Bosch WAQ283S0GB User manual

1 2 3 4 5 6
1 - 24 (Ready in) End of programme after ...
Status displays Programme sequence displays:
Wash, rinse, spin, end
Rinse Hold without final spin
ª¥Childproof lock apage 5
End of programme when ...
... $Start/Reloadflashes and -¯-appears on the display panel.
Note: If display panel li ghting is switched off, press any button aEnergy
saving mode, page 5.
Interrupting the programme
Programmes at high temperatures:
– Cool washing: Select 2Rinse/Spin .
– Press $Start/Reload.
Programmes at lower temperatures:
– Select 2Rinse/Spin (deactivate Aqua P lus =button) or
Drain >.
– Press $Start/Reload.
Changing the programme if ...
... you have selected the wrong progr amme by mistake:
– Reselect the programme.
– Press $Start/Reload. The new programme starts from the beginning.
Reloading laundry if ... apage 5
... Press $Start/Reload;§is displayed on the displa y panel. If ǯis lit, the washing machine door ca nnot be opened.
Press $Start/Reload.
Correct installation according to the separate
installations actions.
Checking the machine
– Never use a damaged machine!
– Contact customer service!
Connecting the mains plug
Make sure your hands are dry!
Handle the plug only!
Turning on the tap
Compartment II: detergent for the main wash, water softener,
bleach, stain remover
Sorting and loading laundry
Follow the manufacturer's care in formation!
Sort laundry according to the label's indications.
And according to type, colour, soiling and temperature.
Do not exceed the max imum load aPage 7.
Observe important information! aPage 6
Wash laundry of different siz es in the same wash programme.
Close the door. Take care not to tra p items of laundry between the washing machine door a nd
seal.
Add detergent and care products
Measure detergent according:
amount of laundry, soiling, water hardness (ask your wat er supply company) and
manufacturer's instructions.
For models without insert for liq uid detergent:
Pour liquid detergent into the appropriate d ispenser and place in the drum.
Your washing machine
Congratulations on having opted for a mo dern, high-quality domestic appliance
manufactured by Bosch. This washing machine is distinguished by its economical
energy consumption.
Each machine that leaves our factory has been inspected thoroughly to en sure that it
functions properly and is in perfect condition.
For further information o n our products, accessories, spares and services, cons ult our
website www.bosch-home.com or con tact any of our customer service centres.
You can find the contact details fo r your nearest after-sales service here or in the after-
sales service directory (depending on model) .
–GB 0844 8928979 (calls from a BT landline will be c harged at up to 3 pence
per minute. A call set-up fee of up to 6 pence may apply)
–IE 01450 2655
Environmentally friendly waste disposa l All packaging must be disposed of in acc ordance with environmental guidelines.
This appliance is certi fied in accordance with European Directive 2002/96/CE on the
waste electrical and electronic eq uipment (WEEE).
This directive provides the framework for t he EU-wide collection and reuse of used
appliances.
Intended use
Contents Page
ʋIntended use ................................................................................ .......1
ʋProgrammes ........................................................................................ 1
ʋSetting and adjusting the programme ........................................... 3
ʋWashing ........................................................................................... 3/4
ʋAfter washing ...................................................................................... 4
ʋIndividual settings .................................... ......................................5/6
ʋImportant information ........................ ............................................... 6
ʋOverview of programmes ................................................................ 7
ʋSafety instructions ........................................................... ..................8
ʋConsumption values ................................................. ........................8
ʋCare and cleaning ............................................................................. 9
ʋInformation on the display panel ...................... ..............................9
ʋMaintenance .................................................................................... 1 0
ʋWhat to do if ... ................................................................................ 11
Protection of the environment/Conservation tips
– Always fill the washing machine with a maximum amount of
laundry for the relevant pr ogramme.
– Wash normally s oiled laundry without a pre-w ash.
– Instead of CottonsLF90 °C, c hoose the programme
Cottons LF60 °C with the additional function EcoPerfe ct ć.
Comparable cleaning result was significantly lower energy
consumption.
– Measure the d etergent according to the manufacturer's
instructions and water hardness .
– If the la undry is then dried in the tumble drye r, select spin speed
according to instructions of dryer manufacturer.
Preparation Before the first wash,
run a wash cycle with no laun dry in the machine aPage 9.
Setting** and adjusting programmes
Programmes
Detailed overview of programmes apa ge 7.
Spin speed can be selected in dividually, irrespective of the
selected programme and p rogramme progress.
Cottons LFhard-wearing fabrics
Prewash 7hard-wearing fabrics, prewash
Mixed Load /Different types of laundry
Super Quick 15’ 6Short programme
2Rinse/Spin Laundry washed by hand, Aqua Plus =button acti-
vated; if only using the sp in cycle, deactivate the but-
ton
Drain >Drain rinsing water with Rinse H oldc(without final
spin)
Jeans Dark laundry
ÿWool Hand/machine washable w ool
Delicate/Silk Delicate washable fa brics
Easy-Care Isynthetic fabrics Washing
1
2
Removing the washing
Open the washing machine door and remove the washing.
If Rinse Hold (without fi nal spin) is active: turn the programme s elector to
Drain >or select the spin speed.
Choose $Start/Reload.
– Remove any foreign objects. Risk of ru sting.
– Leave the washing machine door and detergent door op en
so that any resid ual water can evaporate.
Turn the tap off
Not required for Aqua-Stop m odels aRefer to Installation instructions.
Switching off
Turn the programme selector to Off .
Washing
Compartment ~: Fabric softener, bleac h
Compartment I: Detergent for prewash
ʋfor domestic use only,
ʋfor washing machine-washable fa brics and
hand-washable wool in dete rgent solution,
ʋto be operated with cold or cold and hot (max. 60 ºC)
drinking water, depending on model , and commercially
available detergents and care products which are suita-
ble for use in wa shing machines.
.
– Follow the safety instructions on page 8!
– Do not leave children unattended near the
washing machine.
– The washing machine is not to be used by
children or persons n ot familiar with the
operating instructions.
– Keep pets away fr om the washing machin e.
Dilute viscous fabric softener and fabric conditioner with water.
This prevents blockages.
Individual settings
ʑOption button (Ready in)
When a programme is selected, its duration is displayed. You can delay the end of the programme before it begins. The
ready in-time can be set in increments of one hour up to a maximum of 24 hours. Press the (Ready in) button until
the required number of hours is displayed (h = hour). Choose $Sta rt/Reload. Once the programme has begun , no
further adjustment is possible.
ʑ(spin speed in rpm/ Rinse Hold (without final spin))
You can change the displayed spin spee d or choose Rinse Hold (without final spin, laundry soaks in the last rinsing
water, display panel - - - ). The max imum selectable spin speed depends on the model and which programme is
currently selected.
ʑAdditional functions aOverview of programmes, p age 7
SpeedPerfect iFor washing in a shorter time with a washing o utcome comparable to that of the
standard programme. Maximum load aOverview of programmes, page 7.
EcoPerfect ćFor saving energy with a w ashing performance comparable to that of the standard
programme.
Reduced Ironing SSpecial spin sequence with subsequent fluffing. Gentle final spin: residual mo isture in
the laundry slightly increased.
Aqua Plus =Increased water level and additional rinse cyc le, extended washing time. For areas
with very soft water or for further enhancing the spin result.
ʑChildproof lock
ª¥in the display panel You can lock the washing mach ine to prevent the functions you have set from being
changed inadvertently.
To activate: press and hold the $Start/Reload button for a pprox. 5 seconds after
the programme has started. ª¥appears in the display panel for a pprox. 5 seconds,
then the Finish-in tim e is shown again.
To deactivate: press and ho ld the $Start/Reload button for approx .
5 seconds.
Note: If a button is pressed when the childproof lock is active, ª¥lights up for
approx. 5 seconds, then the Finish-in time is displayed again.
ª¥lights up continouously if th e programme selector is adjusted w hen the Childlock
is active.
ʑReloading
§in the display panel Press $Start/Reload if you w ant to add additional items of laundr y after the
programme has started. The mac hine checks whether reloading is possible.
§lits: reloading is possible.
ǯflashes: wait until §lights.
Note: do not open the door until §is lit.
ǯ: it is not possible to relo ad.
Note: for safety reasons, the washing machine door remains locked w hen the water
level and/or temperature is h igh, or during spinning.
To continue the programme, p ress the $Start/Reloadbutton.
ʑEnergy saving mode
The display panel lighting goes out after a few minutes , $Start/Reload flashes. Press any button to switch on the
lighting.
ʑ$Start/Reload
To start the programme or to subsequent ly load additional laundry, and to activate/deactivate the ch ildproof lock.
Individual settings z
ʑSignal
Important information
Protecting the laundr y and the machine
– When determining the dosage of all washin g powders, additives and cleaning agents, you must follow the
manufacturer's instructions..
– Empty all pockets
– Check for metal items (paper-clips, etc.).
– Wash delicates in a laun dry bag (tights, curtains, underwired bras).
– Fasten zips, do up any buttons.
– Brush sand out of pockets and colla rs.
– Remove curtain fittings or place in the laundry bag.
Laundry with varying degrees of soiling
Wash new items of clothing separately.
light Do not prewash. If required, cho ose the additional function SpeedPerfect iPre-treat any stains as necessary.
intense wash Load less laundry. Choose a programme with a prewash.
Soaking Load laund ry of the same colou r.
Pour soaking agent/detergent into compartment II in accordance wi th the manufacturer's instructions. Turn the
programme selector to Cott ons LF30 °C and press $Start/Reload. After approx. 10 minutes, press $Start/
Reload to pause the programme. Once the requireds oaking time has elapsed, press $Start/Reloadagain to contin ue
the programme, or select a different pr ogramme.
Starch Laundry should n ot be treated with fab ric softener.
Starching is possible in all wash programmes if liquid starch is used. Pour the starch in accordan cewi th the
manufacturer's instructions into fabric softener compartment ~(rinse first if necessary).
Dyeing / Bleaching
Dye should only be used in norma l household quantities. Salt may damage stainless steel. A lways follow the dye
manufacturer's instructions. Do not use th e washing machine for bleaching clothes.
Insert for liquid detergent depending on model
Position the insert for dispensing liquid detergent:
– Remove the detergent drawer com pletely apage 9
– Slide the insert forwards and click into place.
Do not use the insert (slide upwards): fo r gel detergents and washing powder,
for programmes with Pr ewash 7and end time option.
Set to •1 step, the display
panel lights up
press and
hold +1 step, release
set to •
setting the
volume*
setting the
volume*
1 step
* if necessary, select the func tion several times
1. Activating the mode
for setting the signal
volume
2. Setting the volume
for...
Button signals Information signals jj
1400
1200
800
400
Rinse Hold
1400
1200
800
400
cRinse Hold
direct
3
Detergent drawer with
compartments I,II,~
Door
Drum
Control panel
Service door
Display panel /
option buttons
Additional
functions
Start /
Reload
Programme selector for
switching the machine on
and off and for selecting the
programme. Can be turne d
in either direction.
**If ª¥flashes in th e display panel,
the childproof lock is active
aDeactivate childproof lock,
page 5.
Additional functions and option
buttons aIndividual settings,
page 5.
Press $Start/Reload
All buttons are sensitive an d need
only to be touched light ly. Press and
hold the (Ready in) option button
for an automatic run through all
setting options.
Programme selector
1 2 3 4 5 6
Insert for liquid detergent (depending on model) ap age 6
Do not switch on th e washing machine until you have read these
instructions and the separate Install ation instructions!

7
Overview of programmes aRefer to the table of co nsumption values on page 8, and advice and warnings on page 6.
Programmes °C max. Type of laundry Additional functions; Information
Cottons LF30, 40, 60, 90 °C 8 kg/
4 kg*
hard-wearing fabrics, cottons or linen that can be washed at 90°C
SpeedPerfect i*, EcoPerfect ć, Reduced Ironing S,
Aqua Plus =Prewash 740 °C
Easy-Care I30, 40 °C
3.5 kg
easy-care cotton, linen, synthetic or blended fabrics SpeedPerfect i, EcoPerfect ć, Reduced Ironing S,
Aqua Plus =Mixed Load /40 °C cotton or synthetic fa brics
SpeedPerfect i, EcoPerfect ć, Reduced Ironing S,
Aqua Plus =;
different types of laundry can be w ashed together
Jeans 40 °C dark cot ton and dark synthetic fabrics
SpeedPerfect i, EcoPerfect ć, Reduced Ironing S,
Aqua Plus =;
reduced rinse and final spin cycle
Delicate/Silk 30 °C
2 kg
for delicate fabrics, e.g., silk, s atin, synthetic fibres or blended fabrics (e.g. cur tains)
SpeedPerfect i, EcoPerfect ć, Reduced Ironing S,
Aqua Plus =:
no spin between rinse cycles
ÿWool cold, 30 °C hand/machine washable wool
particularly delicate wash programme to avoid shrinkage of laun - dry; longer programme breaks (fabrics rest i n the detergent solution)
Super Quick 15’ 630 °C s ynthetic cotton, linen, synthetic fibres or blended
fabrics
short programme of a pprox. 15 minutes, suitable for lightly soiled laundry
Additional programmes 2Rinse/ Spin , Drain >*reduced load with additional functi onS peedPerfect i.
For programmes without prewash , add detergent to compartment II. For prewash programmes, distribute the detergent between compartments Iand II.
9201 / 9000734806
9000734806 WAQ283S0GB /...
Robert Bosch Hausgeräte Gm bH
CarläWery Str. 34
81739 Munich / Germany
8
Safety instructions
– Carefully read the instruction manual and the information enclo sed, anda ct accordingly.
– Keep the machine's documentation for future refer ence.
Risk of electric shoc k! – Never pull the cable to disconnect the mains plug!
– Never insert/disconnect the mains plug with damp hands.
Danger to life! For worn-out appliances:
– Disconnect the mains plug.
– Sever the mains cable and discard along w ith the plug.
– Destroy the lock on the washing mach ine door. This will prevent children from
locking themselves in and risking their lives.
Danger of suffocation! – Keep pa ckaging, film and packaging parts out of the reach of children.
Risk of poisoning! – Keep detergents and care products o ut of the reach of children.
Risk of explosion! – Items of laundry pretrea ted with cleaning agents containing solvents, e.g. stain
remover/cleaning solvent may lead to an explosion af ter being loaded into the
washing machine.
Rinse items of laundry thoroughly by hand beforehand.
Risk of injury! – The washing machine do or may become very hot.
– Be careful when draining hot detergent s olution.
– Do not climb onto the wash ing machine.
– Do not lean on the open washing mach ine door.
– Do not reach into the dru m if it is still rotating.
– Be careful when opening the detergent dr awer while the machine is in operation.
Consumption values depending on mod el
Programme Load Electricity*** Water*** Programme
duration***
Cottons 30 °C* 8 kg 0.40 kWh 68 l 145 min
Cottons 40 °C* 8 kg 1.05 kWh 68 l 155 min
Cottons 60 °C* 8 kg 1.15 kWh 68 l 165 min
Cottons 90 °C 8 kg 2.30 kWh 80 l 155 min
Easy-Care 40 °C* 3.5 kg 0.64 kWh 55 l 103 min
Mixed Load 40 °C 3.5 kg 0.54kW h 47 l 60 min
Delicate/Silk 30 °C 2 kg 0.19 kWh 34 l 41 min
Wool 30 °C* 2 kg 0.17 kWh 39 l 40 min
* Programme setting for testing in accordance with valid sta ndardE N60456.
Note on comparative tests: For testing the test programmes, wash the specified load using the maximum spi ns peed.
Programme Additional
function Load Annual energy consumption
Annual water
consumption
Cottons40/60 °C EcoPerfect ć** 8/4 kg 179 kWh 8700 l
** Programme setting for tes tinga nden ergy labelling in accordance with EU directive 2010/30/EU with cold water (15 ºC).
*** The values deviate from the indicated values d epending on water pressure, hardness, and inlet temperature, a mbient tem-
perature, type, amount and soiling o f the laundry, detergent used, fluctuations in the powe r supply and selected additional
functions.
9
Care and cleaning
Before the first wash
Do not put laun dry in the machine! Turn on the tap. Pu t into compartment II:
– approx. 2 litre s of water
– detergent (measure ac cording to the manufacturer's instructions for lightl y soiled laundry and water hardness)
Turn the programme sel ector to Cottons LF60 °C,additional fun ction SpeedPerfect iand press $Start/Reload .
At the end of the programm e, turn the programme selector to Of f.
Machine housing, control panel
– Remove detergent and cleaning agent residue.
– Wipe with a soft, damp cloth.
– Do not wash the machine with a jet of water!
Cleaning the detergent drawer ...
... if it contains detergent or fabric softener residues.
1. Pull out, press insert down and remove dra wer completely.
2. To remove the insert: press upw ards from below with your fi nger.
3. For models with insert fo rl iquid detergent:Slide the insert upwards and remove it fr omt he back.
4. Clean the detergent d ispenser tray and inserts with water and a brush and dry them.
5. Attach the insert and engage (con nect the cylinder to the guide pin).
6. Push in th e detergent drawer.
Leave the detergent drawer open so that any residual water can evaporate.
Drum
Leave the washing machine door open so thatthe drum can dry out.
Forrust stains, usechlorine-freecleaningagent,not steelwool.
Descaling Ensure th ere is no laundry in the machine!
This will not be necessary if the correctdosage of detergent is used. If it is, descale the appliance according to the
manufacturer's instructions. Descaling products can beacqu ired onthe website or from customer services aInstallation
instructions.
Emergency release (e.g. in the even t of a power cut)
The programme continues to run when the power has been restored. However, if the laundry has to be r emoved, the
washing machine door can be opened as follo ws:
Risk of scalding!
The detergent solution and laundry may be hot. Let it cool.
Do not reach into the drum if it is still rotating.
Do not open the washing machine door if water can be seen through the glass.
1. Turn the progr amme selector to Off and disc onnect the mains plug.
2. Drain the detergent solution apage 10.
3. Pull the emerge ncy release downwards with a tool and rel ease.
The washing ma chine door can then be opened.
Information on the display panel depending on model
§:³±Close the washing machine door properly; laundry may be caugh t.
§:³Å,
§:ÉTurn on the (cold water) tap fully, supply hose kinked or trapped;
Clean the filter apage 10, water pressure too lo w.
§:³µ– D etergent solution pump blocked; Clean the detergent solution pump apage 10.
– Drainage hose / waste pipe blo cked;C lean the drainage hose at the siphon apage 10.
– Heavy foam build-up apage 11, status indicator Wa sh flashes.
§:´Water in the base tub, appliance leaking. Call customer s ervices!
©:³¯– Open the (hot w ater) tap fully.
– Inlet hose kinked/trapped.
– Water pressure too low. Clean the filter apage 10.
– Hot water hose not connected; appliance will operate using cold water only. Ignore information, only for first
wash cycle.
ª¥Childproof lock activated: to d eactivate apage 5.
–Risk of electric shock! Disconnect the mains plug.
–Risk of explosion! Do not use solvents.
9
10
Maintenance
Detergent solution pump
Turn the programme selector to Off a ndd isconnect
the mains plug.
1. Using a screwdriver or the insert f orli quidd etergent
(depending on model), open and r emove the service flap.
2. Remove the folding gutte r and place a large enough container underneath.
3. For models with a drainage hose: Remove the dr ainage hose from the retainer an d pull it
from the housing.
Remove the sealing cap, allow the detergent solution to flow out into the container. Repla ce
the sealing cap and place the drainage hose in the retainer.
3* For models without a drainage hose: Carefully unscrew the pump c over 180° oru ntil the
detergent solution begi ns to flow out on the folding g utter. When the container is full, close
the pump cover and empty the c ontainer. Repeat the above steps until all the detergent
solution has completely drained out.
4. Carefully unscrew the pump c over (there may be residual water).
5. Clean the interior, pump cover threa d and pump housing (the impeller in the detergent
solution pump must r otate).
6. Replace the pump co vera nd screw it tightly.
7. Return the dra inage hose (depending on model) and the folding gutter to their start pos ition.
8. Place the service flap back on and close.
To prevent unused detergent from flowing s traight into the drain during the next wash:
Pour 2 li tres of water into compartment II and then sta rt the Drain >programme.
Drainage hose at the siphon
Turn the programme selector to Off a nd disconnect the mains plug.
1. Loosen the hose clam p, carefully remove the drainage hose (residual water).
2. Clean the drainage hose and siphon connecting pi ece.
3. Reattach the drainage h ose and secure the connection with the hose clamp.
Filter in the water supply
Risk of electric shock!
Do not immerse the A qua-Stop safety device in water (c ontains an electric valve).
Reduce the water pressure in the supply hose:
1. Turn off the tap.
2. Select any programme ( except 2Rinse/Spin // Drain >).
3. Choose $Start/Reload. Let the programme run f or approximately 40 seconds.
4. Turn the programm e selector to Off. Disconnect the mains p lug.
Clean the filter:
5. Disconnect the hose from th e tap.
Clean the filter using a small b rush.
and/or for Standard and Aqua-Secur e models:
Remove the hose on the rear of the appliance.
Remove the filter with pliers an d clean.
6. Connect the hose an d check for leaks.
–Risk of burning!
Allow the detergent s olution to cool.
– Turn off the tap.
11
What to do if...
ʑWater is leaking out – Attach/replace the drainage hose correctly.
– Tighten the screw connection of the supply hose.
ʑNo water supply.
Detergent not dispensed.
–$Start/Reload not selected?
– Tap not turned on?
– Filter blocked? Clean the filter apag e 10.
– Supply hose kinked or trapped?
ʑThe appliance door will not
open.
– Safety function active. Programme stopped? apage 4.
–Rinse Hold (without fina l spin) selected? apage 3, 4.
– Can be opened by emergency release only? apage 9.
– Door locked after the washing machine is s witched off: Switch on the washing
machine and wait for 5 seconds .
ʑThe selected programme does
not start.
–$Start/Reloador (Ready in) time se lected?
– Washing machine door closed?
– Childproof lock active? Deactivate apage 5 .
ʑDetergent solution is not
drained.
–Rinse Hold (without fina l spin) selected? apage 3, 4.
– Clean the detergent solution pump apage 10.
– Clean the waste pipe and/or drainage hose.
ʑNo water can be seen in the
drum.
– Not a fault. Water remains insi de below the visible area.
ʑSpin result not satisfactory.
Laundry wet/too damp.
– Not a fault. Spin control system has stopped the spin cycle. Uneven distribu tion of
laundry.
Distribute large and small items of la undry evenly in the drum.
–Reduced Ironing Sselected? apage 5.
– Selected speed too low? apage 5.
ʑProgramme duration changes
suddenly during operation.
– Not a fault. The program time can vary a ccording to the distribution of laundr y, with
it therefore being possible for the di splay panel to show adjustments in the
duration.
ʑSpin cycle performed several
times.
– Not a fault. The balance control system ha sd etected an imbalance and is
attempting to redress this by repeating the spin.
ʑResidual water in the
compartment for care products.
– Not a fault: the action of the care prod uct is not affected.
– Clean the compartment if necessary apage 9.
ʑOdour formation in the washing
machine.
– Run programme Cottons LF90 °C without laundry. Use s tandard detergent.
ʑStatus display Wash flashin g.
Appliance has detected a
detergent overload.
– Too much detergent used?
If foam is escaping f rom the detergent drawer: mix 1 tablespoon of fabric softener
with ½ litre of water and pour into compartment II (not with outdoor or down
fabrics).
– Reduce the detergent dosage for the next wa sh cycle.
ʑIntense noise formation,
vibrations and "wandering"
during the spin cycle.
– Are the appliance feet fixed?
Secure the appliance feet aIn stallation instructions.
– Transportation safety devices removed?
Remove transportation safety devices aInstallation instructions.
ʑDisplay panel/indicator lamps
remain turned off while the
machine is working.
– Energy-saving mode apage 5.
– Power cut?
– Fuses triggered? Reset/change the fuse.
– If the fault occurs repeatedly, call customer services.
ʑProgramme sequence longer
than usual.
– Not a fault. Unbalanced load detection system adjusts imbalance by repeated ly
distributing the laundry.
– Not a fault: foam detection system active; a dds an additional rinse cycle.
ʑDetergent residues on t he
laundry.
– Occasionally, phosphate-free detergents contain water-insoluble residues.
– Select 2Rinse/Spin or brush out the laundry after washi ng.
If you cannot correct a fa ult yourself or if a repair is necessary:
– Turn the programme selector to Off and remove the mains plug from th e socket.
– Turn off the water supply and call customer ser vices aInstallation instructions.
Washing machine
en Instruction manu al

1 2
1 - 24 (Ready in) End of programme after ...
Status displays Programme sequence displays:
Wash, rinse, spin, end
Rinse Hold without final spin
ª¥Childproof lock apage 5 $¯a2$2=>$$a$§ǯ$Correct installation according to the separate
installations actions.
Checking the machine
– Never use a damaged machine!
– Contact customer service!
Connecting the mains plug
Make sure your hands are dry!
Handle the plug only!
Turning on the tap
Compartment II: detergent for the main wash, water softener,
bleach, stain remover
aa
Close the door. Take care not to trap items of laund
Your washing machine
Congratulations on having opted for a modern, high-quality domestic appliance
manufactured by Bosch. This washing machine is distinguished by its economical
energy consumption.
Each machine that leaves our factory has been inspected thoroughly to ensure that it
functions properly and is in perfect condition.
For further information on our products, accessories, spares and services, consult our
website www.bosch-home.com or contact any of our customer service centres.
You can find the contact details for your nearest after-sales service here or in the after-
sales service directory (depending on model).
–GB 0844 8928979 (calls from a BT landline will be charged at up to 3 pence
per minute. A call set-up fee of up to 6 pence may apply)
–IE 01450 2655
Environmentally friendly waste disposal All packaging must be disposed of in accordance with environmental guidelines.
This appliance is certified in accordance with European Directive 2002/96/CE on the
waste electrical and electronic equipment (WEEE).
This directive provides the framework for the EU-wide collection and reuse of used
appliances.
Intended use
Contents Page
ʋIntended use .......................................................................................1
ʋProgrammes ........................................................................................1
ʋSetting and adjusting the programme ...........................................3
ʋWashing ...........................................................................................3/4
ʋAfter washing ......................................................................................4
ʋIndividual settings ..........................................................................5/6
ʋImportant information ....................................................................... 6
ʋOverview of programmes ................................................................ 7
ʋSafety instructions .............................................................................8
ʋConsumption values .........................................................................8
ʋCare and cleaning .............................................................................9
ʋInformation on the display panel ....................................................9
ʋMaintenance .................................................................................... 10
ʋWhat to do if ... ................................................................................ 11
Protection of the environment/Conservation tips
– Always fill the washing machine with a maximum amount of
laundry for the relevant programme.
– Wash normally soiled laundry without a pre-wash.
– Instead of CottonsLF90 °C, choose the programme
Cottons LF60 °C with the additional function EcoPerfect ć.
Comparable cleaning result was significantly lower energy
consumption.
– Measure the detergent according to the manufacturer's
instructions and water hardness.
– If the laundry is then dried in the tumble dryer, select spin speed
according to instructions of dryer manufacturer.
Preparation a
Programmes
Detailed overview of programmes apage 7.
Spin speed can be selected individually, irrespective of the
selected programme and programme progress.
Cottons LFhard-wearing fabrics
Prewash 7hard-wearing fabrics, prewash
Mixed Load /Different types of laundry
Super Quick 15’ 6Short programme
2Rinse/Spin Laundry washed by hand, Aqua Plus =button acti-
vated; if only using the spin cycle, deactivate the but-
ton
Drain >Drain rinsing water with Rinse Holdc(without final
spin)
Jeans Dark laundry
ÿWool Hand/machine washable wool
Delicate/Silk Delicate washable fabrics
Easy-Care Isynthetic fabrics >$a
Compartment ~: Fabric softener, bleach
Compartment I: Detergent for prewash
ʋfor domestic use only,
ʋfor washing machine-washable fabrics and
hand-washable wool in detergent solution,
ʋto be operated with cold or cold and hot (max. 60 ºC)
drinking water, depending on model, and commercially
available detergents and care products which are suita-
ble for use in washing machines.
.
– Follow the safety instructions on page 8!
– Do not leave children unattended near the
washing machine.
– The washing machine is not to be used by
children or persons not familiar with the
operating instructions.
– Keep pets away from the washing machine.
ʑ$ʑʑaiaćS=ʑª¥$ª¥$ª¥ª¥ʑ§$§ǯ§§ǯ$ʑ$ʑ$
z
ʑiLF$$$~a7
jj
c
~
Display panel /
option buttons
Additional
functions ª¥aa$Programme selector
1 2
Insert for liquid detergent (depending on model) apage 6
Do not switch on the washing machine until you have read these
instructions and the separate Installation instructions!

3 4
ª¥aEnd of programme when ...
... $Start/Reloadflashes and -¯-appears on the display panel.
Note: If display panel lighting is switched off, press any button aEnergy
saving mode, page 5.
Interrupting the programme
Programmes at high temperatures:
– Cool washing: Select 2Rinse/Spin .
– Press $Start/Reload.
Programmes at lower temperatures:
– Select 2Rinse/Spin (deactivate Aqua Plus =button) or
Drain >.
– Press $Start/Reload.
Changing the programme if ...
... you have selected the wrong programme by mistake:
– Reselect the programme.
– Press $Start/Reload. The new programme starts from the beginning.
Reloading laundry if ... apage 5
... Press $Start/Reload;§is displayed on the display panel. If ǯis lit, the washing machine door cannot be opened.
Press $Start/Reload.
Sorting and loading laundry
Follow the manufacturer's care information!
Sort laundry according to the label's indications.
And according to type, colour, soiling and temperature.
Do not exceed the maximum load aPage 7.
Observe important information! aPage 6
Wash laundry of different sizes in the same wash programme.
Close the door. Take care not to trap items of laundry between the washing machine door and
seal.
Add detergent and care products
Measure detergent according:
amount of laundry, soiling, water hardness (ask your water supply company) and
manufacturer's instructions.
For models without insert for liquid detergent:
Pour liquid detergent into the appropriate dispenser and place in the drum.
ʋʋʋʋʋʋʋʋʋʋʋʋʋʋLFLFćBefore the first wash,
run a wash cycle with no laundry in the machine aPage 9.
Setting** and adjusting programmes
aLF7/62=>cÿIWashing
1
2
Removing the washing
Open the washing machine door and remove the washing.
If Rinse Hold (without final spin) is active: turn the programme selector to
Drain >or select the spin speed.
Choose $Start/Reload.
– Remove any foreign objects. Risk of rusting.
– Leave the washing machine door and detergent door open
so that any residual water can evaporate.
Turn the tap off
Not required for Aqua-Stop models aRefer to Installation instructions.
Switching off
Turn the programme selector to Off.
Washing
~ʋʋʋ
Dilute viscous fabric softener and fabric conditioner with water.
This prevents blockages.
ʑ$ʑʑaiaćS=ʑª¥$ª¥$ª¥ª¥ʑ§$§ǯ§§ǯ$ʑ$ʑ$
z
ʑiLF$$$~a7
jj
c
3
Detergent drawer with
compartments I,II,~
Door
Drum
Control panel
Service door
Start /
Reload
Programme selector for
switching the machine on
and off and for selecting the
programme. Can be turned
in either direction.
**If ª¥flashes in the display panel,
the childproof lock is active
aDeactivate childproof lock,
page 5.
Additional functions and option
buttons aIndividual settings,
page 5.
Press $Start/Reload
All buttons are sensitive and need
only to be touched lightly. Press and
hold the (Ready in) option button
for an automatic run through all
setting options.
Programme selector
3 4
a

56
ª¥a$¯aEnergy
2$2=>$$Reload. The new programme starts from the beginning.
a$§ǯ$aa
ʋʋʋʋʋʋʋʋʋʋʋʋʋʋLFLFćaaLF7/62=>cÿIor to
>$a
~ʋʋʋIndividual settings
ʑOption button (Ready in)
When a programme is selected, its duration is displayed. You can delay the end of the programme before it begins. The
ready in-time can be set in increments of one hour up to a maximum of 24 hours. Press the (Ready in) button until
the required number of hours is displayed (h = hour). Choose $Start/Reload. Once the programme has begun, no
further adjustment is possible.
ʑ(spin speed in rpm/ Rinse Hold (without final spin))
You can change the displayed spin speed or choose Rinse Hold (without final spin, laundry soaks in the last rinsing
water, display panel - - - ). The maximum selectable spin speed depends on the model and which programme is
currently selected.
ʑAdditional functions aOverview of programmes, page 7
SpeedPerfect iFor washing in a shorter time with a washing outcome comparable to that of the
standard programme. Maximum load aOverview of programmes, page 7.
EcoPerfect ćFor saving energy with a washing performance comparable to that of the standard
programme.
Reduced Ironing SSpecial spin sequence with subsequent fluffing. Gentle final spin: residual moisture in
the laundry slightly increased.
Aqua Plus =Increased water level and additional rinse cycle, extended washing time. For areas
with very soft water or for further enhancing the spin result.
ʑChildproof lock
ª¥in the display panel You can lock the washing machine to prevent the functions you have set from being
changed inadvertently.
To activate: press and hold the $Start/Reload button for approx. 5 seconds after
the programme has started. ª¥appears in the display panel for approx. 5 seconds,
then the Finish-in time is shown again.
To deactivate: press and hold the $Start/Reload button for approx.
5 seconds.
Note: If a button is pressed when the childproof lock is active, ª¥lights up for
approx. 5 seconds, then the Finish-in time is displayed again.
ª¥lights up continouously if the programme selector is adjusted when the Childlock
is active.
ʑReloading
§in the display panel Press $Start/Reload if you want to add additional items of laundry after the
programme has started. The machine checks whether reloading is possible.
§lits: reloading is possible.
ǯflashes: wait until §lights.
Note: do not open the door until §is lit.
ǯ: it is not possible to reload.
Note: for safety reasons, the washing machine door remains locked when the water
level and/or temperature is high, or during spinning.
To continue the programme, press the $Start/Reloadbutton.
ʑEnergy saving mode
The display panel lighting goes out after a few minutes, $Start/Reload flashes. Press any button to switch on the
lighting.
ʑ$Start/Reload
To start the programme or to subsequently load additional laundry, and to activate/deactivate the childproof lock.
Individual settings z
ʑSignal
Important information
Protecting the laundry and the machine
– When determining the dosage of all washing powders, additives and cleaning agents, you must follow the
manufacturer's instructions..
– Empty all pockets
– Check for metal items (paper-clips, etc.).
– Wash delicates in a laundry bag (tights, curtains, underwired bras).
– Fasten zips, do up any buttons.
– Brush sand out of pockets and collars.
– Remove curtain fittings or place in the laundry bag.
Laundry with varying degrees of soiling
Wash new items of clothing separately.
light Do not prewash. If required, choose the additional function SpeedPerfect iPre-treat any stains as necessary.
intense wash Load less laundry. Choose a programme with a prewash.
Soaking Load laundry of the same colour.
Pour soaking agent/detergent into compartment II in accordance with the manufacturer's instructions. Turn the
programme selector to Cottons LF30 °C and press $Start/Reload. After approx. 10 minutes, press $Start/
Reload to pause the programme. Once the required soaking time has elapsed, press $Start/Reloadagain to continue
the programme, or select a different programme.
Starch Laundry should not be treated with fabric softener.
Starching is possible in all wash programmes if liquid starch is used. Pour the starch in accordance with the
manufacturer's instructions into fabric softener compartment ~(rinse first if necessary).
Dyeing / Bleaching
Dye should only be used in normal household quantities. Salt may damage stainless steel. Always follow the dye
manufacturer's instructions. Do not use the washing machine for bleaching clothes.
Insert for liquid detergent depending on model
Position the insert for dispensing liquid detergent:
– Remove the detergent drawer completely apage 9
– Slide the insert forwards and click into place.
Do not use the insert (slide upwards): for gel detergents and washing powder,
for programmes with Prewash 7and end time option.
Set to •1 step, the display
panel lights up
press and
hold +1 step, release
set to •
setting the
volume*
setting the
volume*
1 step
* if necessary, select the function several times
1. Activating the mode
for setting the signal
volume
2. Setting the volume
for...
Button signals Information signals jj
1400
1200
800
400
Rinse Hold
1400
1200
800
400
cRinse Hold
direct
~ª¥aa$ 56
a

7
Overview of programmes aRefer to the table of consumption values on page 8, and advice and warnings on page 6.
Programmes °C max. Type of laundry Additional functions; Information
Cottons LF30, 40, 60, 90 °C 8 kg/
4 kg*
hard-wearing fabrics, cottons or linen that can be washed at 90°C
SpeedPerfect i*, EcoPerfect ć, Reduced Ironing S,
Aqua Plus =Prewash 740 °C
Easy-Care I30, 40 °C
3.5 kg
easy-care cotton, linen, synthetic or blended fabrics SpeedPerfect i, EcoPerfect ć, Reduced Ironing S,
Aqua Plus =Mixed Load /40 °C cotton or synthetic fabrics
SpeedPerfect i, EcoPerfect ć, Reduced Ironing S,
Aqua Plus =;
different types of laundry can be washed together
Jeans 40 °C dark cotton and dark synthetic fabrics
SpeedPerfect i, EcoPerfect ć, Reduced Ironing S,
Aqua Plus =;
reduced rinse and final spin cycle
Delicate/Silk 30 °C
2 kg
for delicate fabrics, e.g., silk, satin, synthetic fibres or blended fabrics (e.g. curtains)
SpeedPerfect i, EcoPerfect ć, Reduced Ironing S,
Aqua Plus =: no spin between rinse cycles
ÿWool cold, 30 °C hand/machine washable wool
particularly delicate wash programme to avoid shrinkage of laun- dry; longer programme breaks (fabrics rest in the detergent solution)
Super Quick 15’ 630 °C synthetic cotton, linen, synthetic fibres or blended
fabrics
short programme of approx. 15 minutes, suitable for lightly soiled laundry
Additional programmes 2Rinse/ Spin , Drain >*reduced load with additional function SpeedPerfect i.
For programmes without prewash, add detergent to compartment II. For prewash programmes, distribute the detergent between compartments Iand II.
9201 / 9000734806
9000734806 WAQ283S0GB /...
Robert Bosch Hausgeräte GmbH
CarläWery Str. 34
81739 Munich / Germany
8
Safety instructions
– Carefully read the instruction manual and the information enclosed, and act accordingly.
– Keep the machine's documentation for future reference.
Risk of electric shock! – Never pull the cable to disconnect the mains plug!
– Never insert/disconnect the mains plug with damp hands.
Danger to life! For worn-out appliances:
– Disconnect the mains plug.
– Sever the mains cable and discard along with the plug.
– Destroy the lock on the washing machine door. This will prevent children from
locking themselves in and risking their lives.
Danger of suffocation! – Keep packaging, film and packaging parts out of the reach of children.
Risk of poisoning! – Keep detergents and care products out of the reach of children.
Risk of explosion! – Items of laundry pretreated with cleaning agents containing solvents, e.g. stain
remover/cleaning solvent may lead to an explosion after being loaded into the
washing machine.
Rinse items of laundry thoroughly by hand beforehand.
Risk of injury! – The washing machine door may become very hot.
– Be careful when draining hot detergent solution.
– Do not climb onto the washing machine.
– Do not lean on the open washing machine door.
– Do not reach into the drum if it is still rotating.
– Be careful when opening the detergent drawer while the machine is in operation.
Consumption values depending on model
Programme Load Electricity*** Water*** Programme
duration***
Cottons 30 °C* 8 kg 0.40 kWh 68 l 145 min
Cottons 40 °C* 8 kg 1.05 kWh 68 l 155 min
Cottons 60 °C* 8 kg 1.15 kWh 68 l 165 min
Cottons 90 °C 8 kg 2.30 kWh 80 l 155 min
Easy-Care 40 °C* 3.5 kg 0.64 kWh 55 l 103 min
Mixed Load 40 °C 3.5 kg 0.54 kWh 47 l 60 min
Delicate/Silk 30 °C 2 kg 0.19 kWh 34 l 41 min
Wool 30 °C* 2 kg 0.17 kWh 39 l 40 min
* Programme setting for testing in accordance with valid standard EN60456.
Note on comparative tests: For testing the test programmes, wash the specified load using the maximum spin speed.
Programme Additional
function Load Annual energy consumption
Annual water
consumption
Cottons40/60 °C EcoPerfect ć** 8/4 kg 179 kWh 8700 l
** Programme setting for testing and energy labelling in accordance with EU directive 2010/30/EU with cold water (15 ºC).
*** The values deviate from the indicated values depending on water pressure, hardness, and inlet temperature, ambient tem-
perature, type, amount and soiling of the laundry, detergent used, fluctuations in the power supply and selected additional
functions.
LFi$aa§³±§³Å§Éa§³µaaa§´©³¯aª¥a
>2>$ʑʑ$aʑaaaʑ$aʑaaʑʑSaaʑʑʑaʑLFʑʑaaʑaʑʑ2a

aLFićS=7IićS=/ićS=ićS=ićS=ÿ62>iä
ć
9
Care and cleaning
Before the first wash
Do not put laundry in the machine! Turn on the tap. Put into compartment II:
– approx. 2 litres of water
– detergent (measure according to the manufacturer's instructions for lightly soiled laundry and water hardness)
Turn the programme selector to Cottons LF60 °C,additional function SpeedPerfect iand press $Start/Reload.
At the end of the programme, turn the programme selector to Off.
Machine housing, control panel
– Remove detergent and cleaning agent residue.
– Wipe with a soft, damp cloth.
– Do not wash the machine with a jet of water!
Cleaning the detergent drawer ...
... if it contains detergent or fabric softener residues.
1. Pull out, press insert down and remove drawer completely.
2. To remove the insert: press upwards from below with your finger.
3. For models with insert for liquid detergent:Slide the insert upwards and remove it from the back.
4. Clean the detergent dispenser tray and inserts with water and a brush and dry them.
5. Attach the insert and engage (connect the cylinder to the guide pin).
6. Push in the detergent drawer.
Leave the detergent drawer open so that any residual water can evaporate.
Drum
Leave the washing machine door open so that the drum can dry out.
For rust stains, use chlorine-free cleaning agent, not steel wool.
Descaling Ensure there is no laundry in the machine!
This will not be necessary if the correct dosage of detergent is used. If it is, descale the appliance according to the
manufacturer's instructions. Descaling products can be acquired on the website or from customer services aInstallation
instructions.
Emergency release (e.g. in the event of a power cut)
The programme continues to run when the power has been restored. However, if the laundry has to be removed, the
washing machine door can be opened as follows:
Risk of scalding!
The detergent solution and laundry may be hot. Let it cool.
Do not reach into the drum if it is still rotating.
Do not open the washing machine door if water can be seen through the glass.
1. Turn the programme selector to Off and disconnect the mains plug.
2. Drain the detergent solution apage 10.
3. Pull the emergency release downwards with a tool and release.
The washing machine door can then be opened.
Information on the display panel depending on model
§:³±Close the washing machine door properly; laundry may be caught.
§:³Å,
§:ÉTurn on the (cold water) tap fully, supply hose kinked or trapped;
Clean the filter apage 10, water pressure too low.
§:³µ– Detergent solution pump blocked; Clean the detergent solution pump apage 10.
– Drainage hose / waste pipe blocked; Clean the drainage hose at the siphon apage 10.
– Heavy foam build-up apage 11, status indicator Wash flashes.
§:´Water in the base tub, appliance leaking. Call customer services!
©:³¯– Open the (hot water) tap fully.
– Inlet hose kinked/trapped.
– Water pressure too low. Clean the filter apage 10.
– Hot water hose not connected; appliance will operate using cold water only. Ignore information, only for first
wash cycle.
ª¥Childproof lock activated: to deactivate apage 5.
–Risk of electric shock! Disconnect the mains plug.
–Risk of explosion! Do not use solvents.
9
10
Maintenance
Detergent solution pump
Turn the programme selector to Off and disconnect
the mains plug.
1. Using a screwdriver or the insert for liquid detergent
(depending on model), open and remove the service flap.
2. Remove the folding gutter and place a large enough container underneath.
3. For models with a drainage hose: Remove the drainage hose from the retainer and pull it
from the housing.
Remove the sealing cap, allow the detergent solution to flow out into the container. Replace
the sealing cap and place the drainage hose in the retainer.
3* For models without a drainage hose: Carefully unscrew the pump cover 180° or until the
detergent solution begins to flow out on the folding gutter. When the container is full, close
the pump cover and empty the container. Repeat the above steps until all the detergent
solution has completely drained out.
4. Carefully unscrew the pump cover (there may be residual water).
5. Clean the interior, pump cover thread and pump housing (the impeller in the detergent
solution pump must rotate).
6. Replace the pump cover and screw it tightly.
7. Return the drainage hose (depending on model) and the folding gutter to their start position.
8. Place the service flap back on and close.
To prevent unused detergent from flowing straight into the drain during the next wash:
Pour 2 litres of water into compartment II and then start the Drain >programme.
Drainage hose at the siphon
Turn the programme selector to Off and disconnect the mains plug.
1. Loosen the hose clamp, carefully remove the drainage hose (residual water).
2. Clean the drainage hose and siphon connecting piece.
3. Reattach the drainage hose and secure the connection with the hose clamp.
Filter in the water supply
Risk of electric shock!
Do not immerse the Aqua-Stop safety device in water (contains an electric valve).
Reduce the water pressure in the supply hose:
1. Turn off the tap.
2. Select any programme (except 2Rinse/Spin // Drain >).
3. Choose $Start/Reload. Let the programme run for approximately 40 seconds.
4. Turn the programme selector to Off. Disconnect the mains plug.
Clean the filter:
5. Disconnect the hose from the tap.
Clean the filter using a small brush.
and/or for Standard and Aqua-Secure models:
Remove the hose on the rear of the appliance.
Remove the filter with pliers and clean.
6. Connect the hose and check for leaks.
–Risk of burning!
Allow the detergent solution to cool.
– Turn off the tap.
ʑʑ$aʑaaaʑ$aʑaaʑʑSaaʑʑʑaʑLFʑʑaaʑaʑʑ2a

aLFićS=7IićS=/ićS=ićS=ićS=ÿ62>iä
ćLFi$aa§³±§³Å§Éa§³µaaa§´©³¯aª¥a>2>$
11
What to do if...
ʑWater is leaking out – Attach/replace the drainage hose correctly.
– Tighten the screw connection of the supply hose.
ʑNo water supply.
Detergent not dispensed.
–$Start/Reload not selected?
– Tap not turned on?
– Filter blocked? Clean the filter apage 10.
– Supply hose kinked or trapped?
ʑThe appliance door will not
open.
– Safety function active. Programme stopped? apage 4.
–Rinse Hold (without final spin) selected? apage 3, 4.
– Can be opened by emergency release only? apage 9.
– Door locked after the washing machine is switched off: Switch on the washing
machine and wait for 5 seconds.
ʑThe selected programme does
not start.
–$Start/Reloador (Ready in) time selected?
– Washing machine door closed?
– Childproof lock active? Deactivate apage 5.
ʑDetergent solution is not
drained.
–Rinse Hold (without final spin) selected? apage 3, 4.
– Clean the detergent solution pump apage 10.
– Clean the waste pipe and/or drainage hose.
ʑNo water can be seen in the
drum.
– Not a fault. Water remains inside below the visible area.
ʑSpin result not satisfactory.
Laundry wet/too damp.
– Not a fault. Spin control system has stopped the spin cycle. Uneven distribution of
laundry.
Distribute large and small items of laundry evenly in the drum.
–Reduced Ironing Sselected? apage 5.
– Selected speed too low? apage 5.
ʑProgramme duration changes
suddenly during operation.
– Not a fault. The program time can vary according to the distribution of laundry, with
it therefore being possible for the display panel to show adjustments in the
duration.
ʑSpin cycle performed several
times.
– Not a fault. The balance control system has detected an imbalance and is
attempting to redress this by repeating the spin.
ʑResidual water in the
compartment for care products.
– Not a fault: the action of the care product is not affected.
– Clean the compartment if necessary apage 9.
ʑOdour formation in the washing
machine.
– Run programme Cottons LF90 °C without laundry. Use standard detergent.
ʑStatus display Wash flashing.
Appliance has detected a
detergent overload.
– Too much detergent used?
If foam is escaping from the detergent drawer: mix 1 tablespoon of fabric softener
with ½ litre of water and pour into compartment II (not with outdoor or down
fabrics).
– Reduce the detergent dosage for the next wash cycle.
ʑIntense noise formation,
vibrations and "wandering"
during the spin cycle.
– Are the appliance feet fixed?
Secure the appliance feet aInstallation instructions.
– Transportation safety devices removed?
Remove transportation safety devices aInstallation instructions.
ʑDisplay panel/indicator lamps
remain turned off while the
machine is working.
– Energy-saving mode apage 5.
– Power cut?
– Fuses triggered? Reset/change the fuse.
– If the fault occurs repeatedly, call customer services.
ʑProgramme sequence longer
than usual.
– Not a fault. Unbalanced load detection system adjusts imbalance by repeatedly
distributing the laundry.
– Not a fault: foam detection system active; adds an additional rinse cycle.
ʑDetergent residues on the
laundry.
– Occasionally, phosphate-free detergents contain water-insoluble residues.
– Select 2Rinse/Spin or brush out the laundry after washing.
If you cannot correct a fault yourself or if a repair is necessary:
– Turn the programme selector to Off and remove the mains plug from the socket.
– Turn off the water supply and call customer services aInstallation instructions.
Washing machine
en Instruction manual