Braun Group IPG2P2S User manual

USER GUIDE
PoE & Optical Transmission
IPG2P2S
Statement
!
Packing List
Please kindly check the following items:
1 x Industrial PoE switch
Power Kits(Need to order it separately)
1x User Guide/Warranty Card
Note
If any shortage or damage found, please contact us in time.
Product Overview Size and Panel Description
No part of this document may be reproduced, transmitted, transcribed, stored in a retrieval system, or trans-
lated into any language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical,
manual or otherwise without the prior written permission of our company.
Copyright @ 2002-2017 our company All Rights Reserved
All other trademarks mentioned in this document are owned by their respective owners. The information and
product specifications within this document are subject to change at any time, without notice and without
obligation to notify any person of such change. For reference only, assumes no responsibility for the statement
and information from this document.
Product Introduction
Note
Feature
!
This PoE switch features with 2x PoE Ethernet ports that comply with 10/100 BaseT(X),802.3af(PoE) and
802.3at(PoE+) + 2 Gigabit SFP interfaces. The power supply of single PoE port can be up to 30W. This switch
can offer power over Ethernet to network weatherproof IP camera with wipers and heater, high performance wire-
less AP, industrial VoIP phone or other PoE supported equipments, flexible for applications. SFP fiber optic port
transmission distance can be up to 120KM, with high resistance to electromagnetic interference.
/1000
Specially designed for harsh outdoor applications. Its 3KV network port surge protection can adapt to harsh outdoor
environment and ensure the reliability of the uninterrupted PoE system.
The product ‘Switch’ mentioned in the manual, if without a special request, it is referring to industrial IPG2P2S PoE Switch Series ,
PoE switch or switch in short in below.
Comply to IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.3ab, IEEE 802.3x, IEEE 802.1D,IEEE 802.3at, IEEE 802.3af, IEEE
802.1Q, IEEE 802.1p, IEEE 802.1x, IEEE 802.1W, IGMP standards;
2x 10/ 100M self-sensing RJ45 ports, support PoE power supply function;
All RJ45 ports support auto-flip (Auto MDI/MDIX);
Each PoE port can provide power up to 15.4W (af) or 30W (at);
Supply power for powered devices compatible with IEEE802.3af/at;
Support IEEE802.3x full duplex flow control and duplex backpressure flow control;
8G backplane bandwidth;
8K MAC address table;
Its 3KV network port surge protection can adapt to harsh outdoor environment;
Can full-load work under the temperature of -40 ~ +80 ˚ C;
2 1000M SFP fiber slot which is capable of high bandwidth and long distance transmission.
1Mbit buffer memory
B. RJ45 Port
A. System working Indicator
C. Uplink SFP Optical Port
110 mm
43 mm
80 mm
A
B
C

Indicator Description
!
Installation Guide
Please install to the supported devices.
Installation
Please confirm the following things before installation:
1. If the POE port meets the power requirement of the connecting devices.
2. If the POE standard requirement and power supply matches with the power receiving device
(½+, 3/6-( End -span)/ 4/5+, 7/8-(Mid-span))
3 .If the output power of the matched power adapter is compatible with the specification in the label of the POE switch
Please install the POE switch according to the following steps:
1. Put the PoE switch on the surface of a large and stable table, or professional industrial installation rank mount.
2. Connect Positive, Minus and Earth terminals as indicators on the power adapter.
3. Connect the network devices to the POE switch port though network cable.
1.Please do not put heavy products on the POE switch, and please ensure good ventilation environment for the POE switch.
2.Please cut off the power first before plugging the power adapter.
Power
Connect the power cable, plug it into power socket, turn on the power, then the switch will automatically initialize,
and LED lights status will display as following:
1 Except the POE port lights, all the other lights will go through the process of “on-off-on-off”, which means the system
restoration is successful.
2 Power LED remains lit.
If initialization is inconsistent with the above, please check the power.
Note
!Note
Application Connection Diagram Model Description
IPG2P2S: 4-port 2x 10/100 M PoE ports +2x Gigabit SFP ports,port 1 - 2
support PoE, compatible with both IEEE802.3af and IEEE802.3at,
,
industrial PoE switch with 1000 interface
auto-detect af/at devices. Max PoE port power is
30W. Rj45 ports transmission distance is 100M transmission distance of optic fiber port with SFP module can
be up to 2-120KM. Power adapter and SFP module is not included in this package, please order separately.
4-Port I ndustrial
PoE Switch
Industria l
Media Conver ter
Cat.5 Cab le
Cat.5 Ca ble
Cat.5 Cable
PoE (da ta+power)
：Note Please confirm that the all PoE ports of PD devices are complying with IEEE802.3af/at standard.
!
AC100~240V, 50/60Hz power supply;
Power Industrial Terminals: 48 (46 ~57V)VDC, More than 50VDC is recommended when used PoE+ output,
please use
Indicator Status Description
Power Indicator: SYS
Green LED ON
Normal
PoE Indicator: PoE
Link Indicator: Link
Green LED OFF Power OFF
Green LED ON Connected PD device, PoE working properly
Green LED Blink Short circuit or current overload
Green LED OFF No connected PD or PoE power OFF
Yellow LED ON Link is OK
Yellow LED Blink Link is OK and data is being sent and received.
Yellow LED OFF Link failure and No data transmission
Green LED ON
Green LED Blink
SFP Uplink Indicator
PoE Port: The PoE ports support PoE function, which can transmit data and power simultaneously if connected
matching device. The LED lights on the front panel can show working status of each port.
Green LED OFF
Link is OK and data is being sent and received.
Link is OK
Link failure and No data transmission
Ethernet Port: Besides PoE ports, other ports are normal self-sensing Ethernet RJ45 ports which support Auto
MDI/MDIX, plug and play. The LED lights on the front panel can show working status of each port.