Bosch WQG245D1FG User manual

Tumble dryer
WQG245D1FG
User manual and
installation instructions
Translated from Dutch to English - www.onlinedoctranslator.com

NL
Refer to the Digital User's Guide for more
information.
Table of contents
1 Safety..................................... 4
1.1 General instructions ..................... 4
9 Programs .............................. 26
9.1 Automatic programs .... 26
9.2 Time programs....................... 271.2 Destination of the
device .............................................. 4
1.3 Restriction of Users ..... 4
1.4 Secure Installation.............................. 5
1.5 Safer use ..................................... 7
10 Accessories.............................. 29
11 Laundry ............................... 30
11.1 Preparing laundry......... 30
1.6 Safe cleaning and
maintenance .............................................. 10 12 Essentials of the Operation....................... 30
12.1 Switching on the device.............. 30
12.2 Set program ..................... 30
2 Avoiding Property Damage ..... 11
3 Environmental protection and
ring..................................... 11
12.3 Loading the drum with
laundry ................................... 30
3.1 Disposing of the packaging ... 11
3.2 Saving energy ..................... 11
3.3 Energy Saving Mode ....... 12
12.4 Starting the program .. 30
12.5 Adding laundry ..................... 31
12.6 Program cancel ..................... 31
12.7 Taking out laundry ............... 31
12.8 Switching off the device .............. 31
12.9 Lint filter ............................ 31
12.10 Condensed water container ....... 33
4 Set up and connection ..................... 12
4.1 Unpacking the device ..................... 12
4.2 Scope of delivery ..................... 12
4.3 Installation site
requirements .............................................. 13 13 Child Lock ................................ 34
13.1 Activating Child Lock ..................... 34
13.2 Deactivating the child lock .............. 34
4.4 Water drain hose....................... 13
4.5 Adjusting the appliance ..................... 16
4.6 Connecting the device
electrically................................................ 16 14 Basic settings ..................... 35
14.1 Overview of the basic
settings .............................. 35
5 Getting to know your device........ 17
5.1 Device ....................................... 17
5.2 Control panel ..................... 18
14.2 Change basic settings...... 36
15 Device care ..................... 36
6 Display ....................................... 19
7 Buttons .................................... 22
15.1 Preparing device
care .............................................. 36
15.2 Calling up device
care .............................................. 37
8 Drying target ................................... 25
8.1 Change dryness target................. 25
8.2 Adjust dryness target.................. 25
2

NL
15.3 Carrying out simple device
care ..................... 37
15.4 Perform intensive device
care..................................... 38
16 Cleaning and maintenance .............. 39
16.1 Tips for cleaning and
maintenance................................ 39
16.2 Humidity sensor ............... 39
16.3 Filter of the condensed water
container ..................... 40
17 Troubleshooting ..................... 41
18 Transporting, storing and
disposal................................... 46
18.1 Preparing the device for
transport ......................... 46
18.2 Disposal of your old
appliance .............................................. 46
19 After-sales service......................... 47
19.1 Product number (E no.) and production
number (FD) ..................... 47
20 Consumption values ..................... 48
21 Technical data ..................... 49
3

NLSafety
1 Safety
Please observe the following safety instructions.
1.1 General instructions
¡Read this manual carefully.
¡Keep the operating instructions and product information for future reference
for use or for subsequent owners.
¡Do not connect the device in case of transport damage.
1.2 Destination of the device
Only use the device:
¡for tumble-drying and water-washed textiles
dry and refresh.
¡for domestic use and in enclosed spaces within the home
sable environment.
¡up to an altitude of 4000 m above sea level.
1.3 Restriction of Users
This appliance can be operated by children aged from 8 years and
above and by persons with reduced physical, sensory or mental
capabilities or lack of experience and/or knowledge if they are
supervised or have been instructed in the safe use of the appliance
and understand the resulting hazards. understood. Children must
not play with the appliance.
Cleaning and user maintenance must not be made by children
unless they are supervised.
Make sure that children up to the age of 3 and pets cannot reach
the device.
4

SafetyNL
1.4 Secure installation
WARNING ‒ Risk of electric shock! Improper
installations are dangerous.
▶Only connect and operate the device in accordance with the
information on the rating plate.
▶Only connect the device to an alternating current mains via a
properly installed socket with earthing contact.
▶The protective earthing system of the domestic electrical installation
must be installed in accordance with the electrotechnical regulations.
The installation must have a sufficiently large conductor diameter.
▶When using an earth leakage circuit breaker, only use a type
with the mark.
▶Never power the device through an external switching device,
e.g. a time switch or remote control.
▶Never connect the device to a circuit that is regularly switched on
and off by the utility company.
▶When the device is installed, the mains plug of the mains connection
cable must be freely accessible, or if free access is not possible, an
all-pole disconnection device must be installed in the permanently
installed electrical installation in accordance with the installation
instructions.
▶When setting up the device, make sure that the mains cable is
not pinched or damaged.
Damaged insulation of the power cord is dangerous.
▶Never bring the power cord into contact with hot device parts or
heat sources.
▶Never bring the power cord into contact with sharp points or
edges.
▶Never kink, crush or modify the power cord.
WARNING ‒ Risk of fire!
Using an extended power cord and unauthorized adapters is
dangerous.
▶Do not use extension cords or multiple sockets.
5

NLSafety
▶Only use adapters and power cords approved by the
manufacturer.
▶If the power cord is too short and a longer power cord is not
available, contact an electrical retailer to adjust the home
installation.
WARNING ‒ Risk of injury!
The heavy weight of the device can cause injuries when lifting it.
▶Do not lift the device alone.
If this appliance is improperly installed in a washer-dryer stack,
the installed appliance may fall down.
▶Only stack the dryer on a washing machine with the connection kit
from the dryer manufacturer
→ "Accessories", page 29 No other placement method is
allowed.
▶Do not install the appliance in a washer-dryer stack if the dryer
manufacturer does not offer a suitable connection set.
▶Do not install appliances from different manufacturers and with
different depths and widths in a washer-dryer stack.
▶Do not set up a washer-dryer stack on a platform, the appliances
could tip over.
WARNING ‒ Risk of suffocation!
Children can pull packaging material over their heads and become
entangled and suffocated.
▶Keep packaging material away from children.
▶Do not let children play with packaging material.
CAUTION ‒ Risk of injury!
The device may vibrate or move during operation.
▶Set up the device on a clean, flat and firm surface.
▶Level the device using the device feet and a spirit level.
6

SafetyNL
There is a tripping hazard if hoses and mains connection cables are
laid incorrectly.
▶Lay the hoses and connecting cables in such a way that they cannot
be tripped over.
If the appliance is moved by protruding parts, such as the loading
door, the parts may break off.
▶Do not move the device by protruding parts.
CAUTION ‒ Risk of cutting!
Sharp edges on the device can lead to cuts when touched.
▶Do not touch the device on sharp edges.
▶Use protective gloves when installing and transporting the
device.
1.5 Safer Use
WARNING ‒ Risk of electric shock!
A damaged device or power cord is dangerous.
▶Never use a damaged device.
▶Never pull on the power cord to disconnect the device from the
power supply. Always pull the plug on the power cord.
▶If the appliance or the power cord is damaged, immediately
unplug the power cord or switch off the fuse in the fuse box.
▶Contact the service department. → Page 47 Penetrating
moisture can cause an electric shock.
▶Only use the device in closed rooms.
▶Never expose the device to excessive heat and humidity.
▶Do not use a steam cleaner, high-pressure cleaner, hoses or
sprayers to clean the appliance.
7

NLSafety
WARNING ‒ Risk of health hazard! Children can lock
themselves in the appliance and endanger their lives.
▶Do not install the device behind a door that blocks or prevents
the opening of the device door.
▶In the case of discarded appliances, unplug the mains cable, then
cut the mains cable and damage the appliance door lock to such
an extent that the appliance door no longer closes.
WARNING ‒ Risk of suffocation!
Children can inhale or swallow small parts and suffocate.
▶Keep small parts away from children.
▶Do not let children play with small parts.
WARNING ‒ Risk of explosion!
Coal dust or flour in the vicinity of the device can lead to
explosions.
▶Keep the area around the device clean during use.
WARNING ‒ Risk of poisoning!
The condensed water from this device is not drinking water and may be
contaminated with fluff.
▶Do not drink or further use the condensed water from the
device.
Washing and care products can lead to poisoning if ingested.
▶In case of accidental ingestion, consult a doctor.
▶Keep detergents and care products out of the reach of children.
8

SafetyNL
WARNING ‒ Risk of fire!
The refrigerant R290 in this appliance is environmentally friendly
but flammable and may ignite on contact with open flames or
sources of ignition.
▶Keep open flames and other sources of ignition away
holding device.
WARNING ‒ Risk of explosion!
Residues in the fluff filter can ignite during drying.
▶Clean the fluff filter regularly.
Highly flammable objects, such as lighters or matches, may ignite
when drying.
▶Before drying, remove all flammable objects from the pockets
of the laundry.
If unwashed laundry has come into contact with solvents, oil, wax,
wax remover, paint, grease or stain remover, it may ignite when
drying.
▶Do not dry unwashed laundry in this appliance.
▶Before drying, rinse the laundry thoroughly with hot water and
detergent.
▶Do not use the appliance if the laundry has been previously
cleaned with industrial chemicals.
WARNING ‒ Risk of fire!
The laundry was not cooled sufficiently if the drying process was
stopped prematurely and could ignite.
▶Do not cancel the drying program prematurely.
▶Remove and spread out the laundry immediately if the drying process is
interrupted prematurely.
CAUTION ‒ Risk of injury!
The cover plate may break when climbing or scrambling on the
device.
▶Do not climb or scramble on the device.
9

NLSafety
The appliance can tip over when sitting or leaning on the open
door.
▶Do not sit or lean on the appliance door.
▶Do not place any objects on the appliance door.
Reaching into the rotating drum can lead to hand injuries.
▶Wait until the drum has come to a complete stop before reaching into the
drum with your hand.
1.6 Safe cleaning and maintenance
WARNING ‒ Risk of electric shock! Improper
repairs are dangerous.
▶Only trained specialist personnel may carry out repairs on the
device.
▶Only original spare parts may be used for repairing the device.
▶If the power cord of this appliance becomes damaged, it must
be replaced by the manufacturer, its service agent or a similarly
qualified person in order to avoid a hazard. Penetrating
moisture can cause a shock.
▶Do not use a steam cleaner, high-pressure cleaner, hoses or
sprayers to clean the appliance.
WARNING ‒ Risk of injury!
The use of non-original spare parts and accessories is dangerous.
▶Only use original spare parts and original accessories from the
manufacturer.
WARNING ‒ Risk of poisoning!
Toxic fumes may be produced when using cleaning agents
containing solvents.
▶Do not use cleaning agents containing solvents.
10

Avoid material damageNL
m2
avoid property damage ▶Do not use hard scouring or
washing-up sponges.
▶Only clean the device with water
and a soft, damp cloth.
▶In case of contact with the device,
immediately remove all detergent
residues, spray mist residues or residues.
material damage
avoid
Avoid material damage
NB!
An incorrect dosage of fabric
softeners, detergents, care products
and cleaning agents can affect the
operation of the appliance.
▶Follow the manufacturer's dosing
recommendations.
Exceeding the maximum load
quantity affects the operation of the
device.
▶Observe and do not exceed the
maximum load for each program.
→ "Programs", page 26
Overheating of the device can affect
the operation of the device.
▶Keep the ventilation opening on
the device clear during use.
▶Ensure adequate ventilation in
the room.
Light objects, such as hair and fluff,
can be sucked into the ventilation
opening of the device during
operation and affect the operation of
the device.
▶Keep the area clean while using
the device.
▶Keep light objects away from the
device.
Foam or foam rubber can deform or
melt when drying.
▶Do not dry any laundry
containing foam or foam rubber.
Unsuitable cleaning agents can
damage the surfaces of the device.
▶Do not use harsh or abrasive
cleaning agents.
▶Do not use cleaning agents
containing strong alcohol.
m3 Environmental protection and
savings
environmental protection and savings
Environmental protection and saving
3.1 Disposal of the packaging
The packaging materials are
environmentally friendly and can be
reused.
▶Dispose of the individual
components separately by type.
3.2 Saving energy
If you follow these instructions, your
device will use less power.
Use the device in a well-ventilated
room and keep the ventilation
opening of the device clear.
aA hindered air exchange
extends the program duration and
increases energy consumption.
Before drying, spin the laundry in
the washing machine.
aWetter laundry extends the
program duration and increases
energy consumption.
11

NLSet up and connect
Observe the maximum load capacity
of the programmes.
→ "Programs", page 26
→ "Disposing of the packaging",
Page 11
2.Check the device for visible
damage.
aExceeding the maximum
male load quantity extends the
program duration and increases
energy consumption.
3.Open the door.
4.Remove the accessories from the
drum.
5.Close the door.
After drying, clean the fluff filter →
Page 31 .4.2 Scope of Delivery
aA dirty fluff filter
reduces the airflow in the
appliance, extends the program
duration and increases energy
consumption.
After unpacking, check all parts for
transport damage and the
completeness of the delivery.
NB!
Use with incomplete or defective
accessories may impair the operation
of the device or cause material
damage and damage to the device.
▶Do not use the device with
incomplete or defective accessories.
▶Replace accessories before using
the device.
→ "Accessories", page 29
3.3 Energy Saving Mode
If you do not operate the device for a
longer period of time, the device
automatically switches to energy-
saving mode. All clues disappear and
Start/Refillflashes. The energy-saving
mode is exited when you operate the
device again.
Included in the Delivery
Description
O4 Set up and connect
set up and connect
Tumble dryer
Set up and connect
4.1 Unpack the device
NB!
Objects left in the drum that are not
intended for the use of the appliance
can lead to material and appliance
damage.
▶Remove all these objects and the
supplied accessories from the drum
before use.
Accompanying
documents
Water drain hose
with connection
adapter, confirm
ging material
and elbow.
→ "water drainage
feed hose",
Page 13
1.Remove packaging material and
complete protection of the device
ready.
12

Set up and connect NL
4.3 Installation site
requirements
Place of installation To demand
In a wash-
drying column
The device al-
borrow with the
original connection
set of the dry
ger manufacturer
a washer-dryer
set up column.
¡Connection set
with pull-out
work surface
→ Page 29
¡Connection set
→ Page 29
NB!
If the device is tilted more than 40°,
residual water can escape from the
device and cause material damage.
▶Carefully tilt the device.
▶Transport the device upright.
Freezing residual water in the device
can damage the device.
▶Do not place and use the device in
frost-sensitive places or outdoors.
If the device is used immediately after
transportation, the refrigerant in the
device may cause damage to the
device.
▶Immediately after transport, allow
the device to rest for two hours
before using it.
This device already
borrow on a washing
machine from the-
same manufacturer
places. The
depth and width
to of this device
must with
the measurements
of the washing machine
chinese match
man.
The washer-dryer column
do not place on
a platform.
Place of installation
On the floor
To demand
The device on
a clean, ef-
fen and fasten
place surface.
The device
set
→ Page 16 .
On a wall No hoses and
mains connection
between wall and
device clamp-
man.
4.4 Water drain hose
During drying, condensation water forms,
which your appliance collects in the
condensation water container. Ge-
13

NLSet up and connect
use the water drain hose to direct excess
condensation water directly into the
waste water.
1.Pull the condensed water hose
from the connection.
Comments
¡Use this device with the
supplied water drain hose.
→ "Connect the water drain hose",
page 14
If you connect the water drain hose, you
do not have to empty the condensed
water container regularly.
→ "Empty the condensed water
container", page 33
¡You can make this optional
→ "Accessories", page 29 order from
the service department.
The condensation water hose is connected
to the connection at the factory.
Remark:When removing the
condensate hose, liquid may
escape from the connection.
Connect water drain hose
If you do not wish to empty the
appliance's condensed water
container regularly, connect the water
drain hose.
2.Slide the condensed water hose
onto the holder.
NB!
When using the device without a
properly connected condensation
water hose or water drain hose, liquid
may leak from the connection piece.
▶Before using the device, properly
connect the condensation water
hose or the water drain hose.
Requirements
¡The device and accessories
are unpacked.
→ "Unpack the device", page 12
¡The device is on the set-up
place set up.
→ "Installation site
requirements", page 13
14

Set up and connectNL
3.Slide the water drain hose onto
the connection as far as it will go.
6.Insert the stopper into the recess
in the top.
7.Slide in the condensed water
container → Page 34 .
4.Empty the condensed water container
→ Page 33 .8.Connect the appliance to the
water outlet.
→ "Water outlet connection types",
page 15
Tip:To collect the condensed water
again in the condensed water
container, e.g. when the device is
moved to a different location, reverse
these steps in reverse order.
Water outlet connection types
5.Remove the stopper from the
bottom. NB!
If the drain is clogged or blocked,
accumulated waste water can flow
back into the device.
▶Before using the device, ensure
that the waste water flows away
quickly and remove blockages.
Drain into a
siphon.
The connection position
tie with one
hose clamp
(12-22 mm) Bore
gene.
The water
feeding hose with
a hose guide
thing at minimum
80 cm and max.
15

NL Set up and connect
times 100 cm
mounting height
gene.
4.5 Adjusting the device
To reduce noise and vibration, place
the device horizontally.
▶To adjust the device, turn the device
feet. Check the horizontal
adjustment of the device with a
spirit level.
Remark:Of
the Y divider
→ Page 29
you can remove the
water drain hose from
an additional device
rate like eg.
a washing machine
on the same
connect feed from
the siphon.
Drain in one
sink.
The water
feed hose com-
crush through the
bend
→ Page 12
slide and with
the confirmation
material securing
ten.
Up the bend
maximum 100
cm height
settle.
All device feet must be firmly on the
floor.
4.6 Connecting the appliance
electrically
1.Insert the mains plug of the
appliance's connecting cable into
a socket in the vicinity of the
appliance.
Drain in one
ditch.
The water
feed hose com-
crush through the
bend
→ Page 12
slide and with
the confirmation
material securing
ten.
The bend on the
gutter fix.
The connection data for the device
can be found in the technical data
→ Page 49 .
2.Check the mains plug for tightness.
16

Get to know your deviceNL
YOU5 Get to know your device
get to know your device
Get to know your device
5.1 Device
Here you will find an overview of the components of your device.
5
4
3
2
1
Depending on the device type, details on the image may differ,
e.g. the color and shape.
an
1Vent
Lint filter → Page 31
Door
4Condensed water container
→ Page 33
25Control panel
→ Page 18
3
17

NLGet to know your device
5.2 Control panel
You can use the control panel to set all the functions of your device and obtain
information about the operating status.
2 3 4
1 1
4
1Programs →
Page 26
2Program selector
→ Page 30
3Display →
Page 19
Buttons → Page 22
4
18

displayNL
D6
isplay
display
DO
isplay
On the display you can see the current set values, options or instructions.
sing lyrics.
indication
0:401
Description
Expected program duration or remaining time of the
program in hours and minutes.
1:25
9.01
0:451
Time program is set.
→ "Time programs", page 27
Recommendation of the maximum load quantity for the set
program in kg.
Program end time
→ "Buttons", page 24
¡lights up: the childproof lock is activated.
¡flashes: the child lock is activated and the appliance
was served.
→ "Deactivate childproof lock", page 34
(Start/Refill) Start, cancel or pause
¡lights up: The program is running and can be canceled
know or paused.
¡flashing: the program can be started or resumed.
(iron dry)
(cupboard dry)
1Example
The dry oe is activated.
→ "Buttons", page 23
d l
O i
The drying target is activated.
→ "Button n" a after 23e , P gi
19

NLdisplay
indication Description
(Cupboard dry
plus)
The drying target is activated.
→ "Buttons", page 22
+ 1
+ 2
+ 3
The custom drying target is activated.
→ "Drying target", page 25
(Anti wrinkle) The anti-crease function is activated.
→ "Buttons", page 23
(gentle drying) Gentle drying for sensitive textiles is activated.
→ "Buttons", page 24
4.5 kg (Half
load)
The half load quantity is activated.
→ "Buttons", page 24
(Silent mode) Silent drying without sound signals is activated.
→ "Buttons", page 24
Empty and insert the condensed water container.
→ "Empty the condensed water container", page 33
Clean the lint filter.
→ "Clean the fluff filter", Page 31
CrE Run routine device maintenance program.
→ "Device care", page 36
Hot The cooling down process cools the laundry for a few
minutes with the drum rotating to avoid damage to the
laundry. The cooling process can be canceled by opening
the door.
Remark:Do not change the set program.
The automatic self-cleaning rinses the heat exchanger of
the appliance.
Remark:Do not remove the condensed water container and
do not cancel the programme.
To dry
Program status
Drying target iron dry
Program status
Drying target cupboard dry
Program status
Anti wrinkle
Program status
(Start/Refill) Pause
Program status
1Example
20