10
4.Use the @or Abutton to set the cooking time.
■Default value for the @button = 30 minutes
■Default value for the Abutton = 10 minutes
The main oven will start up after a few seconds. The cooking
time counts down in the display and the [r] symbol lights
up. The other time symbols go out.
The cooking time has elapsed
A signal sounds. The main oven stops heating. 00:00 is shown
in the display. Press the 0button. The @or Abuttons can be
used to set a new cooking time. Or press the 0button twice
and turn the function and temperature selector to the off
position. The main oven is switched off.
Changing the cooking time
Use the @or Abutton to change the cooking time. After a few
seconds, the change is adopted. If the timer has been set,
press the 0button beforehand.
Cancelling the cooking time
Use the Abutton to reset the cooking time to 00:00. After a few
seconds, the change is adopted. The cooking time is
cancelled. If the timer has been set, press the 0button
beforehand.
Checking the time settings
If several time-setting options are set, the relevant symbols are
illuminated on the display. The symbol for the time-setting
option that is visible in the display is shown in brackets.
To call up the Utimer, rcooking time, pend time or 0
clock, press the 0button repeatedly until the brackets are
around the relevant symbol. The display shows the value for a
few seconds.
End time
You can change the time at which you wish your dish to be
ready. The ómain oven starts automatically and finishes at the
desired time. You can, for example, put your dish in the
cooking compartment in the morning and set the cooking time
so that it is ready at lunch time.
Ensure that food is not left in the cooking compartment for too
long as it may spoil.
Example shown below: It is 10:30 , the cooking time is
45 minutes and you want the oven to finish cooking at 12:30.
1.Set the function selector for the main oven.
2.Set the temperature selector for the main oven.
3.Press the 0button twice.
4.Use the @or Abutton to set the cooking time.
5.Press the 0button. The brackets are around p. The time
when the dish will be ready is displayed.
6.Use the @or Abutton to delay the end time.
After a few seconds, the oven adopts the settings and
switches to standby. The display shows the time at which the
dish will be ready and the psymbol is in brackets. The
symbols Uand 0go out. When the oven starts, the cooking
time counts down in the display and the rsymbol is shown
in brackets. The psymbol goes out.
The cooking time has elapsed
A signal sounds. The main oven stops heating. 00:00 is shown
in the display. Press the 0button. The @or Abuttons can be
used to set a new cooking time. Or press the 0button twice
and turn the function and temperature selector to the off
position. The main oven is switched off.
Changing the end time
Use the @or Abutton to change the end time. After a few
seconds, the change is adopted. If the timer has been set, first
press the 0button twice. Do not change the end time if the
cooking time has already started to elapse. The cooking result
would no longer be correct.
Cancelling the end time
Use the Abutton to set the end time back to the current time.
After a few seconds, the change is adopted. The main oven
starts. If the timer has been set, first press the 0button twice.
Checking the time settings
If several time-setting options are set, the relevant symbols are
illuminated on the display. The symbol for the time-setting
option that is visible in the display is shown in brackets.
To call up the Utimer, rcooking time, pend time or 0
clock, press the 0button repeatedly until the brackets are
around the relevant symbol. The display shows the value for a
few seconds.