BOSQ Aere 70 Inbuilt User manual

1
Instruction Manual
Aere 70/70S Inbuilt
It is important that you read this manual carefully before installing
and using your appliance
V20200916AL

2
For Carpenter – Zero Clearance box installer – refer to main Installation manual for full
instructions.
Dimensions for Zero Clearance box:
148mm
203mm
150mm
223mm
101mm
129mm
550mm
510mm
798mm
696mm
780mm
380mm

3
Zero Clearance Box Assembly: STAND INCLUDED

4
Stand Assembly:

5

6

7

8

9

10
Step 8:
Fitting the Flue
The flue is raised off the top of the ZCB and
the heater using these 2 brackets,
orientated like below. The bottom of the
bracket gets inserted into the ZCB.
The brackets are fixed to the 8” inner casing is
sealed into the top of the Zero Clerance box.
And the the upper folded U-shaped hook is
fixed to the 10” outer casing to keep it spaced
70mm off the ZCB. These can be fixed with
self-tapping screws or rivets.
The 8” galvanvised casing MUST be sealed
with a heat resistant fire cement, like the
flexible sealant Pioneer Fire Cement, around the top of the Zero Clearance box to stop
heater air coming into the chimney chase cavity.