Bosch WAP24200TC User manual

en Use and care manual
Washer
WAP24200TC

2
Welcome to Your New Washer!
Congratulations on your selection of a new Bosch washer
for your laundry needs. We are confident you will enjoy the
superior performance and reliability.
Please do not hesitate to contact our Customer Service
department if you have any questions or comments with
your new washer.
Thank you for choosing Bosch.
Visit our web site at www.bosch-home.com.tw for more
information and to view a selection of our products.

3
Table of contents en Useandcaremanual
Important information ................................................... 4
Purchase information ........................................................... 4
Customer service ................................................................. 4
Your washing machine is intended for ........................ 5
Importance and meaning of symbols .......................... 5
IMPORTANT SAFETY INSTRUCTIONS ........................ 6
Introduction to your new washer ................................. 7
Standard features and helpful information ...................... 7
Special features .................................................................... 7
Environmentally friendly use of your washer ................... 7
Dimensions and clearances required .......................... 8
Appliance dimensions ......................................................... 8
Length of power cord and water supply hoses .............. 8
Installation types ................................................................... 8
Installation instructions .............................................. 10
Introduction ......................................................................... 10
Tools needed ..................................................................... 10
Waste disposal .................................................................. 10
Parts provided with your washer .................................... 11
Installation checklist .......................................................... 11
Importance of installing on a solid, level floor ............. 12
Remove the transport bolts ............................................. 12
Water connections ............................................................ 12
Leveling the washer .......................................................... 14
Electrical connection ........................................................ 15
Transporting the washer .................................................. 16
Getting to know your appliance ................................. 17
Control panel ...................................................................... 17
Display field ........................................................................ 17
Laundry ........................................................................ 18
Preparing the laundry ....................................................... 18
Sorting the Laundry ........................................................... 18
Identifying and treating stains ......................................... 19
Laundry detergents and additives ............................. 19
Adding the correct amount of detergent ...................... 19
Cycle selection table ................................................... 20
Starching ............................................................................. 21
Dyeing/bleaching .............................................................. 21
Soaking ............................................................................... 21
Consumption values table ............................................... 22
Default cycle settings .................................................. 22
Changing the temperature range ................................... 22
Changing the spin speed range ..................................... 22
Delay Start .......................................................................... 22
Additional program settings ....................................... 23
Extra Rinse ......................................................................... 23
Easy Iron ............................................................................. 23
Prewash/Pre Treat ............................................................ 23
Operating Instructions ................................................ 23
Before doing any laundry with your washing
machine .............................................................................. 23
Before loading your first load of laundry ...................... 23
Using the cycle selector to choose a wash cycle ...... 23
Changing default cycle settings ..................................... 23
Selecting additional cycle settings ................................ 24
Loading the laundry .......................................................... 24
Filling the detergent and additives compartments ..... 24
Starting the cycle .............................................................. 25
Child lock ............................................................................ 25
Selecting a different cycle ............................................... 25
Pausing/Continuing the cycle ......................................... 25
Cancel cycle ...................................................................... 25
Cycle end with rinse stop ................................................ 26
Cycle end ............................................................................ 26
Removing laundry/switching the appliance off ........... 26
Signal ........................................................................... 27
Cleaning and maintenance ......................................... 28
Cleaning the housing and control panel ...................... 28
Cleaning the drum ............................................................ 28
Descaling the washer ....................................................... 28
Cleaning the detergent dispenser ................................. 28
Cleaning the water inlet strainers .................................. 28
Cleaning the drain pump ................................................. 29
Troubleshooting .......................................................... 30
Emergency door lock release ........................................ 30
Troubleshooting ................................................................. 31
Error messages ................................................................. 33
Customer service ........................................................ 34

4
Important information
Purchase information
Please take a moment to record the following basic
information about your new Bosch washer.
This information will be helpful in the event you need to
contact Customer Service or would like to order
accessories or replacement parts.
The E-Nr. (model number) and the FD (serial number)
are found on the rating plate label.
see illustration
The model number includes the slash and a two digit
number (eg: "/27"). Please be sure to include the final 2
digit number when filling in your model number. This
helps make sure any parts you may need are correctly
matched to your specific machine.
Date of Purchase:___/___/_____
Where Purchased:___________________________
E-Nr. :_________/____ (ex: WFVC5330US/27)
FD :_______-_______ (ex: FD 9005| 90001)
Customer service
Your washer does not require any special care other than
the maintenance and care mentioned in this manual. If
you have a problem with your washer, please consult
~Troubleshooting; Page 30
This may save you money. If a technician comes out to
advise you of information that is in the Troubleshooting
table you may be charged, even if your washer is still
under warranty.
If service becomes necessary, contact your dealer or our
Customer Service Department. Do not attempt to repair
the appliance yourself. Any work performed by
unauthorized personnel may void the warranty.
If you are having a problem with your washing machine
and are not pleased with the service you have received,
please follow these steps:
1. Contact the dealer or our Customer Service
Department and explain to them why you are not
satisfied. This will usually correct the problem.
2. If after working with the dealer or our Customer
Service Department the problem still has not been
resolved to your satisfaction, please call us at:
0800-368-888
When calling the Customer Service Department please
have the following information available:
▯E-Nr. (model number, example: WTVC3300UC/27)
▯FD (serial number)
▯Date of Original Purchase (receipt required)
▯Date Problem Occurred
▯Explanation of Problem
(1U )'

5
Your washing machine is intended for
▯Only household use and in a non-commercial
environment.
▯Household use only washing machine-washable
textiles
▯Washing with common cold and hot (maximum 60 °C)
tap water and commercially available detergents and
cleaning products suitable for use in washing
machines.
▯We recommended detergents designed specifically
for front loading washing machines.
NOTICE: Do not use chlorine bleach!
▯When measuring all detergents/stain removers/
laundry care products be sure to follow the
manufacturer's instructions.
▯The washer can be operated by people with reduced
physical, sensory or mental capabilities, and by people
with little experience or knowledge if they are
supervised or were trained by a responsible person.
▯Children may not do any laundry without supervision.
▯Keep pets away from the washer.
▯Set-up conditions:
Ambient temperature: 0-40 °C
Relative humidity: under 95%
▯Installation by qualified installers.
▯Installation in accordance with all regulatory
requirements; if in doubt have the appliance installed
by a specialist familiar with these requirements.
Read the use and set-up instructions and all other
information included with the washer and act
accordingly.
Keep documents for future use.
Importance and meaning of symbols
Important safety information is contained in this manual
and on the warning labels located on your washer.
Standard symbols and headings are used to identify
areas where you should take precautions to avoid injury
or damage. Please take a moment to become familiar
with each of these symbols and what they mean before
proceeding.
9WARNING
WARNING
This indicates that death or serious injuries may
occur as a result of non-observance of this warning.
9CAUTION
CAUTION
This indicates that minor or moderate injuries may
occur as a result of non-observance of this warning.
NOTICE: This indicates that damage to the appliance or
property may occur as a result of non-observance of this
warning.
Tip: This symbol is used to draw the user's attention to
important matters.

9IMPORTANT SAFETY INSTRUCTIONS
READ AND SAVE THESE INSTRUCTIONS
6
IMPORTANTSAFETYINS READ AND SAVE THESE INSTRUCTIONS
WARNING
When properly cared for, your new appliance has been
designed to be safe and reliable. Read all instructions
carefully before use. These precautions will reduce the
risk of burns, electric shock, fire, and injury to persons.
When using appliances, basic safety precautions must
be followed, including those in the following pages.
Examine the appliance after unpacking it. In the event of
transport damage, do not plug it in.
WARNING
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK,
SERIOUS INJURY OR DEATH WHEN USING YOUR
WASHING MACHINE, FOLLOW BASIC PRECAUTIONS
INCLUDING THE FOLLOWING
▯Bosch washers are provided with an Operating, Care
and Installation Instruction manual. Read and
understand all instructions before using the washing
machine.
▯Do not wash articles that have been previously
cleaned, washed, soaked, or spotted with gasoline, dry
cleaning solvents, other flammable or explosive
substances as they give off vapors that could ignite or
explode.
▯Do not add gasoline, dry cleaning solvents, or other
flammable or explosive substances to the wash water.
These substances give off vapors that could ignite or
explode.
▯Under certain conditions hydrogen gas may be
produced in a hot water system that has not been used
for 2 weeks or more. HYDROGEN GAS IS EXPLOSIVE.
If the hot water system has not been used for this
length of time, turn on all hot water faucets and let the
water flow out of each faucet for several minutes before
using the washing machine. This will release any
accumulated hydrogen gas. As the gas is flammable,
do not smoke or use an open flame while carrying out
this procedure.
▯Before the appliance is removed from service or
discarded, remove the door to prevent children from
playing or hiding inside. Also remove the power cord/
plug.
▯Do not allow anyone to climb, lean or hang on any part
of the washer including any protruding components
such as the appliance door or a pullout shelf.
▯Use caution when draining hot water from the washer
drum such as during pump maintenance or when using
the emergency door open procedure.
▯Do not reach into the appliance if the wash drum is
moving.
▯Do not tamper with the controls.
▯Do not repair or replace any part of the appliance or
attempt any service unless specifically recommended
in the user manual or in published user repair
instructions that you understand and have the skills to
carry out.
▯Always unplug the washing machine from the power
supply before attempting any service. Disconnect the
power cord by grasping the plug, not the cord.
▯Do not machine wash fiberglass materials (such as
curtains and window coverings that use fiberglass
materials). Small particles may remain in the washing
machine and stick to fabrics in subsequent wash loads
causing skin irritation.
▯Do not install or store the washer where it will be
exposed to the weather. Hoses and internal parts may
be damaged if exposed to freezing temperatures.
▯Do not use the washing machine if it has a worn power
cord or loose plug.
▯The washing machine must only be used for its
intended purpose.
▯Always follow the fabric care instructions
recommended by the clothing manufacturer.
▯Make sure all water connections to the washing
machine have shut-off valves that are readily
accessible during normal operation of the washer. Turn
off both valves during periods in which the washer is
not in use and before leaving for extended periods
such as vacations to reduce the risk of water damage
in the event of a leak. Turn the valves back on prior to
resuming use of the washer.
▯Do not operate the washing machine if parts are
missing or broken.
▯Do not operate the washing machine until you are sure
that:
- the washing machine has been installed according
to the Installation Instructions.
- all water, drain, power and grounding connections
are in compliance with all local regulations and/or
other applicable regulations and requirements.
▯See the installation instructions in this manual for
grounding requirements.
~Electrical connection; Page 15
WARNING
WARNINGS FOR CHILDREN
▯Do not allow children to play on or in the appliance.
Close supervision of children is necessary when the
appliance is used near children.
▯Make sure to utilize all child lock/safety features of your
appliance, and be sure to turn the appliance Off when
not in use.
▯Appliances are not intended for use by children,
however when children become old enough to operate
the appliance, it is the responsibility of the parents or
legal guardians to ensure they are instructed in safe
practices by qualified persons.
▯Keep all laundry aids (including detergents, bleach,
fabric softener, etc.) out of the reach of children.
SAVE THESE INSTRUCTIONS!
Keep These Instructions for Future Reference
In case of change of ownersh1ip, manual should be
conveyed with the washer.

7
Introduction to your new washer
9WARNING
RISK OF FIRE, ELECTRIC SHOCK OR INJURY
To reduce the risk of fire, electric shock or injury to
persons, read the IMPORTANT SAFETY
INSTRUCTIONS of this manual before installing or
operating this appliance.
~IMPORTANT SAFETY INSTRUCTIONS; Page 6
Standard features and helpful information
Thank you for choosing Bosch for your laundry
appliance needs.
Please read and follow the use & care, important safety
instructions and troubleshooting information contained in
this manual. Please retain this manual for future
reference.
Standard features
▯8 kg large drum capacity (for regular cotton loads).
▯Low washing and spinning noise levels.
▯Large door opening featuring magnetic lock,
160º opening angle.
▯The maximum loading of dry textile materials is 8 kg
Quality tested
Every Bosch washer is thoroughly tested before leaving
the factory. As a result, a small amount of residual water
may remain in the washer drum. We recommend running
the Maintanance cycle to remove this water prior to
washing your first load of laundry.
~Before loading your first load of laundry; Page 23
Web Site
Visit our web site at www.bosch-home.com.tw for more
information and to view a selection of our products.
About this manual
Read your user manual. It contains valuable information
about safety, installation and operation of your new
appliance.
This can save your time, make it easier to correctly install
and use your washer, and improve your overall
satisfaction with your new appliance.
Special features
▯Load adjust matches the water and power
consumption to each cycle according to the amount of
laundry sensed in the drum and the type of fabric.
The load adjust function runs automatically to keep
energy and water consumption as low as possible.
The water level sensor ensures the water level is
correct for the laundry and the cycle selected.
▯The automatic unbalanced load detection system
spins the laundry several times to ensure even
distribution.
If the laundry is unevenly distributed, the spin speed is
reduced, or the laundry may not be spun for reasons
of safety.
In the Wool cycle, the spin cycle is attempted only
twice in order to prevent felting.
Environmentally friendly use of your
washer
Your new Bosch washing machine is designed to use
water, energy and detergent in a highly efficient way to
help reduce operating costs, conserve resources and
protect the environment.
▯Utilize the maximum amount of laundry for the
appropriate cycle.
▯Avoid using too much detergent.
▯Wash normally soiled laundry without a prewash.
▯Save energy and detergent when washing lightly and
normally soiled laundry.
▯Energy-saving mode: The display panel lighting goes
out after a few minutes and Start/Pause flashes. To
activate the display, press any button.
Energy-saving mode is not activated if a program is
running.
▯If the laundry will be dried in a dryer afterwards, select
spin speed according to the dryer manufacturer’s
instruction.

8
Dimensions and clearances required
Appliance dimensions
Length of power cord and water supply
hoses
Installation types
Stacked washer and dryer
A Bosch dryer of the same dimensions can be placed on
top of the washer to save space.
Use the special washer-dryer sets which can be obtained
from customer service or your local dealer (see the dryer
user manual).
Label Dimension Metric
a width 60 cm
b depth
(to front of door)
64 cm
c height (minimum*)
height (maximum*)
85 cm
86 cm
d side clearance
(door open 160°)
33 cm
e depth
(door open 90°)
105,4 cm
Weight approximate 77.2 kg
* height of appliance depends on the extension of the
height adjustable appliance feet.
To left of
washer*
To right of
washer*
Electric power cord 130 cm 119 cm
Water supply hoses 101 cm 71 cm
Drain Hose 94 cm 140 cm
* Facing the front of the washer
D
E
F
G
H


Clearance requirements (Minimum)
A Both Sides 1.5 cm
B Top 16 cm
C Rear* 8 cm
D Front 8.5 cm
* Rear clearance as close to wall as venting or water
connection will allow. If the washer is installed with a
dryer, the greater rear clearance for the dryer venting is
required for the laundry pair.
Ventilation area (Minimum)
E Top 404 sq. cm
F Bottom 404 sq. cm
Vent spacing (actual not minimum dimensions)
G 94 cm
H 66 cm
J 7.6 cm
K 73 cm
%
&
$
'
+
*
)
(
)

9
Stand alone (shown) or Side-by-Side
Under counter (Preferred)
Front of the appliance fully open.
No doors or coverings.
Under counter (Less Desirable)
If front of the appliance is covered ventilation openings
must be installed.
Minimum opening dimensions
A 60.5 cm
B 60.5 cm
C 85 cm
(
)
)
(
.
-
&
$
'
$&
%
E & F are minimum area sizes
E 404 sq.cm
F 404 sq.cm
G & H
actual spacing dimensions for min. open area sizes
G 7.6 cm
H 35.6 cm
(
)
*
+

10
Installation instructions
9WARNING
RISK OF FIRE, ELECTIRICAL SHOCK OR INJURY
TO PERSONS
To reduce the risk of fire, electric shock or injury to
persons, read the Important Safety Instructions at
the front of this manual before installing or operating
this appliance.
9CAUTION
WASHING MACHINE IS HEAVY
Use additional help and care when lifting and
positioning.
Introduction
Read these installation instructions completely and
carefully before starting to install your new washing
machine. The information contained can save your time
and effort and will help to ensure optimum performance
of your new washer. Be sure to observe all warnings and
cautions.
NOTICES
▯Frozen hoses can tear or burst. Do not install the
washing machine outdoors or in an area exposed to
freezing condtions.
▯If the washing machine is located in a room which will
be exposed to temperatures below freezing, or if it is
located in a cabin that is being shut down for the
winter, any residual water in the pump or water inlet
hose(s) must be drained.
▯Take care not to damage the washing machine. Do
not hold on to protruding parts (e.g. door) when lifting.
▯In addition to the safety information listed here, the
local water and electricity supplier may have special
requirements.
▯If in doubt, have the appliance connected by an
authorized technician.
These installation instructions are intended for use by
qualified installers. In addition to these instructions, the
installation must comply with:
National Electrical Code and latest editions of local
regulations.
Tools needed
The following tools may be helpful during installation of
your washer.
▯13mm socket for removing the transport bolts.
▯17mm wrench for adjusting the appliance feet.
▯Bubble level for leveling the appliance.
Waste disposal
Disposal of Packaging Materials
After unpacking your new appliance dispose of the
protective packaging materials in an environmentally
friendly way. Ask your dealer or inquire with your local
authority regarding currently acceptable means of
disposal.
9WARNING
WARNINGS FOR CHILDREN
Do not let children play with packaging and
associated parts to avoid risk of choking or
suffocation.
Disposal of Your Old Appliance
Your old appliance can be recycled if it is no longer to be
used. Prior to disposing of your old appliance observe
the following precautions to reduce safety risks.
9WARNING
TO AVOID RISK OF INJURY OR DEATH, DO THE
FOLLOWING
- after unplugging the old appliance, remove the
electric power cord and dispose of properly.
- remove the door or permanently disable the door
lock to prevent children from being locked inside.

11
Parts provided with your washer
Back side of the washing mashine
Washer drum contents
2 water supply hoses are shipped in the washer drum.
Be sure to remove each of these items from the drum
before using the washer.
NOTICE: If any parts are missing please notify your
dealer immediately.
Installation checklist
Review the following list and check off each step as it is
completed during installation.
(Power cord with plug
0Literature pack; contents:
▯User manual
▯Warranty
▯Covers with hose holders
8Drain hose
@Elbow to form the hose to fit the drain pipe



#
HHot water connection
PCold water connection
èInstallation Step Page
Completely remove all four shipping
bolts keeping the bolt and bushing
assemblies intact
12
Connect the water supply hose and
drain hose
12
Connect the electrical power 15
Slide the washing machine into its final
location
Level the washing machine (as low as
possible)
14
Before washing laundry, run a mainte-
nance cycle
23
+
3

12
Importance of installing on a solid, level
floor
Your new Bosch washing machine utilizes high spin
speeds to achieve superior water removal from your
laundry resulting in reduced drying time. It is important to
install your washing machine on a floor that will provide
firm support. This prevents the washer from experiencing
excess vibration during spinning that could cause the
washer to move or be noisy.
The installation surface must be solid and level in both
directions. Avoid installing your washer on soft surfaces
such as floors with carpet or foam backed covering
material.
If installing the washer on a wooden floor, observe the
following:
▯install the washer in a corner for better support if
possible.
▯if necessary, reinforce the floor by screwing a water
resistant wooden board to the floor (minimum of 30
mm thick).
9CAUTION
DANGER OF COLLAPSING
Don’t set up the washing machine on a pedestal.
Remove the transport bolts
9CAUTION
DAMAGE TO THE APPLIANCE
▯The machine is secured for transport with
transport bolts.
Transport bolts that are not removed can damage
the drum during operation of the machine, the
washer will vibrate, and it will be much noisier
during spin cycles if the transport bolts are not
removed before use.
Be sure to remove all 4 transport bolts
completely before first use. Keep the transport
bolts.
▯In order to prevent transport damage during later
transport, be sure to re-install the bolts before
transport.
1. Remove hoses from the brackets.
2. Loosen and remove all 4 transport bolts.
Remove the sleeves. Take the power cable out of the
brackets.
3. Place covers over the transport bolt holes
Four plastic covers are provided in the small parts bag
included with your washer. Separate these covers and
install one in each hole where the transport bolts were
removed.
Lock covers firmly by pressing on the snap hook.
Insert hose holder. Secure hoses in the hose holders.
NOTICE: Keep the assemblies together and store them
for later use such as when moving the washer.
Water connections
Water supply hose connections
NOTICES
▯The washing machine must only be operated with cold
and hot (max. 60 °C) tap water. Do not connect the
appliance to the mixer tap of a pressurized hot-water
boiler.
▯To prevent water damage, the hot and cold water
valves should be accessible when the washing
machine is in place and should always be turned off
when the washing machine is not in use.
▯If installing the washing machine in a new building or a
building in which the plumbing system was recently
installed or upgraded, flush the lines before installing

13
the washing machine to remove any sand, dirt or
residue.
▯To prevent leakage or water damage, follow the
instruction in this chapter.
▯If in doubt, have the appliance connected by an
authorized technician.
Connect your washer to the wall faucets.
Observe each of the following:
▯Only use the new water supply hose shipped with your
washer. Never connect old used hoses.
▯The water supply hoses must not be kinked, bent or
flattened in such a way as to potentially diminish water
flow.
▯The water supply pressure must be between 1 - 10 bar
with a minimum of 8 liters of flow per minute. A
pressure regulator valve must be installed if the
maximum water pressure is exceeded.
▯Make sure the water supply faucet is easily accessible
when the washer is in use. The faucet should be
turned off if the washer is going to be unused for
extended periods of time.
▯Make sure rubber washers are in place at both ends of
the water supply hose. Missing washers could cause
leaks.
▯The connection points are under full water pressure.
Turn on the water tap and check for leaks.
▯Periodically inspect the water supply hose and replace
with a new hose if cuts, kinks or leaks are observed.
Water connection hoses
▯red - Hot water-hose
▯blue - Cold water-hose
Attach this end to water tap. Hand tighten only.
Attach this end of the hose to the back of the washing
machine. Hand tighten only.
Cold water connection only
NOTICE: Both water connection hoses have to be
connected to water! If only cold water is available, then
both hoses have to be connected via Y-piece to cold
water. The washing machine have a built-in heater to
reach selected tempereatures.
Water drain hose connection
NOTICES
▯Do not reuse an old drain hose. Only use the drain
hose and parts included with your washer.
▯Do not kink or modify the water drain hose.
Types of drainage hookups
Standpipe
Attach the drain hose using the elbow included with your
washer.
Fit the drain hose to the elbow provided leaving a
maximum of 4 inches of drain hose projecting. Insert this
section of the drain hose into the drain pipe. Secure the
elbow and hose with a nylon tie strap or the equivalent to
keep the hose from coming out of the drain pipe during
use.
GUDLQ
SLSH
FDEOHWLH
LQ

14
Sink siphon
Secure the drain hose to the sink siphon using a Ø 20-44
mm hose clip (available from a hardware store).
Wash Basin
9WARNING
SCALDING
When washing at high temperatures, there is a risk
of scalding if you touch hot suds, e.g. when
pumping out hot suds into a wash basin.
Do not reach into the hot suds.
9CAUTION
APPLIANCE DAMAGE/DAMAGE TO TEXTILES
If the end of the drain hose is dipped into the
pumped-out water, water can be sucked back into
the appliance and can damage the appliance/
textiles.
Make sure that:
▯The sealing plugs do not seal the drain of the wash
basin.
▯The end of the drain hose does not dip into the
pumped-out water.
▯The water flows out fast enough.
Attach the drain hose securely to the wash basin.
NOTICE: In any multi-story installation, the washer
should be installed on a drained floor to prevent water
damage to rooms below in the event of a leak.
Leveling the washer
Importance of leveling the washer
Your new washer uses high spins speeds to remove
water at the end of the wash cycle. It is important that
your washer is level and that all four washer feet press
with equal pressure against the floor. This will help
assure the quietest, most vibration-free use of your
washer.
Follow these steps:
1. Install the washer on a level and solid surface,
preferably in a corner of a room.
2. If the floor is uneven (or unlevel) adjust the washer feet
as required to level the washer. Do not place anything
under the washer feet to help level the washer.
3. Extend the washer feet no more than is necessary. The
more the feet are extended, the more vibration the
washer will experience. Start with the washer feet
turned all the way in and adjust each foot as
necessary.
4. Use a bubble level to check the top of the washer to
make sure it is level side to side and front to rear.
5. Press down on each corner of the washer top to make
sure the washer doesn’t “wobble“. There should be no
"give" or movement. All four washer feet should press
equally against the floor. This is just as important as
the washer being level to prevent vibration.
6. When the washer is level and does not wobble, lock
the washer feet in place by tightening the locknuts
against the washer bottom. Be sure to do this without
changing the height of the foot (hold the foot while
tightening the locknut).
Procedure for adjusting the washer feet:
1. After determining which washer feet need to be
extended, have someone lift up on the washer slightly
to take pressure off the foot to be adjusted.
2. Turn the grey plastic foot to extend it downward as far
as necessary to raise the corner of the washer the
correct amount to level the washer.
3. When the height of the foot is correct, use a 17 mm
open end wrench to tighten the locknut against the
washer bottom. The locknut should be tight against the
bottom of the washer to lock the foot in place.

15
Electrical connection
9WARNING
ELECTRICAL SHOCK
Improper connection of the ground may result in
electric shock. Have the appliance checked by a
qualified technician or licensed electrician if you are
in doubt as to whether the washer has been
properly grounded.
9WARNING
ELECTRICAL SHOCK
To reduce the risk of fire or electrical shock, DO
NOT use an extension cord or an adapter to
connect the washing machine to the power supply.
9WARNING
ELECTRICAL SHOCK
To reduce the risk of electrical shock:
▯Only pull out the main cable by the plug and
never by the cable, as this could damage it.
▯Never touch or hold the main plug with wet
hands.
▯Never unplug the main plug during operation.
Grounding Instructions
This appliance must be grounded. In the event of
malfunction or breakdown, grounding will reduce the risk
of electric shock by providing a path of least resistance
for the electric current. This appliance is equipped with a
cord that has an equipment grounding conductor and a
grounding plug. The plug must be plugged into an
appropriate outlet that is properly installed and grounded
in accordance with all local codes and ordinances.
Important Points
▯Do not modify the plug provided with the appliance. If
the plug will not fit into the outlet have a properly
grounded outlet installed by a qualified electrician. Do
not cut, remove or bypass the grounding prong on the
washer power cord plug.
▯The washer power cord plug must be easily
accessible when the washer is operating.
▯When unplugging or plugging in the washer power
cord, grasp the plug. Do not pull on the power cord to
unplug the washer.
▯The household electrical supply must be suitable for
the voltage specification shown on the washer rating
plate (located inside the washer door, immediately
below the drum opening).
~Purchase information; Page 4
See the table below for connection specfications and
fuse/breaker requirements.
▯The wiring for the electrical outlet circuit must be
sufficient to meet the appliance requirements.
▯Protect the power cord from physical damage, such as
being twisted, kinked, pinched, caught in a door, or
walked upon.
▯If the power cord is damaged, it must be replaced by a
qualified person to avoid a fire/shock hazard.
Replacement power cords are available through
Customer Service.
~Customer service; Page 4
▯The washing machine must only be connected to an
individual branch circuit via a socket which has been
properly installed and grounded.
▯Make sure that:
- the power plug fits into the socket
- the wire size is sufficient
- the grounding system is properly installed:
▯The power cord may be replaced by an qualified
person only. Replacement power cords are available
from Customer Service. To reduce the risk of fire or
electrical shock, DO NOT use an extension cord or an
adapter to connect the washing machine to the power
supply. If a ground fault circuit breaker is to be used,
only use the types marked with the following symbol:
z. Only this symbol can guarantee compliance with
all current regulations.
Volts Hertz Watts
220 60 2.400

16
Transporting the washer
Before transporting the washer
1. Disconnect the washer power cord from the wall
outlet.
2. Turn off the water supply to the washer.
3. Disconnect water supply lines from the tap.
4. Disconnect the drain hose from the drain location.
5. Install the transport bolt assemblies as shown below.
Remove the transport bolt hole covers
1. Remove all four transport bolt hole covers.
2. Pull the tip of the arrow on the cover out slightly to
disengage the locking tab.
3. Rotate the cover counterclockwise to remove. Repeat
for all 4 transport bolt hole covers.
Insert the transport bolt assemblies
1. Each assembly consists of a plastic bushing and a
bolt that extends through the bushings. Unscrew the
bolt until the threaded end is flush with the end of the
plastic bushing.
2. Insert the transportation bolt and bushing assembly as
shown. The metal housing slides around the bolt
through the slot in the plastic bushing as the bushing
is slid into place. The open part of the bushing slot
should be facing the direction shown to allow the
assembly to slide fully into place.
3. When the bolt is in place screw it in until the bolt
threads engage the drum. Double check and ensure
bolts are screwed into threaded holes and not into
adjecent cracks or crevices. Repeat the process for all
4 transportation bolt assemblies before tightening any
all the way. Complete tightening all 4 bolt assemblies
until they are each snug in place.

17
Getting to know your appliance
Control panel
Display field
+
   #
(Temp. selection, Spin Speed, Delay-Start
To change the default cycle settings.
Indicator lamp lights up if the setting is active.
0Easy Iron, Extra Rinse, Prewash/Pre Treat
Additional option settings.
Indicator on = setting is active.
8Start/Pause
▯starts or pauses the selected cycle
▯lit steady - cycle running, can be paused
▯blinking - settings can be changed; cycle can
be started; door is locked (water may be hot);
cycle is in Pause mode
@Cycle Selector for selecting a cycle and on/off
switch;
turns in both directions.
HDisplay field for settings and information.
(Selectable temperature ranges
Extra hot, Hot, Warm, Cold
0Selectable spin speed ranges
High, Medium, Low, No spin
84 Digit Display:
▯delay start-time
adjustable in 1h (hours) steps to 24 hours
▯cycle duration
for example 2:40 (hours:minutes)
@Cycle status sequence
HChild lock
PIndicator lamps for additional option settings

 #+
3

18
Laundry
Preparing the laundry
NOTICE: Damage to the appliance/fabrics
Foreign objects (e.g. coins, paper-clips, needles, nails)
may damage the laundry or components in the washing
machine.
Therefore, note the following tips when preparing your
laundry:
▯Empty all pockets to ensure no loose debris (coins,
keys, other hard objects) are placed in the washer
drum.
▯Close any fasteners (such as zippers and hooks) that
could cause laundry to catch or become entangled.
▯Remove any foreign objects or non-washable parts.
▯Turn trousers and knitted wear inside out prior to
washing.
▯Place small items (such as socks and handkerchiefs)
and underwired bras into a mesh bag prior to washing.
Sorting the Laundry
Sort laundry items according to color, degree of soiling
and recommended wash temperature range.
Wash white items separately from colored items.
Otherwise, white items may tend to become grey.
Observe laundry care labels
Check the care labels on each laundry item prior to
washing. Choose an appropriate wash cycle that does
not exceed the temperature recommended.
Determining degree of soiling
▯Light soiling
No visible soiling or stains, but may have absorbed
some body odor. This could include light weight
summer clothing such as T-shirts, shirts, or blouses
worn for only one day. Also to freshen bed linen or
guest towels.
▯Normal soiling
Visible soiling and/or a few light stains. This could
include clothing such as T-shirts, shirts, or blouses that
have been sweated in or worn several times. Also tea
towels, hand towels or bed linen used for up to one
week. Net curtains (without nicotine stains) that have
not been washed for up to a half year.
▯Heavy soiling
Visible soiling and stains. This could include kitchen
towels, fabric napkins, baby bibs, children’s outer
clothing or football jerseys and shorts stained with
grass and/or earth. Also could include working clothes
such as overalls and jeans and other clothing worn for
outside work and activities such as gardening, home
and yard maintenance or worn during sports activities.
H[WUDKRW KRW ZDUP FROG

19
Identifying and treating stains
Removing stains
▯Remove/pretreat stains as soon as possible after they
have occurred.
▯Dab with a soapy solution. Do not rub.
▯Select an appropriate wash cycle and wash the item.
Several washing cycles may be required in order to
remove stubborn or dried-in stains.
Laundry detergents and additives
Adding the correct amount of detergent
9WARNING
WARNING
To avoid risk of poisoning, keep detergents and
cleaning products out of the reach of children.
Avoid overuse of detergent.
Measure out the detergent according to:
▯The amount of laundry.
▯The degree of soiling.
~Sorting the Laundry; Page 18
▯The water hardness. This information can be obtained
from your local water authority. Soft water requires less
detergent.
Too much detergent
▯Excessive foam will reduce washing agitation and
cause poor washing and rinsing results.
▯Not environmentally compatible (wastes detergent and
is not good for the environment).
Too little detergent
▯Laundry will not be washed clean.
▯Eventually the laundry will take on a grey and hard
appearance. Greyish-brown grease spots may stain
the laundry, heating elements may begin to calcify.
The fabric care label is important for selecting the correct
detergent, temperature and treatment of the laundry.
▯Standard detergent with optical brighteners
Suitable for boil-washable white laundry made from
linen or cotton
Program: Cottons / Cold - Extra hot
▯Detergent for colours without bleach or optical
brighteners
Suitable for coloured laundry made from linen or
cotton
Program: Cottons / Cold - Hot
▯Detergent for colours/delicates without optical
brighteners
Suitable for coloured laundry made from easy-care
fibres, synthetic fibres
Program: Perm Press / Cold - Hot
Oils and grease: normal body skin oil,
cooking oils/fats, sauces, mineral oil, or
wax (containing fat/oil). Treatment: scrape
residue from fabric. Pretreat. Wash using
hottest water safe for the fabric. For heavy
stains, apply non-flammable dry cleaning
fluid to back of stain, replacing towels
under stain frequently. Rinse thoroughly
and wash using hottest water safe for the
fabric.
Beverages and juices: tea, coffee, red
wine, fruit, vegetables. Treatment: Pretreat
stain. Wash using cold water.
Proteins and carbohydrates: blood, egg,
milk, starch. Treatment: Rinse immediately
in cold water. If stain remains, soak in cold
water with an enzyme prewash.
Soot, earth, sand (pigments), red clay
(such as soiling of tennis clothing). Brush
off residue if present. Pretreat or soak with
a laundry product containing enzymes.

20
▯Detergent for delicates
Suitable for delicate, fine fabrics, silk or viscose
Program: Delicates / Cold - Hot
▯Detergent for woollens
Suitable for wool
Program: Woolens / Handwash / Cold - Warm
Saving energy and detergent
For light and normal soiling, you can save energy (lower
washing temperature) and detergent.
NOTICE: When measuring the amount of all detergents/
additives/care products and cleaning agents, please
always check the manufacturer's instructions and
information.
Cycle selection table
Saving Soiling/note
Reduced tem-
perature and
detergent
quantity as
per the rec-
ommended
dosage
Light e.g.:
▯Light summer/sports clothing
(worn for a few hours)
▯T-shirts, shirts, blouses (worn
for up to one day)
▯Guest bed linen and hand
towels (used for one day)
No visible dirt or stains. Clothing
has taken on some body odour.
Temperature
as per the
care label and
detergent
quantity as
per the rec-
ommended
dosage for
heavy soiling
Normal e.g.:
▯T-shirts, shirts, blouses (sweat
soaked, worn a few times)
▯Towels, bedding (used for up
to one week)
Visible dirt or a few light stains.
Heavy
Dirt and/or stains clearly visible,
e.g. tea towels, baby items, work
clothing
Cycles max.
Load
up to:
selectable cycle settings,
default settings (bold)
Type of laundry additional cycle settings ;
Information
Temperature Spin speed
Cotton Normal full load Extra hot
Hot
Warm
Cold
High
Medium
Low
No spin
Sturdy fabric, cotton or linen
fabric that withstands very hot
water
Easy Iron, Extra Rinse, Pre-
wash/Pre Treat
Cotton
Heavy Soil
Cotton
Light Soil
1/2
load
Sanitary full load Extra hot
Hot
Warm
Cold
High
Medium
Low
No spin
Sturdy fabric, cotton or linen
fabric that withstands very hot
water
Easy Iron, Extra Rinse, Pre-
wash/Pre Treat ;
longer wash and rinse with
more water for especially sen-
sitive skin
Jeans 1/2
load
Hot
Warm
Cold
High
Medium
Low
No spin
dark cotton textiles and dark
easy-care textiles;
Wash textiles inside-out.
Easy Iron, Extra Rinse, Pre-
wash/Pre Treat
Quick Wash 30
min
1/2
load
Hot
Warm
Cold
High
Medium
Low
No spin
Easy-care fabrics made of cot-
ton, linen, synthetic fibres or
blended fabrics ;
suitable for slightly-soiled laun-
dry