Cycles
Lighter
Wash
Cycles
Regular
Wash
Heavier
Wash
Cycles
Run time can vary depending
on cycle selected, amount of soil
and temperature of incoming water.
WHY DOES THE WASH
CYCLE TAKE SO LONG?
WHEN ARE MY
DISHES CLEAN?
1. When CLEAN LIGHT
INDICATOR is illuminated
2. If LED displays: CL or O
3. If CYCLE COMPLETION
SIGNAL beeps.
(To disable the beeper see
“Special Features” section in
Use & Care Manual.)
RINSE AID DIAL
SOFTER
HARDER
WATER TYPE
Depending on Model
