Bosch Programme Table User manual

1 2 3 4 5 6
D- 90 °C VTemp. °C Select the temperature (D= cold)
1 - 24h Ready in Programme end after
- 1200* crpm Selectt he spin speed (*depending on the model) or (with no final spin, la undry
soaks in the last rinsing water, display - - -)
Status displays Programme sequence displays:
1ü2üücü-0- Wash, rinse, spin, p rogramme duration or end (-0-)
(Childproof lock apage 5
Open the washing mach ine door, reload laundry apage 4, 5
End of programme when ...
... $Start/Reload flashes and -0- appea rs on the display
panel.
Interrupting the programme
Programmes at high temper atures:
– Cool was hing: Choose 2Rinse.
– Press $Start/Reloa d.
Programmes at lower tempera tures:
– Choose cSpin or >D rain.
– Press $Start/Reloa d.
Changing the programme, if ...
... you have selected the wrong progra mme by mistake:
– Reselect the programme.
– Press $Start/Reload. The new programme starts from
the beginning.
Reloading laundry, if ... apage 5
... Press $Start/Reload, both the symbols YES and +are lit in the display panel . If NO is lit, the washing machine
door cannot be opened.
– Press $Start/Reloa d.
Correct installation according to the
separate Installation instructions.
Checking the machine
– Never use a dama ged machine.
– Inform customer ser vice.
Connecting the mains
plug
Make sure your hands are dry .
Take hold of the plug only.
Turning the tap on
Compartment II: Detergent for the m ain wash, water
softener, bleach, stain remover
Sorting and loading laundry
Follow the manufacturer's c are information.
According to the informatio n on the care labels.
According to type, colour, soiling and temp erature.
Do not exceed the max imum load apage 7.
Observe the important information apage 6.
Insert large and small items of laund ry.
Close the washing machine door. Ta ke care not to trap items of laun dry
between the washing machine doo r and the rubber seal.
Add detergent and care products
Measure accordingly:
Amount of laundry, soiling, water har dness (ask your water supply
company) and manufacture r's instructions.
Pour liquid detergent into the appropriate dispenser and place in the drum.
Your washing machine
Congratulations äYou have o pted for a modern, high- quality
domestic appliance manu factured by Bosch. The washing machine
is distinguished by its ec onomical water- and energy consumption.
Each machine that leav es our factory has been inspected thorough ly
to ensure that it functio ns properly and is in p erfect condition.
Further information: www.bosch-hom e.com
You can find the contact details for your nearest after-sale s service
here or in the after-sales service di rectory (depending on model).
GB 0844 8928979
Calls from a BT landline will be charged at up t o 3 pence per
minute. A call set-up fee of up to 6 p ence may apply.
IE 01450 2655
Environmentally friendly waste dispos al All packaging must be disposed of in accordance with
environmental guidelines.
This appliance is certified in accorda nce with European Direct ive
2002/96/EEC on waste electrical an d electronic equipment
(WEEE).
This directive provides the framework for the EU-wide collection and
reuse of used appliances.
Intended use
Contents Page
ʋIntended use ................................................................................ .......1
ʋProgrammes ........................................................................................ 1
ʋSetting and adjusting the programme ...........................................3
ʋWashing ........................................................................................... 3/4
ʋAfter washing ...................................................................................... 4
ʋIndividual settings .................................... ......................................5/6
ʋImportant information ........................ ............................................... 6
ʋOverview of programmes ........................................ ........................7
ʋSafety instructions ............................................................................. 8
ʋConsumption values ......................................................................... 8
ʋCare ................................................................................................. ....9
ʋInformation on the display panel .................................................... 9
ʋMaintenance .................................................................................... 10
ʋWhat to do if... . ................................................................................. 11
Protection of the environment/Conservation tips
– Always fill the washing m achine with a maxim um amount of
laundry for the relevant pr ogramme.
– Wash normally s oiled laundry without a pre -wash.
– Instead of LFCottons 90 °C, choose the pro gramme
LFCottons 60 °C with the addition al function jEcoPerfect.
Comparable cleaning resu lt with significantly lower e nergy
consumption.
– Measure the d etergent according to the m anufacturer's
instructions and water hardness .
– If the laundry is the n dried in the tumble dryer, select th e spin
speed according to t he instructions of the dryer manufac turer.
Preparation Before washing for the first time
Wash once without any laundry ap age 9.
Setting** and adjusting programmes
Display panel /
options buttons
Programme selectorStart/Reload
Programme selector for
switching the machine on
and off and for selecting
the programme. Can be
turned in either direction.
Programmes
Detailed overview of programmes apa ge 7.
Temperature and spin speed c an be selected individually,
irrespective of the selected p rogramme and programme
progress.
LFCotton s Hard-wearing fabrics
+ Prewash Hard-wearing fabrics, pre-wash at 3 0 °C
IEasy-Care Easy-care fabrics
+ Prewash Easy-care fabrics, pre-wash at 30 °C
/Mixed Load Different types of laundry
cDelicate/Silk Delicate washable fabrics
:/ Wool Hand/machine-washable wool
2Rinse With subsequent spin
cSpin Laundry washed by hand
>Drain Drain rinsing wa ter for c(without final spin)
cGentle Spin Laundry washed by hand with a reduced spin
speed
@Super Quick 15’ Short programme
VSensitive Hard-wearing fabrics
ZSportswear Fabrics made from microfibr e
KDark Wash Dark-coloured fabrics
**If the (symbol flashes in the
display panel, the childpro of lock
is active adeactivate, page 5.
Additional functions and o ptions
buttons aIndividual settings,
page 5.
Press $  Start/Reload
Washing
1
2
Washing
Detergent drawer with
compartments I,II,~Washing machine
door
Compartment 0: Fabric softener, starch
Compartment I: Detergent fo r pre-wash
ʋfor domestic use only,
ʋfor washing machine-wash able fabrics and hand-
washable wool in deterge nt solution,
ʋto be operated with cold dr inking water and commer-
cially available detergents and ca re products which are
suitable for use in washing m achines.
.
– Do not lea ve children unattended near the
washing machine.
– T he washing machine is not to be used by
children or persons n ot familiar with the
operating instructions.
– Ke ep pets away from th e washing machine.
Read these instructions and th e separate
installation instructions before op erating the
washing machine.
Dilute viscous fabric softener a nd fabric conditioner with water .
This prevents blockages.
Individual settings
ʑOptions buttons
You can change the spin sp eed and the temperature before the selected progra mme starts
and while it is running. The effects dep end on the programme progress.
ʑVTemperature °C
You can change the displayed washing temperature. The maximum selectable tempera ture
depends on the current programm e.
ʑReady in
When you select the programm e, the relevant programme duration is disp layed. You can
delay the start of the program me before it begins. The Re ady in- time can be set in
increments of one hour up to a maximum of 24 hours. Press the Ready in butto n
repeatedly until the required number of hours is displa yed (h = hour).
Choose $Start/Reload.
ʑrpm (spin speed / without final s pin)
You can change the d isplayed spin speed. The m aximum selectable spin speed depends on
the model and on whic h programme is currently selec ted.
ʑAdditional functions aand overview of progra mmes, see page 7
ĈSpeedPerfect For washing in a shorter time with a w ashing outcome comparable to
that of the standard p rogramme. Maximum load aO verview of
programmes, page 7.
ćEcoPerfect For saving energy with a washing performance comparable to that of
the standard programme.
SReduced Ironing Special spin s equence with subsequent fluffing. More gentle final spin
- residual moisture in th e laundry slightly increased.
=Aqua Plus Increased water level and addi tional rinse cycle, extended washing
time. For areas with very soft wa ter or for further enhancing the spin
result.
ʑChildproof lock and re loading
(Childproof lock/
Appliance lock
You can lock the w ashing machine to prevent the func tions you have
set from being changed inadvert ently.
ON/OFF: Press and hold t he $Start/Reload button for 5 seconds after
the start/end of the program me.
Note: The childproo f lock can remain activa ted until you wish to s tart
the next programme , even after switching off the m achine.
Then you can de activate the childproof lo ck before the start o f the
programme and activate it again as necessary on ce the programme
has started.
YES +oReload
If you want to add additional items of laun dry after the programme ha s
started, choose $S tart/Reload. The machine c hecks whether
reloading is possible.
YES + illuminated: Relo ading is possible.
NO flashes: wait until YES + light up.
Note: do not open the doo r until both the YES + symbols are lit.
NO: It is not possible to reload.
Note: For safety reasons, the washing mach ine door remains locked
when the water level and/or temperat ure is high, or during spinning.
To continue the program me, press the $S tart/Reload button.
ʑ$Start/Reload
To start the programme or to subsequently load a dditional laundry, and to activate/deactivate
the childproof lock.
Individual settings
ʑSignal
Important information
Protecting the laundr y and the machine
– When dete rmining the dosage of all washing powde rs, additives and cleaning a gents, you
must follow the manufacturer's instruction s.
– Empty pockets.
– Look out for metal ite ms (paperclips, etc.).
– Wash delica tes in a laundry bag (tig hts, curtains, underwired bras).
– Fasten zips, do up an y buttons.
– Brush sand o ut of pockets and collars.
– Remove curtain fi ttings or place in the laundry bag .
Laundry with varying degrees o f soiling
Wash new items of c lothing separately.
light Do not pre-wash. If required, choose the add itional function
iSpeedPerfect.
Pre-treat any stains as nece ssary.
intense Do not load as much laundry.
Choose a programme with a prewa sh.
Soaking Load laund ry of the same colour
Pour soaking agent/deterge nt into compartment II in accordance with th e manufacturer's
instructions. Turn the pr ogramme selector to LFCottons 30 °C and press $S tart/Reload.
After approx. 10 minutes, press $Start/Reload to pause the programme. Once the required
soaking time has elaps ed, press $Start/Reload again to c ontinue the programme, or select
a different programme .
Starch Laundry should n ot be treated with fab ric softener.
Starching is possible in all w ash programmes if liquid star ch is used. Pour the starch i n
accordance with the manufacturer's instructions into fabric softener compartment ~( rinse first
if necessary).
Dyeing/Bleaching
Dye should only be used in normal household quantities. Salt may damage stainless steel.
Always follow the dye ma nufacturer's instructions! Do no t use the washing machine for
bleaching clothes!
2. Setting the
volume for ...
1. Activating the mode
for setting the signal
volume
Set to •1 step, the
display panel
lights up
press and hold+1 step, release
Button signals Information signals
Set to •
Setting the
volume*
Setting the
volume*
1 step
direct
* you may need to s elect
the function several times.
All buttons are sensitive an d need
only to be touched lightly. If the
buttons are held for longer , the
appliance automatically runs
through the setting option s.
Additional
functions
3
Drum
Control panel
Service flap
Removing the washing
Open the washing machine door and remove the washing.
If (without final spin) is active: Turn programme selector
to >Drain or select the spin speed.
Choose $Start/Reload.
– Remove any foreign ob jects - risk of rusting.
– Leave the washing machine door and detergent
drawer open so that any residu al water can
evaporate.
Turning the tap off
Not required for Aqua-Stop models aRefer to installation
instructions
Switching off
Turn the programme selector to Off.

7
Overview of Programmes aRefer to the table o f consumption values o n page 8 and notes on p age 6.
Programmes °C max. Type of laundry Additional functions; information
LFCottons D- 90 °C
7 kg/ 4 kg*
Hard-wearing fabrics, heat-resistant fabrics made of cotton or linen ĈSpeedPerfect*, ćEcoPerfect, SReduced Ironing, =Aqua Plus
+ Prewash VSensitive D- 60 °C Hard -wearing fabrics made of cotton or linen
ĈSpeedPerfect*, ćEcoPerfect, SReduced Ironing , =Aqua Plus;
for particularly sensitive skin, longer wash cycle at selec tedtempe rature, higher water level, additional rin se cycle
IEasy-Care D- 60 °C
3 kg
Easy-care fabrics made of cotton, linen, synthetic fibres or blended fabrics ĈSpeedPerfect, ćEcoPerfect, SReduced Ironing, =Aqua Plus
+ Prewash /Mixed Load D- 40 °C Fabr ics made of cotton or easy-care fabrics ĈSpeedPerfect, ćEcoPerfect, SReduced Iron ing, =Aqua Plus;
different types of laundry can be washed together
KDark Wash D-40 °C Dark-coloured fabrics made of cotton and dark easy-
care fabrics
ĈSpeedPerfect, ćEcoPerfect, SReduced Ironing, =Aqua Plus;
Reduced rinse and final s pin cycle
cDelicate/Silk D- 40 °C
2 kg
For delicate, washable fabrics, e.g. made of silk, satin, synthetic fibres or blended fabrics (e.g. curtains)
ĈSpeedPerfect, ćEcoPerfect, SReduced Ironing, =Aqua Plus;
No spin between ri nse cycles
:/ Wool D- 40 °C Handäor ma chine-washable fabrics made of wool or
containing wool
Particularly gentle wash prog ramme to avoid shrinkage of laundry, longer programme breaks (fabr ics rest in the detergent solution)
@Super Quick 15’ D-4 0 °C Easy-care fabrics made of cotton, linen, synthetic fibres
or blended fabrics
Short programme, approx. 15 mi nutes, suitable for lightly soiled laundry
ZSportswear D- 40 °C Fa brics made from microfibre ĈSpeedPerfect, ćEcoPerfect, SReduced Ironing, =Aqua Plus Additional programmes 2Rinse, Spin, >Drain, Gentle Spin
*Reduced load for additional ĈSpeedPerf ect function.
As a short programme, /Mixed Load 40 °C,with a maximum spin speed, is ideal.
Programmes without pre-was h - add detergent to compartmen t II, programmes with pre-wash - distribute the detergent between compartments Iand II.
9209 / 9000660359 *660359* WAE244B1GB ...
Robert Bosch Hausgeräte Gm bH
Carl-Wery-Str. 34
81739 München / Germa ny
8
Safety instructions
– Read the i nstruction manual and installation instructions and all other information enclosed with the w ashing
machine and act accordingly.
– Retain the documents for subsequent use.
Risk of electric s hock – N ever pull the cable to disconnect the mains plug.
– N ever insert/disconnect the mains plug with damp hands.
Danger to life For worn-out appliances:
– D isconnect the mains plug.
– S everth e mains cable and discard along with the plug.
– D estroy the lock on the washing machine door. This will prevent children from
locking themselves in and risking their lives.
Danger of suffocation – Keep packaging, film and packaging parts o uto f the reach of children.
Risk of poisoning – Keep detergents and care produ ctso ut of the reach of children.
Risk of explosion – Items of laundry pretrea ted with cleaning agents containing solvents, e.g. stain
remover / cleaning solvent may lead to an explosion after bei ng loaded into the
washing machine.
Rinse items of laundry thoroughly by hand beforehand.
Risk of injury – The washing machine door can become very hot.
– B e careful when draining hot detergent solution.
– D o not climb onto the washing machine.
– D on ot lean on the open washing machine door.
– D o not reach into the drum if it i s still rotating.
– B e careful when opening the detergent drawer while the machin e is in operation.
Consumption values depending on model
Programme Load Electricity*** Water*** Programme
duration***
LFCottons 30 °C* 7 kg 0,55 kWh 60 l 02:36h
LFCottons 40 °C* 7 kg 0,69 kWh 60 l 02:36h
LFCottons60 °C* 7 kg 1,33 kWh 60 l 02:41 h
LFCottons 90 °C 7 kg 2,00 kWh 64 l 02:48h
Easy-Care 40 °C* 3 kg 0,55 kWh 55 l 01:37 h
/Mixed Load 40 °C 3 kg 0,48 kWh 32 l 01:03 h
cDelicate/Silk 30 °C 2 kg 0,21 kWh 31 l 00:41 h
:ü/Wool 30 °C 2 kg 0,19 kWh 39 l 00:40 h
* Programme setting for testing in accordance with valid standa rdE N60456.
Note on comparative tests: For testing the test programmes, wash the specified load using the maximum spin speed.
Programme Additional function Load Annu al energy
consumption
Annual water
consumption
LFCottons40/60 °C ćEcoPerfect** 7/3,5 kg 19 7 kWh 10560 l
** Programme setting for testing and energy labelling in accordance wi thEU d irective 2010/30/EU with cold water (15 ºC).
*** The values deviate from the indicated values d epending on water pressure, hardness, and inlet temperature, a mbient tem-
perature, type, amount and soiling o f the laundry, detergent used, fluctuations in the powe r supply and selected additional
functions.
9
Care
Before washing for the first time
Do not load any laundry into the machine. Turn on the ta p. Add the following to compartment II:
– approx. 1 litre water
– detergent(do sage according to the manufacturer's instructions for light soiling and the appropriate degree of water
hardness)
Set the programme selector to IEasy-Care 60 °C and select $Start/R eload. At the end of th e programme, turn
the programme selector to O ff.
Machine housing, control panel
– Wipew ith a soft, damp cloth.
– Do not use any abrasive cloths, scourers or cleaning agents (stainless steel cleaners).
– Remove detergent and cleaning agent residue immediately.
– Do not clean with a jet of water.
Cleaning the detergent drawer and housing...
... if it contains detergent or fabric softener residues.
1. Pull the drawer out, p ress down the insert and fully remove the drawer from the housing.
2. To remove the in sert: press the insert upwards from below with your finger.
3. Clean the detergent dispenser tray an d insertw ith water and a brush and dry it. Also remove
any detergent or fabric softener r esidues in the housing.
4. Attach the insert an d engage (connect the cylinder to the guide pin).
5. Push in the detergent dr awer.
Leave the detergent drawer open so that any residu alw aterc an evaporate.
Washing drum and rubber seal
Wipe the inside of the rubb er seal dry with a cloth. Leave the w ashing machine door open so that the drum can dry out.
Rust stains - use chlorine-free c leaning agent, not steel wool.
Descaling Ensure th ere is no laundry in the machine
Descale the appliance accordin g to the descaler manufacturer's instructions. This should no t be necessary if the
correct dosage of detergent is used.
Emergency release, e.g. in the event of a p ower cut
The programme continues to run when the power has been resto red. However, if the laundry has to be r emoved, the
washing machine door can be ope ned as follows:
Risk of scalding.
The detergent solution and laundry may be hot. If possible, leave it to cool down. Do not reach
into the drum if it is still rotating. D o not open the washing machine door if water can be seen
through the glass.
1. Turn the programm e selector to Off and disconnect the mains plug .
2. Drain the detergent solution apage 10.
3. Pull the emergency release downwards with a tool and release.
Washing machine door can then be opened.
Information on the display panel depending on mo del
F: 16 Close the washing machine door pr operly; laundry may be caught.
F: 17 Open the tap completely, supply ho se kinked or trapped;
Clean the filter apage 10, Water pressu ret oo low.
F: 18 Detergent solution pump blocked; Clea n the detergent solution pump apage 10. Drainag e hose / waste pipe
blocked; Clean the drainage hose at the siphon apage 10.
F: 21 Motor fault. Call cu stomer services.
F: 23 Water in the base tub, appliance leaki ng.C all customer services.
–Risk of electric shock. Disconnect the mains plug.
–Risk of explosion. N o solvents.
10
Maintenance
Detergent solution pump
Turn the pr ogramme selector to Off an d disconnect the mains plug.
1. Open and remove the serv ice flap.
2. For models with a drainage hose: Remov e the drainage hose from
the retainer and pull it from th e housing.Remove the container.
Remove the sealing cap, al low the detergent solution to flow out.
Replace the sealing cap and place th e drainage hose in the retainer.
2* Formod els without a drainage hose: Carefully unscrew t he pump cover
until the detergent s olution begins to flow out.Whe n the service flap i s
half full, close the pump cover a nd empty the service flap. Repeat th e
above steps until all the de tergent solution has completel y drained out.
3. Carefully unscrew the pump cover (r esidual water).
4. Clean the interior, pump c over thread and pump housing (the impe ller in
the detergent solution pu mp must rotate).
5. Replace the pump cover and screw it tightly.
6. Place the service flap bac k on and close.
To prevent unused detergent from flowing stra ight into the drain during the next wash: Pour
1 litre of water in to compartment II and sta rt the >Drain programme.
Drainage hose at the siphon
Turn the programme selector to Off and disconnect the mains plug.
1. Loosen the hose clamp, carefully remove the drainage hose (residual water).
2. Clean the drainage hose and siphon connecting piece.
3.
Reattach the drainage hose and secure the connection with the hose clamp.
Filter in the water supply
Risk of electric shock
Do not immerse the H ydroSafe safety device i n water (contains an elec tric valve).
Reduce the water pressure in the sup ply hose:
1. Turn off the tap.
2. Select any programme (apar t from Spin / >Drain).
3. Choose $Start/Reload. L et the programme run for approxi mately 40
seconds.
4. Turn the programme selector to Off. D isconnect the mains plug.
Clean the filter:
1. Depending on model :
Disconnect the hose from the tap .
Clean the filter using a sma ll brush.
and/or for Standard and Aq ua-Secure models:
Remove the hose on the rea r of the appliance,
Remove the filter with plie rs and clean.
2. Connect the h ose and check for leaks.
–Risk of scalding.
Allow the detergent s olution to cool down.
– Turn off the tap.
11
What to do if ...
ʑWater is leaking ou t. – Attach/re place the drain age hose correctl y.
– Tighten the sc rew connecti on of the supply hose.
ʑNo wate r supply.
Detergent n ot
dispensed.
–$Start/Relo ad not selecte d?
– Tap not turn ed on?
– Filter blo cked? Clean th e filter apage 10.
– Supply ho se kinked or trap ped?
ʑWashing m achine door
cannot b e opened.
– Safet y function a ctive. Prog ramme sto pped? apage 4.
–(without fin al spin) se lected? apage 3 , 4.
– Can be op ened by emerge ncy release on ly? apage 9.
ʑProgramme do es not
start.
–$Start/Relo ad or Ready in tim e selected?
– Washin g machine doo r closed?
– Childp roof lock act ive? Deact ivate apage 5.
ʑDetergent solution is not
drained.
–(without fin al spin) se lected? apage 3 , 4.
– Clean th e detergent s olution pump apa ge 10.
– Clean the w aste pipe and/or dra inage hose.
ʑWater no t visible in the
drum.
– Not a fault - water b elow the visible are a.
ʑUnsatisfacto ry spin
result.
Laundry we t/too damp.
– Not a fau lt - the unbalanc ed-load detec tion system has c ancelled
the spin cycle beca use of uneven dis tribution of the laun dry.
Distribute smal l and large items of laundry evenly insi de the drum.
–SReduce d Ironing select ed? apage 5.
– Select ed speed too low ? apage 5.
ʑThe prog ramme
duration chang es
during the wa sh cycle.
– Not a fault – the prog ramme seque nce is optimised fo r the
particular wa sh process. This m ay result in cha nges to the
programme du ration in the display fie ld.
ʑSpin cycle per formed
several times .
– Not a fault - un balanced loa d detection syst em adjusts the
imbalance.
ʑResidual wa ter in the
compartm ent for care
products.
– Not a fault - t he action o f the care pr oduct is no t affected.
– Clea n the insert i f necessary apag e 9.
ʑOdour forma tion in the
washing ma chine.
– Run prog ramme LFCotton s 90 °C without laun dry. Use
standard deter gent.
ʑStatus display³1flashes. Foam m ay be
coming o ut of the
detergent dr awer.
– Too m uch deterge nt used? Mix 1 ta blespoon of fabric s oftener
with ½ litre of water and pour into d ispenser II (not for outdo or and
down-filled te xtiles!).
– Reduce th e detergent dos age for the next wash c ycle.
ʑIntense noise fo rmation,
vibrations an d
“wandering” d uring the
spin cycle.
– Are the appl iance feet fixed?
Secure the app liance feet aInstall ation instructio ns.
– Transpo rtation safet y devices remov ed? Remove th e
transportati on safety devic es aInstallation ins tructions.
ʑNoises duri ng spin and
drain cycles.
– Clean dete rgent-solut ion pump apage 10 .
ʑDisplay pane l/indicat or
lamps do no t function
during oper ation.
– Power cut ?
– Fuses trigg ered? Rese t/change the fu se.
– If the fau lt occurs rep eatedly, cal l customer servic es.
ʑProgramme se quence
longer than us ual.
– Not a fault - unba lanced loa d detection sys tem adjusts imba lance
by repeatedly d istributing the la undry.
– Not a fault - foam dete ction system act ive - adds an addition al
rinse cycle.
ʑDetergent r esidues
on the laundry.
– Occas ionally, phosph ate-free dete rgents conta in water-insol uble
residues.
– Use the 2Rin se cycle or brus h out the la undry after was hing.
If you cannot co rrect a fault yours elf (switching o n/off) or a repair is req uired:
– Turn the p rogramme sel ector to Off and r emove the mains plu g from the s ocket.
– Turn off t he water s upply an d call cus tomer servi ces aInstalla tion instructio ns.
Washing machine
en Instruction manu al

1 2
D- 90 °C VTemp. °C Select the temperature (D= cold)
1 - 24h Ready in Programme end after
- 1200* crpm Select the spin speed (*depending on the model) soaks in the last rinsing water, display - - -)
Status displays Programme sequence displays:
1ü2üücü-0- Wash, rinse, spin, programme duration or end (-0-)
(Childproof lock apage 5
Open the washing machine door, reload laundry a$2$c>$$a$$Correct installation according to the
separate Installation instructions.
Checking the machine
– Never use a damaged machine.
– Inform customer service.
Connecting the mains
plug
Make sure your hands are dry.
Take hold of the plug only.
Turning the tap on
Compartment II: Detergent for the main wash, water
softener, bleach, stain remover
aa
Close the washing machine door. Take care not to trap
Pour liquid detergent into the appropriate dispense
Your washing machine
Congratulations äYou have opted for a modern, high-quality
domestic appliance manufactured by Bosch. The washing machine
is distinguished by its economical water- and energy consumption.
Each machine that leaves our factory has been inspected thoroughly
to ensure that it functions properly and is in perfect condition.
Further information: www.bosch-home.com
You can find the contact details for your nearest after-sales service
here or in the after-sales service directory (depending on model).
GB 0844 8928979
Calls from a BT landline will be charged at up to 3 pence per
minute. A call set-up fee of up to 6 pence may apply.
IE 01450 2655
Environmentally friendly waste disposal All packaging must be disposed of in accordance with
environmental guidelines.
This appliance is certified in accordance with European Directive
2002/96/EEC on waste electrical and electronic equipment
(WEEE).
This directive provides the framework for the EU-wide collection and
reuse of used appliances.
Intended use
Contents Page
ʋIntended use .......................................................................................1
ʋProgrammes ........................................................................................1
ʋSetting and adjusting the programme ...........................................3
ʋWashing ...........................................................................................3/4
ʋAfter washing ......................................................................................4
ʋIndividual settings ..........................................................................5/6
ʋImportant information ....................................................................... 6
ʋOverview of programmes ................................................................ 7
ʋSafety instructions .............................................................................8
ʋConsumption values .........................................................................8
ʋCare .....................................................................................................9
ʋInformation on the display panel ....................................................9
ʋMaintenance .................................................................................... 10
ʋWhat to do if... .................................................................................. 11
Protection of the environment/Conservation tips
– Always fill the washing machine with a maximum amount of
laundry for the relevant programme.
– Wash normally soiled laundry without a pre-wash.
– Instead of LFCottons 90 °C, choose the programme
LFCottons 60 °C with the additional function jEcoPerfect.
Comparable cleaning result with significantly lower energy
consumption.
– Measure the detergent according to the manufacturer's
instructions and water hardness.
– If the laundry is then dried in the tumble dryer, select the spin
speed according to the instructions of the dryer manufacturer.
Preparation a
Display panel /
options buttons
Programme selectorStart/Reload
Programmes
Detailed overview of programmes apage 7.
Temperature and spin speed can be selected individually,
irrespective of the selected programme and programme
progress.
LFCottons Hard-wearing fabrics
+ Prewash Hard-wearing fabrics, pre-wash at 30 °C
IEasy-Care Easy-care fabrics
+ Prewash Easy-care fabrics, pre-wash at 30 °C
/Mixed Load Different types of laundry
cDelicate/Silk Delicate washable fabrics
:/ Wool Hand/machine-washable wool
2Rinse With subsequent spin
cSpin Laundry washed by hand
>Drain Drain rinsing water for c(without final spin)
cGentle Spin Laundry washed by hand with a reduced spin
speed
@Super Quick 15’ Short programme
VSensitive Hard-wearing fabrics
ZSportswear Fabrics made from microfibre
KDark Wash Dark-coloured fabrics (aa$

~
Compartment 0: Fabric softener, starch
Compartment I: Detergent for pre-wash
ʋfor domestic use only,
ʋfor washing machine-washable fabrics and hand-
washable wool in detergent solution,
ʋto be operated with cold drinking water and commer-
cially available detergents and care products which are
suitable for use in washing machines.
.
– Do not leave children unattended near the
washing machine.
– The washing machine is not to be used by
children or persons not familiar with the
operating instructions.
– Keep pets away from the washing machine.
Read these instructions and the separate
installation instructions before operating the
washing machine.
ʑʑVʑ$ʑʑaĈaćS=ʑ($o$$ʑ$ʑiLF$$$~
Additional
functions
>$a

3 4
DVDcrpm Select the spin speed (*depending on the model) or (with no final spin, laundry
soaks in the last rinsing water, display - - -)
1ü2üücüWash, rinse, spin, programme duration or end (-0-)
(aOpen the washing machine door, reload laundry apage 4, 5
End of programme when ...
... $Start/Reload flashes and -0- appears on the display
panel.
Interrupting the programme
Programmes at high temperatures:
– Cool washing: Choose 2Rinse.
– Press $Start/Reload.
Programmes at lower temperatures:
– Choose cSpin or >Drain.
– Press $Start/Reload.
Changing the programme, if ...
... you have selected the wrong programme by mistake:
– Reselect the programme.
– Press $Start/Reload. The new programme starts from
the beginning.
Reloading laundry, if ... apage 5
... Press $Start/Reload, both the symbols YES and +are lit in the display panel. If NO is lit, the washing machine
door cannot be opened.
– Press $Start/Reload.
Sorting and loading laundry
Follow the manufacturer's care information.
According to the information on the care labels.
According to type, colour, soiling and temperature.
Do not exceed the maximum load apage 7.
Observe the important information apage 6.
Insert large and small items of laundry.
Close the washing machine door. Take care not to trap items of laundry
between the washing machine door and the rubber seal.
Add detergent and care products
Measure accordingly:
Amount of laundry, soiling, water hardness (ask your water supply
company) and manufacturer's instructions.
Pour liquid detergent into the appropriate dispenser and place in the drum.
äʋʋʋʋʋʋʋʋʋʋʋʋʋʋLFLFjBefore washing for the first time
Wash once without any laundry apage 9.
Setting** and adjusting programmes
Programme selector
Programme selector for
switching the machine on
and off and for selecting
the programme. Can be
turned in either direction.
aLFI/c:2c>cc@VZK**If the (symbol flashes in the
display panel, the childproof lock
is active adeactivate, page 5.
Additional functions and options
buttons aIndividual settings,
page 5.
Press $  Start/Reload
Washing
1
2
Washing
Detergent drawer with
compartments I,II,~Washing machine
door
0ʋʋʋ
Dilute viscous fabric softener and fabric conditioner with water.
This prevents blockages.
ʑʑVʑ$ʑʑaĈaćS=ʑ($o$$ʑ$ʑiLF$$$~
All buttons are sensitive and need
only to be touched lightly. If the
buttons are held for longer, the
appliance automatically runs
through the setting options.
3
Drum
Control panel
Service flap
Removing the washing
Open the washing machine door and remove the washing.
If (without final spin) is active: Turn programme selector
to >Drain or select the spin speed.
Choose $Start/Reload.
– Remove any foreign objects - risk of rusting.
– Leave the washing machine door and detergent
drawer open so that any residual water can
evaporate.
Turning the tap off
Not required for Aqua-Stop models aRefer to installation
instructions
Switching off
Turn the programme selector to Off.

56
DVDc1ü2üücü
(aa$appears on the display
2$c>$$Reload. The new programme starts from
a$is lit, the washing machine
$aa
äʋʋʋʋʋʋʋʋʋʋʋʋʋʋLFLFjaaLFI/c:2c>cc@VZK(aa$

~0ʋʋʋIndividual settings
ʑOptions buttons
You can change the spin speed and the temperature before the selected programme starts
and while it is running. The effects depend on the programme progress.
ʑVTemperature °C
You can change the displayed washing temperature. The maximum selectable temperature
depends on the current programme.
ʑReady in
When you select the programme, the relevant programme duration is displayed. You can
delay the start of the programme before it begins. The Ready in- time can be set in
increments of one hour up to a maximum of 24 hours. Press the Ready in button
repeatedly until the required number of hours is displayed (h = hour).
Choose $Start/Reload.
ʑrpm (spin speed / without final spin)
You can change the displayed spin speed. The maximum selectable spin speed depends on
the model and on which programme is currently selected.
ʑAdditional functions aand overview of programmes, see page 7
ĈSpeedPerfect For washing in a shorter time with a washing outcome comparable to
that of the standard programme. Maximum load aOverview of
programmes, page 7.
ćEcoPerfect For saving energy with a washing performance comparable to that of
the standard programme.
SReduced Ironing Special spin sequence with subsequent fluffing. More gentle final spin
- residual moisture in the laundry slightly increased.
=Aqua Plus Increased water level and additional rinse cycle, extended washing
time. For areas with very soft water or for further enhancing the spin
result.
ʑChildproof lock and reloading
(Childproof lock/
Appliance lock
You can lock the washing machine to prevent the functions you have
set from being changed inadvertently.
ON/OFF: Press and hold the $Start/Reload button for 5 seconds after
the start/end of the programme.
Note: The childproof lock can remain activated until you wish to start
the next programme, even after switching off the machine.
Then you can deactivate the childproof lock before the start of the
programme and activate it again as necessary once the programme
has started.
YES +oReload
If you want to add additional items of laundry after the programme has
started, choose $Start/Reload. The machine checks whether
reloading is possible.
YES + illuminated: Reloading is possible.
NO flashes: wait until YES + light up.
Note: do not open the door until both the YES + symbols are lit.
NO: It is not possible to reload.
Note: For safety reasons, the washing machine door remains locked
when the water level and/or temperature is high, or during spinning.
To continue the programme, press the $Start/Reload button.
ʑ$Start/Reload
To start the programme or to subsequently load additional laundry, and to activate/deactivate
the childproof lock.
Individual settings
ʑSignal
Important information
Protecting the laundry and the machine
– When determining the dosage of all washing powders, additives and cleaning agents, you
must follow the manufacturer's instructions.
– Empty pockets.
– Look out for metal items (paperclips, etc.).
– Wash delicates in a laundry bag (tights, curtains, underwired bras).
– Fasten zips, do up any buttons.
– Brush sand out of pockets and collars.
– Remove curtain fittings or place in the laundry bag.
Laundry with varying degrees of soiling
Wash new items of clothing separately.
light Do not pre-wash. If required, choose the additional function
iSpeedPerfect.
Pre-treat any stains as necessary.
intense Do not load as much laundry.
Choose a programme with a prewash.
Soaking Load laundry of the same colour
Pour soaking agent/detergent into compartment II in accordance with the manufacturer's
instructions. Turn the programme selector to LFCottons 30 °C and press $Start/Reload.
After approx. 10 minutes, press $Start/Reload to pause the programme. Once the required
soaking time has elapsed, press $Start/Reload again to continue the programme, or select
a different programme.
Starch Laundry should not be treated with fabric softener.
Starching is possible in all wash programmes if liquid starch is used. Pour the starch in
accordance with the manufacturer's instructions into fabric softener compartment ~(rinse first
if necessary).
Dyeing/Bleaching
Dye should only be used in normal household quantities. Salt may damage stainless steel.
Always follow the dye manufacturer's instructions! Do not use the washing machine for
bleaching clothes!
2. Setting the
volume for ...
1. Activating the mode
for setting the signal
volume
Set to •1 step, the
display panel
lights up
press and hold+1 step, release
Button signals Information signals
Set to •
Setting the
volume*
Setting the
volume*
1 step
direct
* you may need to select
the function several times.
g.
ector
>$– Leave the washing machine door and detergent
aRefer to installation

7
Overview of Programmes aRefer to the table of consumption values on page 8 and notes on page 6.
Programmes °C max. Type of laundry Additional functions; information
LFCottons D- 90 °C
7 kg/ 4 kg*
Hard-wearing fabrics, heat-resistant fabrics made of cotton or linen ĈSpeedPerfect*, ćEcoPerfect, SReduced Ironing, =Aqua Plus
+ Prewash VSensitive D- 60 °C Hard-wearing fabrics made of cotton or linen
ĈSpeedPerfect*, ćEcoPerfect, SReduced Ironing, =Aqua Plus;
for particularly sensitive skin, longer wash cycle at selected temperature, higher water level, additional rinse cycle
IEasy-Care D- 60 °C
3 kg
Easy-care fabrics made of cotton, linen, synthetic fibres or blended fabrics ĈSpeedPerfect, ćEcoPerfect, SReduced Ironing, =Aqua Plus
+ Prewash /Mixed Load D- 40 °C Fabrics made of cotton or easy-care fabrics ĈSpeedPerfect, ćEcoPerfect, SReduced Ironing, =Aqua Plus;
different types of laundry can be washed together
KDark Wash D- 40 °C Dark-coloured fabrics made of cotton and dark easy-
care fabrics
ĈSpeedPerfect, ćEcoPerfect, SReduced Ironing, =Aqua Plus;
Reduced rinse and final spin cycle
cDelicate/Silk D- 40 °C
2 kg
For delicate, washable fabrics, e.g. made of silk, satin, synthetic fibres or blended fabrics (e.g. curtains)
ĈSpeedPerfect, ćEcoPerfect, SReduced Ironing, =Aqua Plus;
No spin between rinse cycles
:/ Wool D- 40 °C Handäor machine-washable fabrics made of wool or
containing wool
Particularly gentle wash programme to avoid shrinkage of laundry, longer programme breaks (fabrics rest in the detergent solution)
@Super Quick 15’ D- 40 °C Easy-care fabrics made of cotton, linen, synthetic fibres
or blended fabrics
Short programme, approx. 15 minutes, suitable for lightly soiled laundry
ZSportswear D- 40 °C Fabrics made from microfibre ĈSpeedPerfect, ćEcoPerfect, SReduced Ironing, =Aqua Plus Additional programmes 2Rinse, Spin, >Drain, Gentle Spin
*Reduced load for additional ĈSpeedPerfect function.
As a short programme, /Mixed Load 40 °C,with a maximum spin speed, is ideal.
Programmes without pre-wash - add detergent to compartment II, programmes with pre-wash - distribute the detergent between compartments Iand II.
9209 / 9000660359 *660359* WAE244B1GB ...
Robert Bosch Hausgeräte GmbH
Carl-Wery-Str. 34
81739 München / Germany
8
Safety instructions
– Read the instruction manual and installation instructions and all other information enclosed with the washing
machine and act accordingly.
– Retain the documents for subsequent use.
Risk of electric shock – Never pull the cable to disconnect the mains plug.
– Never insert/disconnect the mains plug with damp hands.
Danger to life For worn-out appliances:
– Disconnect the mains plug.
– Sever the mains cable and discard along with the plug.
– Destroy the lock on the washing machine door. This will prevent children from
locking themselves in and risking their lives.
Danger of suffocation – Keep packaging, film and packaging parts out of the reach of children.
Risk of poisoning – Keep detergents and care products out of the reach of children.
Risk of explosion – Items of laundry pretreated with cleaning agents containing solvents, e.g. stain
remover / cleaning solvent may lead to an explosion after being loaded into the
washing machine.
Rinse items of laundry thoroughly by hand beforehand.
Risk of injury – The washing machine door can become very hot.
– Be careful when draining hot detergent solution.
– Do not climb onto the washing machine.
– Do not lean on the open washing machine door.
– Do not reach into the drum if it is still rotating.
– Be careful when opening the detergent drawer while the machine is in operation.
Consumption values depending on model
Programme Load Electricity*** Water*** Programme
duration***
LFCottons 30 °C* 7 kg 0,55 kWh 60 l 02:36 h
LFCottons 40 °C* 7 kg 0,69 kWh 60 l 02:36 h
LFCottons60 °C* 7 kg 1,33 kWh 60 l 02:41 h
LFCottons 90 °C 7 kg 2,00 kWh 64 l 02:48 h
Easy-Care 40 °C* 3 kg 0,55 kWh 55 l 01:37 h
/Mixed Load 40 °C 3 kg 0,48 kWh 32 l 01:03 h
cDelicate/Silk 30 °C 2 kg 0,21 kWh 31 l 00:41 h
:ü/Wool 30 °C 2 kg 0,19 kWh 39 l 00:40 h
* Programme setting for testing in accordance with valid standard EN60456.
Note on comparative tests: For testing the test programmes, wash the specified load using the maximum spin speed.
Programme Additional function Load Annual energy
consumption
Annual water
consumption
LFCottons40/60 °C ćEcoPerfect** 7/3,5 kg 197 kWh 10560 l
** Programme setting for testing and energy labelling in accordance with EU directive 2010/30/EU with cold water (15 ºC).
*** The values deviate from the indicated values depending on water pressure, hardness, and inlet temperature, ambient tem-
perature, type, amount and soiling of the laundry, detergent used, fluctuations in the power supply and selected additional
functions.
I$aaaa
>>$ʑʑ$aʑaaaʑ$aʑaaʑʑSaaʑʑʑaʑLFʑ³1ʑaaʑaʑʑʑ2a

aLFDĈćS=VDĈćS=IDĈćS=/DĈćS=KDĈćS=cDĈćS=:Dä@DZDĈćS=2>Ĉ/
LFLFLFLF/c:ü
LFć
9
Care
Before washing for the first time
Do not load any laundry into the machine. Turn on the tap. Add the following to compartment II:
– approx. 1 litre water
– detergent (dosage according to the manufacturer's instructions for light soiling and the appropriate degree of water
hardness)
Set the programme selector to IEasy-Care 60 °C and select $Start/Reload. At the end of the programme, turn
the programme selector to Off.
Machine housing, control panel
– Wipe with a soft, damp cloth.
– Do not use any abrasive cloths, scourers or cleaning agents (stainless steel cleaners).
– Remove detergent and cleaning agent residue immediately.
– Do not clean with a jet of water.
Cleaning the detergent drawer and housing...
... if it contains detergent or fabric softener residues.
1. Pull the drawer out, press down the insert and fully remove the drawer from the housing.
2. To remove the insert: press the insert upwards from below with your finger.
3. Clean the detergent dispenser tray and insert with water and a brush and dry it. Also remove
any detergent or fabric softener residues in the housing.
4. Attach the insert and engage (connect the cylinder to the guide pin).
5. Push in the detergent drawer.
Leave the detergent drawer open so that any residual water can evaporate.
Washing drum and rubber seal
Wipe the inside of the rubber seal dry with a cloth. Leave the washing machine door open so that the drum can dry out.
Rust stains - use chlorine-free cleaning agent, not steel wool.
Descaling Ensure there is no laundry in the machine
Descale the appliance according to the descaler manufacturer's instructions. This should not be necessary if the
correct dosage of detergent is used.
Emergency release, e.g. in the event of a power cut
The programme continues to run when the power has been restored. However, if the laundry has to be removed, the
washing machine door can be opened as follows:
Risk of scalding.
The detergent solution and laundry may be hot. If possible, leave it to cool down. Do not reach
into the drum if it is still rotating. Do not open the washing machine door if water can be seen
through the glass.
1. Turn the programme selector to Off and disconnect the mains plug.
2. Drain the detergent solution apage 10.
3. Pull the emergency release downwards with a tool and release.
Washing machine door can then be opened.
Information on the display panel depending on model
F: 16 Close the washing machine door properly; laundry may be caught.
F: 17 Open the tap completely, supply hose kinked or trapped;
Clean the filter apage 10, Water pressure too low.
F: 18 Detergent solution pump blocked; Clean the detergent solution pump apage 10. Drainage hose / waste pipe
blocked; Clean the drainage hose at the siphon apage 10.
F: 21 Motor fault. Call customer services.
F: 23 Water in the base tub, appliance leaking. Call customer services.
–Risk of electric shock. Disconnect the mains plug.
–Risk of explosion. No solvents.
10
Maintenance
Detergent solution pump
Turn the programme selector to Off and disconnect the mains plug.
1. Open and remove the service flap.
2. For models with a drainage hose: Remove the drainage hose from
the retainer and pull it from the housing.Remove the container.
Remove the sealing cap, allow the detergent solution to flow out.
Replace the sealing cap and place the drainage hose in the retainer.
2* For models without a drainage hose: Carefully unscrew the pump cover
until the detergent solution begins to flow out.When the service flap is
half full, close the pump cover and empty the service flap. Repeat the
above steps until all the detergent solution has completely drained out.
3. Carefully unscrew the pump cover (residual water).
4. Clean the interior, pump cover thread and pump housing (the impeller in
the detergent solution pump must rotate).
5. Replace the pump cover and screw it tightly.
6. Place the service flap back on and close.
To prevent unused detergent from flowing straight into the drain during the next wash: Pour
1 litre of water into compartment II and start the >Drain programme.
Drainage hose at the siphon
Turn the programme selector to Off and disconnect the mains plug.
1. Loosen the hose clamp, carefully remove the drainage hose (residual water).
2. Clean the drainage hose and siphon connecting piece.
3. Reattach the drainage hose and secure the connection with the hose clamp.
Filter in the water supply
Risk of electric shock
Do not immerse the HydroSafe safety device in water (contains an electric valve).
Reduce the water pressure in the supply hose:
1. Turn off the tap.
2. Select any programme (apart from Spin / >Drain).
3. Choose $Start/Reload. Let the programme run for approximately 40
seconds.
4. Turn the programme selector to Off. Disconnect the mains plug.
Clean the filter:
1. Depending on model:
Disconnect the hose from the tap.
Clean the filter using a small brush.
and/or for Standard and Aqua-Secure models:
Remove the hose on the rear of the appliance,
Remove the filter with pliers and clean.
2. Connect the hose and check for leaks.
–Risk of scalding.
Allow the detergent solution to cool down.
– Turn off the tap.
ʑʑ$aʑaaaʑ$aʑaaʑʑSaaʑʑʑaʑLFʑ³1ʑaaʑaʑʑʑ2a

aLFDĈćS=VDĈćS=IDĈćS=/DĈćS=KDĈćS=cDĈćS=:Dä@DZDĈćS=2>Ĉ/
LFLFLFLF/c:ü
LFćI$aaaa>>$
11
What to do if ...
ʑWater is leaking out. – Attach/replace the drainage hose correctly.
– Tighten the screw connection of the supply hose.
ʑNo water supply.
Detergent not
dispensed.
–$Start/Reload not selected?
– Tap not turned on?
– Filter blocked? Clean the filter apage 10.
– Supply hose kinked or trapped?
ʑWashing machine door
cannot be opened.
– Safety function active. Programme stopped? apage 4.
–(without final spin) selected? apage 3, 4.
– Can be opened by emergency release only? apage 9.
ʑProgramme does not
start.
–$Start/Reload or Ready in time selected?
– Washing machine door closed?
– Childproof lock active? Deactivate apage 5.
ʑDetergent solution is not
drained.
–(without final spin) selected? apage 3, 4.
– Clean the detergent solution pump apage 10.
– Clean the waste pipe and/or drainage hose.
ʑWater not visible in the
drum.
– Not a fault - water below the visible area.
ʑUnsatisfactory spin
result.
Laundry wet/too damp.
– Not a fault - the unbalanced-load detection system has cancelled
the spin cycle because of uneven distribution of the laundry.
Distribute small and large items of laundry evenly inside the drum.
–SReduced Ironing selected? apage 5.
– Selected speed too low? apage 5.
ʑThe programme
duration changes
during the wash cycle.
– Not a fault – the programme sequence is optimised for the
particular wash process. This may result in changes to the
programme duration in the display field.
ʑSpin cycle performed
several times.
– Not a fault - unbalanced load detection system adjusts the
imbalance.
ʑResidual water in the
compartment for care
products.
– Not a fault - the action of the care product is not affected.
– Clean the insert if necessary apage 9.
ʑOdour formation in the
washing machine.
– Run programme LFCottons 90 °C without laundry. Use
standard detergent.
ʑStatus display³1flashes. Foam may be
coming out of the
detergent drawer.
– Too much detergent used? Mix 1 tablespoon of fabric softener
with ½ litre of water and pour into dispenser II (not for outdoor and
down-filled textiles!).
– Reduce the detergent dosage for the next wash cycle.
ʑIntense noise formation,
vibrations and
“wandering” during the
spin cycle.
– Are the appliance feet fixed?
Secure the appliance feet aInstallation instructions.
– Transportation safety devices removed? Remove the
transportation safety devices aInstallation instructions.
ʑNoises during spin and
drain cycles.
– Clean detergent-solution pump apage 10.
ʑDisplay panel/indicator
lamps do not function
during operation.
– Power cut?
– Fuses triggered? Reset/change the fuse.
– If the fault occurs repeatedly, call customer services.
ʑProgramme sequence
longer than usual.
– Not a fault - unbalanced load detection system adjusts imbalance
by repeatedly distributing the laundry.
– Not a fault - foam detection system active - adds an additional
rinse cycle.
ʑDetergent residues
on the laundry.
– Occasionally, phosphate-free detergents contain water-insoluble
residues.
– Use the 2Rinse cycle or brush out the laundry after washing.
If you cannot correct a fault yourself (switching on/off) or a repair is required:
– Turn the programme selector to Off and remove the mains plug from the socket.
– Turn off the water supply and call customer services aInstallation instructions.
Washing machine
en Instruction manual