Bosch Programme Table User manual

1 2 3 4 5 6
End of programme when ...
... $Start/Reload flashes and -0- appears on the display
panel.
Interrupting the programme
Programmes at high temper atures:
– Cool washi ng: Select Rinse/Spin.
– Press $Start/Reload.
Programmes at lower tempera tures:
–Rinse/Spin (deactivate =Aqua Plus button) or
select >Drain.
– Press $Start/Reload.
Changing the programme, if ...
... you have selected the wrong p rogramme by mistake:
– Reselect the programme.
– Press $Start/Reload. The new programme s tarts from
the beginning.
Reloading laundry, if ... apage 5
... $Start/Reload selected and then YES is lit in the
display panel. If N O is lit, the washing machine door
cannot be opened.
– Press $Start/Reload.
Correct installation according to the
separate Installation instructions.
Checking the machine
– Never use a dama ged machine.
– Inform customer service.
Connecting the mains plug
Make sure your hands are dry .
Take hold of the plug only.
Turning the tap on
Compartment II: Detergent for the ma in wash, water softener, bleach, stain remover
Sorting and loading laundry
Follow the manufacturer's c are information.
According to the informatio n on the care labels.
According to type, colour, soiling and temp erature.
Do not exceed the maximum load apage 7 .
Observe the important information apage 6.
Insert large and small items of laund ry.
Close the washing machine door. Ta ke care not to trap items of laun dry
between the washing machine doo r and the rubber seal.
Add detergent and care products
Measure accordingly:
Amount of laundry, soiling, water hardness ( ask your water supply
company) and manufacture r's instructions.
Pour liquid detergent into the appropriate dispenser and place in the drum.
Your washing machine
Congratulations äYou have o pted for a modern, high- quality
domestic appliance manufacture d by Bosch. This washing machine
is distinguished by its ec onomical water and energy c onsumption.
Each machine that leav es our factory has been inspected thorough ly
to ensure that it functio ns properly and is in p erfect condition.
Further information: www.bosch-hom e.com
Environmentally friendly waste disposal All packaging must be disposed of in accordance with
environmental guidelines.
This appliance is certified in accordance with European Dire ctive
2002/96/EEC on waste electrical and electro nic equipment
(WEEE).
This directive provides th e framework for the EU-wid e collection and
reuse of used appliances.
Intended use
Contents Page
ʋIntended use ................................................... ....................................1
ʋProgrammes ........................................................................................ 1
ʋSetting and adjusting the programme ................... ........................3
ʋWashing ........................................................................................... 3/4
ʋAfter washing ..................................................................................... .4
ʋIndividual settings .................................... ......................................5/6
ʋImportant information ........................ ............................................... 6
ʋOverview of programmes ........................................ ........................7
ʋSafety instructions ............................................................................. 8
ʋConsumption values ......................................................................... 8
ʋCare ................................................................................................. ....9
ʋInformation on the display panel .................................................... 9
ʋMaintenance .................................................................................... 10
ʋWhat to do if... .................................................................................. 1 1
Protection of the environment/Conservation tips
– Always fill the washing m achine with a maximum amount of
laundry for the relevant pr ogramme.
– Wash no rmally soiled laundry without a p re-wash.
– Instead of LFCottons 90 °C, choose the programme
LFCottons 60 °C with the additional fu nction ĈEcoPerfect.
Comparable cleaning resu lt with significantly lower e nergy
consumption.
– Measure th e detergent according to the m anufacturer's
instructions and water hardness .
– If the laundr y is then dried in the tumble d ryer, select the spin
speed according to t he instructions of the dryer manufacturer.
Preparation Before washing for the first time
Wash once without any lau ndry apage 9.
Setting** and adjusting programmes
Spin
speed*
Programme selector Start/
Reload
Programme selector for
switching the machine on
and off and for selecting
the programme. Can be
turned in either direction.
Programmes
Detailed overview of programmes apa ge 7.
Spin speed can be selected individually, irresp ective of the
selected programme and p rogramme progress.
LFCottons Hard-wea ring fabrics
+ Prewash Hard-wearing fabrics, pre -wash at
30 °C
/Mixed Load Different types of laundry
@SuperQuick 15’ Short programme
2Rinse/Spin Laundry washed by hand,
=Aqua Plus button activated; i f only
using the spin cycle, deactivate th e
button
>Drain Drain rinsing water for Rinse Hold
(without final spin)
ÿWool Hand/machine-washable wool
Delicate/Silk Delicate washable fabrics
IEasy-Care Easy-care fabrics
**If the 'symbol flashes in the
display panel, the childpro of lock
is active adeactivate, page 5.
Additional functions, the options
button and spin spee ds a
Individual settings, page 5 .
$Start/Reload
Washing
1
2
Washing
Detergent drawer with
compartments I,II,~
Washing machine
door
Compartment 0: Fabric softener, starch
Compartment I: Dete rgent for pre-wash
ʋfor domestic use only,
ʋfor washing machine -washable fabrics and hand-wash-
able wool in detergent solution ,
ʋto be operated with cold drinking water and comme r-
cially available detergents a nd care products which are
suitable for use in washing m achines.
.
– Do not leave children u nattended near the
washing machine.
– The washing machine is not to be used by
children or persons n ot familiar with the
operating instructions.
– Keep pets away from t he washing machine.
Dilute viscous fabric softener and fabric conditioner with wa ter.
This prevents blockages.
Individual settings
ʑReady in options button
When you select the programm e, the relevant programme duration is displayed. Y ou can
delay the start of the programme be fore it begins. The Ready in- time c an be set in
increments of one hour up to a m aximum of 24 hours. Press the Rea dy in button
repeatedly until the required number of hours is displayed (h = hour). Choose $Start/
Reload. It is not possible to make a djustments once the programme has s tarted.
ʑSpin c/ without final spin
Before and while the selected pro gramme is running, you can set the s pin speed or Rinse
Hold (without final spin, laundry soaks in t he last rinsing water, display - - -). The effec ts
depend on the programme progress. The maximum selectab le spin speed depends on the
model and on which progr amme is currently selected.
ʑAdditional functions aand overview o f programmes, see page 7
ĉSpeedPerfect For washing in a shorter time with a washing outcome comparabl e to
that of the standard progr amme. Maximum load aO verview of
programmes, page 7.
ĈEcoPerfect For saving energy with a wa shing performance comparable to that of
the standard programme.
SReduced Ironing Special spin sequence with subseq uent fluffing. More gentle final spin
- residual moisture in the laundry slightly increased.
=Aqua Plus Increased water level and additional rinse cycle, extended w ashing
time. For areas with very soft wa ter or for further enhancing the spin
result.
ʑChildproof lock and re loading
'Childproof lock/
Appliance lock
You can lock the washing machine to prevent the function s you have
set from being change d inadvertently.
ON /OFF: Press and hold the $Start/Reload button for approx. 5
seconds after the start/end of the p rogramme.
Note: The childproof lock can remain activated until you wish to start
the next programme, even af ter switching off the machine.
Then you can deactivate the childproof lock before the start of the
programme and activate it again as necessary once the programme
has started.
YES
Reload
If you want to add additional items of laundry after the program me has
started, choose $Start/R eload. The machine checks whether
reloading is possible.
YES is lit: Reloading is poss ible.
NO flashes: wait until YES lights u p.
Note: do not open the door until YES is lit.
NO: It is not possible to reload.
Note: For safety reasons, th e washing machine door re mains locked
when the water level and/or te mperature is high, or during spin ning.
To continue the programme, pre ss the $Start/Reload.
ʑ$Start/Reload
To start the programme or to subsequently load a dditional laundry, and to activate/deactiv ate
the childproof lock.
Individual settings
ʑSignal
Important information
Protecting the laundr y and the machine
– W hen determining the dosage of all wash ing powders, additives and cleaning agents, y ou
must follow the manufacturer's instructions.
– Empty pockets.
– Look out for m etal items (paperclips, etc.).
– Wash d elicates in a laundry bag (tights, curtain s, underwired bras).
– Fasten zips , do up any buttons.
– Brush san d out of pockets and col lars.
– Remove c urtain fittings or place in the laundry bag .
Laundry with varying degrees of soiling
Wash new items of c lothing separately.
light Do not pre-wash. If required, choos e the additional function
ĉSpeedPerfect.
Pre-treat any stains as necessary.
intense Do not load as much laundry.
Choose a programme with pre-wash.
Soaking Load laund ry of the same colour
Pour soaking agent/detergent into compartme nt II in accordance with the manufac turer's
instructions. Turn the prog ramme selector to LFCottons 30 °C and press $Start/Reload.
After approx. 10 minutes, press $Start/Reload to pause the pr ogramme. Once the required
soaking time has elaps ed, press $Start/Reload again to continue the programme, or select
a different programme .
Starching Laundry must not be treat ed with fabric softener
Starching is possible in a ll wash programmes if liquid starch is used. Pour the starch in
accordance with the manufacturer's instructions into fabric softener compartment ~(rinse f irst
if necessary).
Dyeing/Bleaching
Dye should only be used in normal household quantities. Salt may damage stainless steel.
Always follow the dye ma nufacturer's instructions! Do not use th e washing machine for
bleaching clothes!
2. Setting the volume
for ...
1. Activating the mode
for setting the signal
volume
Set to •1 step, the
display panel
lights up
press and hold +1 st ep, release
Button signals Information signals
Set to •
Setting the
volume*
Setting the
volume*
1 step
direct
* you may need to select
the function several times .
1200
1000
800
600
Rinse Hold
All buttons are sensitive an d need
only to be touched lightly. P ress
and hold the options an d spin
speed buttons to run th rough the
setting options automatical ly.
Additional
functions
3
Drum
Control panel
Service flap
Programme sequence displays:
ü'ü1üü2üüChildproof lock, washing, rinsing, spinning
1 - 24h Programme end after
Ready in
Display panel/
Options button
Removing the washing
Open the washing machine door and remove the washing.
If Rinse Hold (without fina l spin) is active: Turn the
programme selector to >D rain or select the spin speed.
Press $Start/Reload.
– Remove any foreig n objects - risk of rusting.
– Leave the washing machine door and de tergent
drawer open so that any residu al water can
evaporate.
Turning the tap off
Not required for Aqua-Stop models aRefer to installation
instructions.
Switching off
Turn the programme selector to Off .
(*depending on the model)

7
Overview of programmes aRefer to the table of consum ption values on page 8 and notes on page 6.
Programmes °C max. Type of laundry Additional functions; information
LFCott ons 30, 40, 60, 90 °C 7 kg/
4 kg*
Hard-wearing fabrics, heat-resista nt fabrics made of cotton or linen
ĉSpeedPerfect*, ĈEcoPerfect, SReduced Ironing,
=Aqua Plus
+ Prewash 40 °C IEasy-Care 30, 40, 60 °C
3 kg
Easy-care fabrics made of cotton , linen, synthetic fibres or blended fabrics
ĉSpeedPerfect, ĈEcoPerfect, SReduced Iron ing,
=Aqua Plus
/Mixed Load 40 °C F abrics made of cotton or easy-care fabrics
ĉSpeedPerfect, ĈEcoPerfect, SReduced Iron ing,
=Aqua Plus; different types of laundry can be wa shed together
cDelicate/Silk 30 °C
2 kg
For delicate, washable fabrics, e.g. made o fsil k,s atin, synthetic fibres or blended fabrics (e.g. curtains)
ĉSpeedPerfect, ĈEcoPerfect, SReduced Iron ing,
=Aqua Plus; No spin between rinse cy cles
:Wool cold, 30 °C Handäor machine-washable fabrics ma de of wool or
containing wool
Particularly gentle wash prog ramme to avoid shrinkage of lau n- dry, longer programme breaks (fab rics rest in the detergent solu- tion)
@SuperQuick 15’ 30 °C Ea sy-care fabrics made of cotton, linen, synthetic
fibres or blended fabrics
Short programme, approx. 15 minut es, suitable for lightly soiled laundry
Additional programmes 2Rinse/Spin, >Drain
*Reduced load for additional ĉSpeedPerfect function
As a short programme, /Mixe d Load 40 °C, with a maximum spin speed, is ideal.
Programmes without pre-was h - add detergent to compartmen t II, programmes with pre-wash - distribute the detergent between compartments Iand II.
1210 / 9000619963 *619963* WAE24367GB ...
Robert Bosch Hausgeräte Gm bH
Carl-Wery-Str. 34
81739 München / Deutschland
8
Safety instructions
– Read the instruction manual and installation instructio ns and all other information enclosed
with the washing machin e and act accordingly.
– Retain the documents for subsequent u se.
Risk of electric shock – Never pull the cable to disconnect the m ains plug.
– Never insert/disconnect the ma ins plug with damp hands.
Danger to life For worn-out appliances:
– Disconnect the m ains plug.
– Sever the m ains cable and discard along with the plug .
– Destroy the lock on the washing machine door. This w ill prevent
children from locking themsel ves in and risking their lives.
Danger of suffocation – Keep packaging, film and packaging p arts out of the reach o f
children.
Risk of poisoning – Keep detergen ts and care products out of the reach of children.
Risk of explosion – Items of laundry pretrea ted with cleaning agents containing
solvents, e.g. stain remover / clean ing solvent may lead to an
explosion after being loaded into the washing machin e.
Rinse items of laundry th oroughly by hand beforeha nd.
Risk of injury – The wa shing machine door can become v ery hot.
– Be careful when dra ining hot detergent solution.
– Do no t climb onto the washing mach ine.
– Do not lean on the open washing m achine door.
– Do no t reach into the d rum if it is s till rotating.
– B e careful when opening the deterge nt drawer while the machine
is in operation.
Consumption values
Programme Additional
function Load Electricity con- sumption***Water*** Programme
duration***
LF Cottons30 °C** 7 kg 0,55k Wh 60 l 2:36 h
LF Cottons40 °C** 7 kg 0,69k Wh 60 l 2:36 h
LF Cottons60 °C** 7 kg 1,33k Wh 60 l 2:39 h
LF Cottons 60 °C ĈEcoPerfect* 7 kg 1,05 kWh 47 l 3:08 h
LF Cottons90 °C 7 kg 2,00k Wh 64 l 2:47 h
IEasy-Care 40 °C** 3 kg 0,55k Wh 55 l 1:37 h
/ MixedLoad 40 °C** 3 kg 0,48k Wh 32 l 1:03 h
 Delicate/Silk30 °C 2 kg 0,21k Wh 31 l 0:41 h
:Wool cold 2 kg 0,10 kWh 39 l 0:40 h
:Wool 30 °C 2 kg 0,19 kWh 39 l 0:40 h
* Programme setting for testing and energy labelling in accordance with EU directive 92/75/EEC.
** Programme setting for testing in accordance with valid standard EN6 0456.
Note on comparative tests: Try o utth e test programme by washing the specified load usin g the maximum spin speed.
As a short programme for coloureds, sel ectt he programme
/ Mixed Load 4 0 °C with the maximum spin sp eed.
*** The values deviate from the indicated values d epending on water pressure, hardness, and inlet temperature, a mbient tem-
perature, type, amount and soiling o f the laundry, detergent used, fluctuations in the powe r supply and selected additional
functions.
9
Care
Before washing for the first time
Do not load any laundry into the machine. Turn on the ta p. Add the following to compartment II:
– approx. 1 litre water
– detergent (dosageacc ording to the manufacturer's instruc tions for light soiling and th e appropriate degree of water
hardness)
Set the programme selector to IEasy-Care 60 °C an d select $Star t/Reload. At the end of the programme, turn
the programme selector to Off.
Machine housing, control panel
– Wipe with a soft, damp cloth.
– Do no t use any abrasive cloths, scourers or cleanin g agents (stainless steel cleaners).
– Remove deterg ent and cleaning agent residue immediately.
– Do no t clean with a jet of water.
Cleaning the detergent drawer ...
... if it contains detergent or fabric softener residues.
1. Pull out, press ins ert down, remove draw completely.
2. To remove the in sert: press the insert upwards from below with your finger.
3. Clean the detergent dispenser tray and insert with water and a brus h andd ry it.
4. Attach the insert an d engage (connect the cylinder to the guide pin).
5. Push in the detergent dr awer.
Leave the detergent drawer open so that any residu alw aterc an evaporate.
Drum
Leave the washing machine door open so that the drum can dry out.
Rust stains - use chlorine-free c leaning agent, not steel wool.
Descaling Ensure t here is no laundry in the machine
Descale the appliance accordin g to the descaler manufacturer's instructions. This should no t be necessary if the
correct dosage of detergent is used.
Emergency release, e.g. in the event of a powe r cut
The programme continues to r un when the power has been restored. However, if the laund ryh as to be removed, the
washing machine door can be ope ned as follows:
Risk of scalding.
The detergent solution and laundry may be h ot.If possible, leave it to cool down.
Do not reach into the dru m if it is still rotating.
Do not open the washing machine door if water can be seen through the glass.
1. Turn the programm e selector to Off and disconnect the mains plug .
2. Drain the detergent solution apage 10.
3. Pull the emergency release downwards with a tool and release.
Washing machine door can then be opened.
Information on the display panel dep ending on model
F: 16 Close the washin g machine door properly; laundry may be caught.
F: 17 Open the tap complet ely, supply hose kinked or trapped;
Clean the filter apage 10, Water pressure too low.
F: 18 Detergent solution pump bloc ked; Clean the detergent solution pump apage 10. Drainage hose / wastepipe
blocked; Clean the drainage hose at the siphon apage 10.
F: 21 Motor fault. Call customer services.
F: 23 Water in the base tub, a ppliance leaking. Call customer services.
–Risk of electric shock. Disconnect the mains plug.
–Risk of explosion. N o solvents.
10
Maintenance
Detergent solution pump
Turn the programme selector to Off a nd disconnect the mains plug.
1. Open and remove the servi ce flap.
2. For models with a drainage hose: R emove the drainage hose from the retainer and pull it
from the housing. Remove the c ontainer.
Remove the sealing cap, allow the detergent solution to flow out.
Replace the sealing cap and p lace the drainage hose in the retainer.
2* For models without a drainage hose: Caref ully unscrew the pump cover until the
detergent solution begins to flow out. When the service flap is half full, close the pump cover
and empty the service flap. Repea t the above steps until all the detergent solution has
completely drained out.
3. Carefully unscrew the pump cover (residual water).
4. Clean the interior, pump cover threa d and pump housing (the impeller in the detergent
solution pump must r otate).
5. Replace the pump co vera nd screw it tightly.
6. Place the service flap backo n and close.
To prevent unused detergent fro m flowing straight into the drain during the next was h:Pou r 1 litre of water into
compartment II and start the >Drain programme.
Drainage hose at the siphon
Turn the programme selector to Off a nd disconnect the mains plug.
1. Loosen the hose clam p, carefully remove the drainage hose (residual water).
2. Clean the drainage hose and siphon connecting piece.
3. Reattach the drainag e hose and secure the connection with the hose cla mp.
Filter in the water supply
Risk of electric shock!
Do not immerse the HydroSafe safety device in water (contains an electric valve).
Reduce the water pressure in the supply hose:
1. Turn off the tap.
2. Select any p rogramme (except for 2Rinse/Spin // >Drain).
3. Choose $Start/Reload. Let the progra mme run for approximately 40 seconds.
4. Turn the programm e selector to Off. Disconnect the mains plug.
Clean the filter:
1. Depending on model:
Disconnect the hose from the tap.
Clean the filter using a small b rush.
and/or for Standard and Aqua-Secur e models:
Remove the hose on the rear of the appliance,
Remove the filter with pliers an d clean.
2. Connect the hose an d check for leaks.
–Risk of scalding.
Allow the detergent s olution to cool down.
– T urn off the tap.
11
What to do if ...
ʑWater is leaking out. – Attach/repla ce the drainage hose correctly .
– Tighten the screw co nnection of the supply ho se.
ʑNo water supply.
Detergent not
dispensed.
–$Start/Reload not selec ted?
– Tap not turned on?
– Filter bl ocked? Clean t he filter apage 10.
– Supply hose kink ed or trapped?
ʑWashing machine door
cannot be opened.
– Safety func tion active. Program me stopped? apage 4.
– Is Rinse Hold (without final spin) selected ? apage 3, 4.
– Can be opened by eme rgency release only? apage 9.
ʑProgramme does not
start.
–$Start/Reload or Ready in time selected?
– Washing machine d oor closed?
– Childpro of lock active? Deacti vate apage 5.
ʑDetergent solution i s
not drained.
– Is Rinse Hold (without final spin) selected ? apage 3, 4.
– Clean the detergent solution pump apage 10.
– Clean the waste pip e and/or drainage hose.
ʑWater not visible in the
drum.
– Not a fa ult - water below the visible area.
ʑUnsatisfactory spin
result.
Laundry wet/too damp.
– N ot a fault - the unbalanced- load detection system has c ancelled the
spin cycle becau se of uneven distribut ion of the laundry.
Distribute small and large item s of laundry evenly inside the drum.
–SReduced Ironing selected? apa ge 5.
– Selected spe ed too low? apage 5.
ʑThe programm e
duration changes
during the wash cycle.
– N ot a fault – the programme seq uence is optimised for the p articular
wash process. This may result in changes to the programme duration
in the display field .
ʑSpin cycle performed
several times.
– Not a fault - unbalanced load de tection system adjusts the
imbalance.
ʑResidual water i n the
compartment for c are
products.
– Not a fa ult - the action of the c are product is not a ffected.
– Clean the insert if ne cessary apage 9.
ʑOdour formation in the
washing machine.
– Run pro gramme LFCottons 90 °C without laundry. Use standard
detergent.
ʑStatus display³1flashes. Foam may be
coming out of the
detergent drawer.
– Too much detergen t used? Mix 1 tablespoon of fabric softener with
½ litre of water and pour into dispenser II (not for outdoor and down-
filled textiles!).
– Reduce the deterg ent dosage for the next wash cycle.
ʑIntense noise
formation, vibrations
and “wandering”
during the spin cyc le.
– Are the a ppliance feet fixed?
Secure the appliance feet aInstallation instruct ions.
– Transpo rtation safety device s removed? Remove the transp ortation
safety devices aI nstallation instructions.
ʑNoises during spin an d
drain cycles.
– Clean detergent-solutio n pump apage 10
ʑDisplay panel/indica tor
lamps do not fu nction
during operation.
– Power cut?
– Fuses tr iggered? Reset/chang e the fuse.
– If the fault occurs repeatedly, call custom er services.
ʑProgramme sequence
longer than usua l.
– Not a fault - un balanced load detection system adju sts imbalance by
repeatedly distributing the la undry.
– Not a fault - foam detection sys tem active - adds an additional rinse
cycle.
ʑDetergent residues
on the laundry.
– Occas ionally, phosphate-free d etergents contain w ater-insoluble
residues.
– Select the 2Rinse/S pin cycle or bru sh out the laundr y after
washing.
If you cannot c orrect a fault yourse lf (switching on/off) or a repair is required:
– Turn the programme se lector to Off and remove the mains plug from the socket.
– Turn of f the water supply and call customer serv ices aInstallation instru ctions.
Instruction manual
Washing machine
en
Observe the safety instructions on page 8.
Read these instructions and th e separate installation instructions b efore
operating the washing machine.

1 2 $$=>$$a$$Correct installation according to the
separate Installation instructions.
Checking the machine
– Never use a damaged machine.
– Inform customer service.
Connecting the mains plug
Make sure your hands are dry.
Take hold of the plug only.
Turning the tap on
Compartment II: Detergent for the main wash, water softener, bleach, stain remover
aa
Close the washing machine door. Take care not to trap
Pour liquid detergent into the appropriate dispense
Your washing machine
Congratulations äYou have opted for a modern, high-quality
domestic appliance manufactured by Bosch. This washing machine
is distinguished by its economical water and energy consumption.
Each machine that leaves our factory has been inspected thoroughly
to ensure that it functions properly and is in perfect condition.
Further information: www.bosch-home.com
Environmentally friendly waste disposal All packaging must be disposed of in accordance with
environmental guidelines.
This appliance is certified in accordance with European Directive
2002/96/EEC on waste electrical and electronic equipment
(WEEE).
This directive provides the framework for the EU-wide collection and
reuse of used appliances.
Intended use
Contents Page
ʋIntended use .......................................................................................1
ʋProgrammes ........................................................................................1
ʋSetting and adjusting the programme ...........................................3
ʋWashing ...........................................................................................3/4
ʋAfter washing ......................................................................................4
ʋIndividual settings ..........................................................................5/6
ʋImportant information ....................................................................... 6
ʋOverview of programmes ................................................................7
ʋSafety instructions .............................................................................8
ʋConsumption values .........................................................................8
ʋCare .....................................................................................................9
ʋInformation on the display panel ....................................................9
ʋMaintenance .................................................................................... 10
ʋWhat to do if... .................................................................................. 11
Protection of the environment/Conservation tips
– Always fill the washing machine with a maximum amount of
laundry for the relevant programme.
– Wash normally soiled laundry without a pre-wash.
– Instead of LFCottons 90 °C, choose the programme
LFCottons 60 °C with the additional function ĈEcoPerfect.
Comparable cleaning result with significantly lower energy
consumption.
– Measure the detergent according to the manufacturer's
instructions and water hardness.
– If the laundry is then dried in the tumble dryer, select the spin
speed according to the instructions of the dryer manufacturer.
Preparation a
Spin
speed*
Programme selector Start/
Reload
Programmes
Detailed overview of programmes apage 7.
Spin speed can be selected individually, irrespective of the
selected programme and programme progress.
LFCottons Hard-wearing fabrics
+ Prewash Hard-wearing fabrics, pre-wash at
30 °C
/Mixed Load Different types of laundry
@SuperQuick 15’ Short programme
2Rinse/Spin Laundry washed by hand,
=Aqua Plus button activated; if only
using the spin cycle, deactivate the
button
>Drain Drain rinsing water for Rinse Hold
(without final spin)
ÿWool Hand/machine-washable wool
Delicate/Silk Delicate washable fabrics
IEasy-Care Easy-care fabrics 'aa$~
Compartment 0: Fabric softener, starch
Compartment I: Detergent for pre-wash
ʋfor domestic use only,
ʋfor washing machine-washable fabrics and hand-wash-
able wool in detergent solution,
ʋto be operated with cold drinking water and commer-
cially available detergents and care products which are
suitable for use in washing machines.
.
– Do not leave children unattended near the
washing machine.
– The washing machine is not to be used by
children or persons not familiar with the
operating instructions.
– Keep pets away from the washing machine.
ʑ$ʑcʑaĉaĈS=ʑ'$$$ʑ$ʑĉLF$$$~
Additional
functions
Programme sequence displays:
ü'ü1üü2üüChildproof lock, washing, rinsing, spinning
1 - 24h Programme end after
Ready in
Display panel/
Options button >$a
(*depending on the model)

3 4
End of programme when ...
... $Start/Reload flashes and -0- appears on the display
panel.
Interrupting the programme
Programmes at high temperatures:
– Cool washing: Select Rinse/Spin.
– Press $Start/Reload.
Programmes at lower temperatures:
–Rinse/Spin (deactivate =Aqua Plus button) or
select >Drain.
– Press $Start/Reload.
Changing the programme, if ...
... you have selected the wrong programme by mistake:
– Reselect the programme.
– Press $Start/Reload. The new programme starts from
the beginning.
Reloading laundry, if ... apage 5
... $Start/Reload selected and then YES is lit in the
display panel. If NO is lit, the washing machine door
cannot be opened.
– Press $Start/Reload.
Sorting and loading laundry
Follow the manufacturer's care information.
According to the information on the care labels.
According to type, colour, soiling and temperature.
Do not exceed the maximum load apage 7.
Observe the important information apage 6.
Insert large and small items of laundry.
Close the washing machine door. Take care not to trap items of laundry
between the washing machine door and the rubber seal.
Add detergent and care products
Measure accordingly:
Amount of laundry, soiling, water hardness (ask your water supply
company) and manufacturer's instructions.
Pour liquid detergent into the appropriate dispenser and place in the drum.
äʋʋʋʋʋʋʋʋʋʋʋʋʋʋLFLFĈBefore washing for the first time
Wash once without any laundry apage 9.
Setting** and adjusting programmes
Programme selector
Programme selector for
switching the machine on
and off and for selecting
the programme. Can be
turned in either direction.
aLF/@2=>ÿI**If the 'symbol flashes in the
display panel, the childproof lock
is active adeactivate, page 5.
Additional functions, the options
button and spin speeds a
Individual settings, page 5.
$Start/Reload
Washing
1
2
Washing
Detergent drawer with
compartments I,II,~
Washing machine
door
0ʋʋʋ
Dilute viscous fabric softener and fabric conditioner with water.
This prevents blockages.
ʑ$ʑcʑaĉaĈS=ʑ'$$$ʑ$ʑĉLF$$$~
All buttons are sensitive and need
only to be touched lightly. Press
and hold the options and spin
speed buttons to run through the
setting options automatically.
3
Drum
Control panel
Service flap
Programme sequence displays:
ü'ü1üü2üüChildproof lock, washing, rinsing, spinning
Programme end after
Removing the washing
Open the washing machine door and remove the washing.
If Rinse Hold (without final spin) is active: Turn the
programme selector to >Drain or select the spin speed.
Press $Start/Reload.
– Remove any foreign objects - risk of rusting.
– Leave the washing machine door and detergent
drawer open so that any residual water can
evaporate.
Turning the tap off
Not required for Aqua-Stop models aRefer to installation
instructions.
Switching off
Turn the programme selector to Off.

56
$appears on the display
$=>$$Reload. The new programme starts from
a$$aa
äʋʋʋʋʋʋʋʋʋʋʋʋʋʋLFLFĈaaLF/@2=>ÿI'aa$~0ʋʋʋIndividual settings
ʑReady in options button
When you select the programme, the relevant programme duration is displayed. You can
delay the start of the programme before it begins. The Ready in- time can be set in
increments of one hour up to a maximum of 24 hours. Press the Ready in button
repeatedly until the required number of hours is displayed (h = hour). Choose $Start/
Reload. It is not possible to make adjustments once the programme has started.
ʑSpin c/ without final spin
Before and while the selected programme is running, you can set the spin speed or Rinse
Hold (without final spin, laundry soaks in the last rinsing water, display - - -). The effects
depend on the programme progress. The maximum selectable spin speed depends on the
model and on which programme is currently selected.
ʑAdditional functions aand overview of programmes, see page 7
ĉSpeedPerfect For washing in a shorter time with a washing outcome comparable to
that of the standard programme. Maximum load aOverview of
programmes, page 7.
ĈEcoPerfect For saving energy with a washing performance comparable to that of
the standard programme.
SReduced Ironing Special spin sequence with subsequent fluffing. More gentle final spin
- residual moisture in the laundry slightly increased.
=Aqua Plus Increased water level and additional rinse cycle, extended washing
time. For areas with very soft water or for further enhancing the spin
result.
ʑChildproof lock and reloading
'Childproof lock/
Appliance lock
You can lock the washing machine to prevent the functions you have
set from being changed inadvertently.
ON /OFF: Press and hold the $Start/Reload button for approx. 5
seconds after the start/end of the programme.
Note: The childproof lock can remain activated until you wish to start
the next programme, even after switching off the machine.
Then you can deactivate the childproof lock before the start of the
programme and activate it again as necessary once the programme
has started.
YES
Reload
If you want to add additional items of laundry after the programme has
started, choose $Start/Reload. The machine checks whether
reloading is possible.
YES is lit: Reloading is possible.
NO flashes: wait until YES lights up.
Note: do not open the door until YES is lit.
NO: It is not possible to reload.
Note: For safety reasons, the washing machine door remains locked
when the water level and/or temperature is high, or during spinning.
To continue the programme, press the $Start/Reload.
ʑ$Start/Reload
To start the programme or to subsequently load additional laundry, and to activate/deactivate
the childproof lock.
Individual settings
ʑSignal
Important information
Protecting the laundry and the machine
– When determining the dosage of all washing powders, additives and cleaning agents, you
must follow the manufacturer's instructions.
– Empty pockets.
– Look out for metal items (paperclips, etc.).
– Wash delicates in a laundry bag (tights, curtains, underwired bras).
– Fasten zips, do up any buttons.
– Brush sand out of pockets and collars.
– Remove curtain fittings or place in the laundry bag.
Laundry with varying degrees of soiling
Wash new items of clothing separately.
light Do not pre-wash. If required, choose the additional function
ĉSpeedPerfect.
Pre-treat any stains as necessary.
intense Do not load as much laundry.
Choose a programme with pre-wash.
Soaking Load laundry of the same colour
Pour soaking agent/detergent into compartment II in accordance with the manufacturer's
instructions. Turn the programme selector to LFCottons 30 °C and press $Start/Reload.
After approx. 10 minutes, press $Start/Reload to pause the programme. Once the required
soaking time has elapsed, press $Start/Reload again to continue the programme, or select
a different programme.
Starching Laundry must not be treated with fabric softener
Starching is possible in all wash programmes if liquid starch is used. Pour the starch in
accordance with the manufacturer's instructions into fabric softener compartment ~(rinse first
if necessary).
Dyeing/Bleaching
Dye should only be used in normal household quantities. Salt may damage stainless steel.
Always follow the dye manufacturer's instructions! Do not use the washing machine for
bleaching clothes!
2. Setting the volume
for ...
1. Activating the mode
for setting the signal
volume
Set to •1 step, the
display panel
lights up
press and hold +1 step, release
Button signals Information signals
Set to •
Setting the
volume*
Setting the
volume*
1 step
direct
* you may need to select
the function several times.
1200
1000
800
600
Rinse Hold
ü'ü1üü2üüg.
>or select the spin speed.
$– Leave the washing machine door and detergent
aRefer to installation

7
Overview of programmes aRefer to the table of consumption values on page 8 and notes on page 6.
Programmes °C max. Type of laundry Additional functions; information
LFCottons 30, 40, 60, 90 °C 7 kg/
4 kg*
Hard-wearing fabrics, heat-resistant fabrics made of cotton or linen
ĉSpeedPerfect*, ĈEcoPerfect, SReduced Ironing, =Aqua Plus
+ Prewash 40 °C IEasy-Care 30, 40, 60 °C
3 kg
Easy-care fabrics made of cotton, linen, synthetic fibres or blended fabrics
ĉSpeedPerfect, ĈEcoPerfect, SReduced Ironing, =Aqua Plus
/Mixed Load 40 °C Fabrics made of cotton or easy-care fabrics
ĉSpeedPerfect, ĈEcoPerfect, SReduced Ironing, =Aqua Plus; different types of laundry can be washed together
cDelicate/Silk 30 °C
2 kg
For delicate, washable fabrics, e.g. made of silk, satin, synthetic fibres or blended fabrics (e.g. curtains)
ĉSpeedPerfect, ĈEcoPerfect, SReduced Ironing, =Aqua Plus; No spin between rinse cycles
:Wool cold, 30 °C Handäor machine-washable fabrics made of wool or
containing wool
Particularly gentle wash programme to avoid shrinkage of laun- dry, longer programme breaks (fabrics rest in the detergent solu- tion)
@SuperQuick 15’ 30 °C Easy-care fabrics made of cotton, linen, synthetic
fibres or blended fabrics
Short programme, approx. 15 minutes, suitable for lightly soiled laundry
Additional programmes 2Rinse/Spin, >Drain
*Reduced load for additional ĉSpeedPerfect function
As a short programme, /Mixed Load 40 °C, with a maximum spin speed, is ideal.
Programmes without pre-wash - add detergent to compartment II, programmes with pre-wash - distribute the detergent between compartments Iand II.
1210 / 9000619963 *619963* WAE24367GB ...
Robert Bosch Hausgeräte GmbH
Carl-Wery-Str. 34
81739 München / Deutschland
8
Safety instructions
– Read the instruction manual and installation instructions and all other information enclosed
with the washing machine and act accordingly.
– Retain the documents for subsequent use.
Risk of electric shock – Never pull the cable to disconnect the mains plug.
– Never insert/disconnect the mains plug with damp hands.
Danger to life For worn-out appliances:
– Disconnect the mains plug.
– Sever the mains cable and discard along with the plug.
– Destroy the lock on the washing machine door. This will prevent
children from locking themselves in and risking their lives.
Danger of suffocation – Keep packaging, film and packaging parts out of the reach of
children.
Risk of poisoning – Keep detergents and care products out of the reach of children.
Risk of explosion – Items of laundry pretreated with cleaning agents containing
solvents, e.g. stain remover / cleaning solvent may lead to an
explosion after being loaded into the washing machine.
Rinse items of laundry thoroughly by hand beforehand.
Risk of injury – The washing machine door can become very hot.
– Be careful when draining hot detergent solution.
– Do not climb onto the washing machine.
– Do not lean on the open washing machine door.
– Do not reach into the drum if it is still rotating.
– Be careful when opening the detergent drawer while the machine
is in operation.
Consumption values
Programme Additional
function Load Electricity con- sumption***Water*** Programme duration***
LF Cottons 30 °C** 7 kg 0,55 kWh 60 l 2:36 h
LF Cottons 40 °C** 7 kg 0,69 kWh 60 l 2:36 h
LF Cottons 60 °C** 7 kg 1,33 kWh 60 l 2:39 h
LF Cottons 60 °C ĈEcoPerfect* 7 kg 1,05 kWh 47 l 3:08 h
LF Cottons 90 °C 7 kg 2,00 kWh 64 l 2:47 h
IEasy-Care 40 °C** 3 kg 0,55 kWh 55 l 1:37 h
/ Mixed Load 40 °C** 3 kg 0,48 kWh 32 l 1:03 h
 Delicate/Silk 30 °C 2 kg 0,21 kWh 31 l 0:41 h
:Wool cold 2 kg 0,10 kWh 39 l 0:40 h
:Wool 30 °C 2 kg 0,19 kWh 39 l 0:40 h
* Programme setting for testing and energy labelling in accordance with EU directive 92/75/EEC.
** Programme setting for testing in accordance with valid standard EN60456.
Note on comparative tests: Try out the test programme by washing the specified load using the maximum spin speed.
As a short programme for coloureds, select the programme
/ Mixed Load 40 °C with the maximum spin speed.
*** The values deviate from the indicated values depending on water pressure, hardness, and inlet temperature, ambient tem-
perature, type, amount and soiling of the laundry, detergent used, fluctuations in the power supply and selected additional
functions.
I$aaaa
>2>$ʑʑ$aʑaaaʑ$aʑaaʑʑSaaʑʑʑaʑLFʑ³1ʑaaʑaʑʑʑ2a

aLFĉĈS=IĉĈS=/ĉĈS=cĉĈS=:ä@2>ĉ/
LFLFLFLFĈLFI
/
::
/
9
Care
Before washing for the first time
Do not load any laundry into the machine. Turn on the tap. Add the following to compartment II:
– approx. 1 litre water
– detergent (dosage according to the manufacturer's instructions for light soiling and the appropriate degree of water
hardness)
Set the programme selector to IEasy-Care 60 °C and select $Start/Reload. At the end of the programme, turn
the programme selector to Off.
Machine housing, control panel
– Wipe with a soft, damp cloth.
– Do not use any abrasive cloths, scourers or cleaning agents (stainless steel cleaners).
– Remove detergent and cleaning agent residue immediately.
– Do not clean with a jet of water.
Cleaning the detergent drawer ...
... if it contains detergent or fabric softener residues.
1. Pull out, press insert down, remove draw completely.
2. To remove the insert: press the insert upwards from below with your finger.
3. Clean the detergent dispenser tray and insert with water and a brush and dry it.
4. Attach the insert and engage (connect the cylinder to the guide pin).
5. Push in the detergent drawer.
Leave the detergent drawer open so that any residual water can evaporate.
Drum
Leave the washing machine door open so that the drum can dry out.
Rust stains - use chlorine-free cleaning agent, not steel wool.
Descaling Ensure there is no laundry in the machine
Descale the appliance according to the descaler manufacturer's instructions. This should not be necessary if the
correct dosage of detergent is used.
Emergency release, e.g. in the event of a power cut
The programme continues to run when the power has been restored. However, if the laundry has to be removed, the
washing machine door can be opened as follows:
Risk of scalding.
The detergent solution and laundry may be hot. If possible, leave it to cool down.
Do not reach into the drum if it is still rotating.
Do not open the washing machine door if water can be seen through the glass.
1. Turn the programme selector to Off and disconnect the mains plug.
2. Drain the detergent solution apage 10.
3. Pull the emergency release downwards with a tool and release.
Washing machine door can then be opened.
Information on the display panel depending on model
F: 16 Close the washing machine door properly; laundry may be caught.
F: 17 Open the tap completely, supply hose kinked or trapped;
Clean the filter apage 10, Water pressure too low.
F: 18 Detergent solution pump blocked; Clean the detergent solution pump apage 10. Drainage hose / waste pipe
blocked; Clean the drainage hose at the siphon apage 10.
F: 21 Motor fault. Call customer services.
F: 23 Water in the base tub, appliance leaking. Call customer services.
–Risk of electric shock. Disconnect the mains plug.
–Risk of explosion. No solvents.
10
Maintenance
Detergent solution pump
Turn the programme selector to Off and disconnect the mains plug.
1. Open and remove the service flap.
2. For models with a drainage hose: Remove the drainage hose from the retainer and pull it
from the housing. Remove the container.
Remove the sealing cap, allow the detergent solution to flow out.
Replace the sealing cap and place the drainage hose in the retainer.
2* For models without a drainage hose: Carefully unscrew the pump cover until the
detergent solution begins to flow out. When the service flap is half full, close the pump cover
and empty the service flap. Repeat the above steps until all the detergent solution has
completely drained out.
3. Carefully unscrew the pump cover (residual water).
4. Clean the interior, pump cover thread and pump housing (the impeller in the detergent
solution pump must rotate).
5. Replace the pump cover and screw it tightly.
6. Place the service flap back on and close.
To prevent unused detergent from flowing straight into the drain during the next wash: Pour 1 litre of water into
compartment II and start the >Drain programme.
Drainage hose at the siphon
Turn the programme selector to Off and disconnect the mains plug.
1. Loosen the hose clamp, carefully remove the drainage hose (residual water).
2. Clean the drainage hose and siphon connecting piece.
3. Reattach the drainage hose and secure the connection with the hose clamp.
Filter in the water supply
Risk of electric shock!
Do not immerse the HydroSafe safety device in water (contains an electric valve).
Reduce the water pressure in the supply hose:
1. Turn off the tap.
2. Select any programme (except for 2Rinse/Spin // >Drain).
3. Choose $Start/Reload. Let the programme run for approximately 40 seconds.
4. Turn the programme selector to Off. Disconnect the mains plug.
Clean the filter:
1. Depending on model:
Disconnect the hose from the tap.
Clean the filter using a small brush.
and/or for Standard and Aqua-Secure models:
Remove the hose on the rear of the appliance,
Remove the filter with pliers and clean.
2. Connect the hose and check for leaks.
–Risk of scalding.
Allow the detergent solution to cool down.
– Turn off the tap.
ʑʑ$aʑaaaʑ$aʑaaʑʑSaaʑʑʑaʑLFʑ³1ʑaaʑaʑʑʑ2a

aLFĉĈS=IĉĈS=/ĉĈS=cĉĈS=:ä@2>ĉ/
LFLFLFLFĈLFI
/
::
/
I$aaaa>2>$
11
What to do if ...
ʑWater is leaking out. – Attach/replace the drainage hose correctly.
– Tighten the screw connection of the supply hose.
ʑNo water supply.
Detergent not
dispensed.
–$Start/Reload not selected?
– Tap not turned on?
– Filter blocked? Clean the filter apage 10.
– Supply hose kinked or trapped?
ʑWashing machine door
cannot be opened.
– Safety function active. Programme stopped? apage 4.
– Is Rinse Hold (without final spin) selected? apage 3, 4.
– Can be opened by emergency release only? apage 9.
ʑProgramme does not
start.
–$Start/Reload or Ready in time selected?
– Washing machine door closed?
– Childproof lock active? Deactivate apage 5.
ʑDetergent solution is
not drained.
– Is Rinse Hold (without final spin) selected? apage 3, 4.
– Clean the detergent solution pump apage 10.
– Clean the waste pipe and/or drainage hose.
ʑWater not visible in the
drum.
– Not a fault - water below the visible area.
ʑUnsatisfactory spin
result.
Laundry wet/too damp.
– Not a fault - the unbalanced-load detection system has cancelled the
spin cycle because of uneven distribution of the laundry.
Distribute small and large items of laundry evenly inside the drum.
–SReduced Ironing selected? apage 5.
– Selected speed too low? apage 5.
ʑThe programme
duration changes
during the wash cycle.
– Not a fault – the programme sequence is optimised for the particular
wash process. This may result in changes to the programme duration
in the display field.
ʑSpin cycle performed
several times.
– Not a fault - unbalanced load detection system adjusts the
imbalance.
ʑResidual water in the
compartment for care
products.
– Not a fault - the action of the care product is not affected.
– Clean the insert if necessary apage 9.
ʑOdour formation in the
washing machine.
– Run programme LFCottons 90 °C without laundry. Use standard
detergent.
ʑStatus display³1flashes. Foam may be
coming out of the
detergent drawer.
– Too much detergent used? Mix 1 tablespoon of fabric softener with
½ litre of water and pour into dispenser II (not for outdoor and down-
filled textiles!).
– Reduce the detergent dosage for the next wash cycle.
ʑIntense noise
formation, vibrations
and “wandering”
during the spin cycle.
– Are the appliance feet fixed?
Secure the appliance feet aInstallation instructions.
– Transportation safety devices removed? Remove the transportation
safety devices aInstallation instructions.
ʑNoises during spin and
drain cycles.
– Clean detergent-solution pump apage 10
ʑDisplay panel/indicator
lamps do not function
during operation.
– Power cut?
– Fuses triggered? Reset/change the fuse.
– If the fault occurs repeatedly, call customer services.
ʑProgramme sequence
longer than usual.
– Not a fault - unbalanced load detection system adjusts imbalance by
repeatedly distributing the laundry.
– Not a fault - foam detection system active - adds an additional rinse
cycle.
ʑDetergent residues
on the laundry.
– Occasionally, phosphate-free detergents contain water-insoluble
residues.
– Select the 2Rinse/Spin cycle or brush out the laundry after
washing.
If you cannot correct a fault yourself (switching on/off) or a repair is required:
– Turn the programme selector to Off and remove the mains plug from the socket.
– Turn off the water supply and call customer services aInstallation instructions.
Instruction manual
Washing machine
en
Observe the safety instructions on page 8.
Read these instructions and the separate installation instructions before
operating the washing machine.