Braun Silk-expert User manual

www.braun.com
Silk
•
expert
Type 6029 BD 5001
BD 5008
BD 5009
90795094/I-16
B
90795094_BD5001_B_S1.indd 190795094_BD5001_B_S1.indd 1 22.02.16 11:2622.02.16 11:26
Stapled booklet, 148 x 210 mm, 90 pages (incl. 6 pages cover),
Cover 4/4c, Content 2/2c = Pantone 876u + black
CSS APPROVED Effective Date 13Apr2016 GMT - Printed 27Sep2016 Page 1 of 90

English 4
Polski 12
Česk 21
Slovensk 29
Magyar 37
Hrvatski 45
Slovenski 53
Română (RO/MD) 61
Ελληνικά 70
Български 79
Braun GmbH
Frankfurter Straße 145
61476 Kronberg/Germany
www.braun.com
www.service.braun.com
UK/PL/CZ/SK/HU/HR/SI/RO/MD/GR/BG
Braun Infolines
UK 0800 783 7010
IE 1 800 509 448
PL 801 127 286
801 1 BRAUN
CZ 221 804 335
SK 02/5710 1135
HU (06-1) 451-1256
HR 091 66 01 777
SI 080 2822
RO 021.224.30.35
GR 210-9478700
90795094_BD5001_B_S2.indd 190795094_BD5001_B_S2.indd 1 22.02.16 11:2722.02.16 11:27
CSS APPROVED Effective Date 13Apr2016 GMT - Printed 27Sep2016 Page 2 of 90

8
7
5
9
10
3
2
6
I II III IV V VI
1
Skin
Tone
Hair
Colour
Î
Î
Î
Î
Î
Î
Î
Î
Î
Î
Î
Î
Î Î
Î
Î
Î
Î
Î
Î
Î
Skin tone & Body hair type chart:
==
Î
4
suitable / odpowiedni / vhodné /
vhodné / megfelelő / pogodno /
primerno / adecvat / κατάλληλο /
подходящ
not suitable / nieodpowiedni / použití není
vhodné / nevhodné / nem megfelelő /
nije pogodno / ni primerno / neadecvat /
ακατάλληλο / не е подходящ
90795094_BD5001_B_S3.indd 190795094_BD5001_B_S3.indd 1 22.02.16 11:2822.02.16 11:28
CSS APPROVED Effective Date 13Apr2016 GMT - Printed 27Sep2016 Page 3 of 90

4
English
Our products are designed to meet the highest standards of quality, functionality and design.
Using professional light technology, Braun Silk·expert Intense Pulsed Light (IPL) allows you to permanently
remove unwanted, visible hair comfortably at home. Before using the device, please read the use instructions
carefully, including all contraindications, warnings and safety information, and keep them for future reference.
This device has been designed to effect long-term hair growth reduction after a certain period of
treatment. Ideal body areas for use include:
Women: Legs, arms, underarms, bikini area and face (below cheek bones)
CAUTION: Do not use the device near the eyes and along the forehead.
Men: Shoulders and below (chest, back, arms, stomach, legs)
CAUTION: Do not use on the face, neck or genital area.
Usage on male beards or facial hair may lead to permanent or uneven results which may
produce changes in facial characteristics that may not be desirable.
Braun Silk·expert is not suitable for everyone. It is most effective on light to medium skin tones and dark hair
colors. Please, refer to the skin tone and hair color chart on page 3 to see if the device is suitable for you.
Description
1 Treatment window
2 SensoAdapt™ skin tone sensors
3 LED Power bars
4 Light intensity button with indicator light
5 Treatment button
6 Power socket
7 Power supply
8 Mains cord
9 Removable front with reflector
10 Glass filter
How does it work?
Braun Silk·expert works beneath the skin surface by targeting the melanin in the hair follicle, helping to
break the cycle of hair re-growth. With continued, periodic use, the light energy helps prevent unwanted
hair from reaching the skin surface.
The intelligent SensoAdapt™ skin sensors (2) continuously read your skin tone before every flash,
automatically adapting the light intensity for best efficacy and safety. This allows treatment of appropriate
skin tones, but prevents treatment if your skin tone is too dark.
CONTRAINDICATIONS
DO NOT USE the device …
• if your skin is darker than skin tone V shown on the skin tone chart on page 3.
Since dark skin absorbs more light energy, treating very dark skin may cause
discomfort/pain and adverse effects (e.g., burns, blisters, discoloration or
scarring) and injure your skin.
• if you are pregnant, lactating, or under the age of 18 as this device has not been
tested with these individuals.
• if you have a history of skin cancer or precancerous lesions (e.g., nevi or a large
number of moles).
90795094_BD5001_B_S4-90.indd 490795094_BD5001_B_S4-90.indd 4 14.03.16 10:1714.03.16 10:17
CSS APPROVED Effective Date 13Apr2016 GMT - Printed 27Sep2016 Page 4 of 90

5
• If your skin has been artificially or naturally tanned recently. Your skin may be
extra sensitive following sun exposure and particularly susceptible to side effects
of IPL treatment (e.g. burn, blister, discolour or scar to your skin). Also, avoid
unprotected exposure to direct sunlight after your IPL treatment. Your skin may
be extra sensitive and particularly susceptible to sunburn.
Certain conditions can also prohibit the use of this device.
DO NOT USE the device if any of the following applies:
• You have a chronic medical condition.
• You have a chronic skin disease (e.g. psoriasis or vitiligo) or damaged skin (e.g.
sunburn, cuts, open wounds or active infections) in the areas you wish to treat.
• You have varicose veins in the area you wish to treat.
• You have a known sensitivity to sunlight (photosensitivity) or are taking
medication that may make the skin more sensitive (e.g. Retin A, Accutane and/or
other topical retinoids).
• You have had a skin peel treatment on the area you wish to treat.
• You have any of the above, this device may injure your skin or make existing
conditions worse. You may experience side effects such as burns, blisters and
skin color changes (hyper- or hypo-pigmentation) or scarring.
If you are unsure whether this device is safe for you to use, please consult your
physician or dermatologist.
If you take any kind of medication regularly and over a long period of time, please
consult your physician for any potential impact on skin sensitivity to light.
WARNINGS
DO NOT USE on …
• scalp, eyebrows or anywhere near or around the eyes. Use in these areas may
permanently damage your eyes.
• red, very blonde, grey or white hair. The device is not effective on these hair
colors.
• nipples, genitals or around the anus. These areas may have a darker skin color
and/or greater hair density and using the device in these areas may cause
discomfort/pain or injure your skin.
• dark brown or black spots such as freckles, birthmarks, moles or warts in the
treatment area.
• a tattoo or permanent makeup in the treatment area.
• beard / facial hair for men.
DO NOT look directly into the glass filter (10) or attempt to activate the device
toward the eyes. To protect the safety of your eyes and those of individuals nearby,
the device will only activate when both skin tone sensors are placed against the
skin. If at any time the device activates when both sensors are NOT in contact with
the skin, STOP use immediately and contact your retailer.
DO NOT USE more than once a week on the same area. This will not speed up the
results and may increase the chances of injury to your skin.
90795094_BD5001_B_S4-90.indd 590795094_BD5001_B_S4-90.indd 5 14.03.16 10:1714.03.16 10:17
CSS APPROVED Effective Date 13Apr2016 GMT - Printed 27Sep2016 Page 5 of 90

6
PRECAUTIONS
• The device is intended for a single user.
• It is not intended for use by people under 18 years old.
• People with reduced physical, sensory or mental capabilities or lack of experience
and knowledge, may use the device if they have been given supervision or instruction
concerning the safe use of the device and understand the hazards involved.
• Children should be supervised to ensure that they do not play with the device.
Always keep the device out of children’s reach.
ELECTRICAL AND FIRE SAFETY
Regularly check the device and cords for visible signs of damage. In case of
damage or cracks, stop using the device. Electric shock may result from using a
damaged device. In case of defects, have the device checked and repaired by an
authorized service center. Unqualified repair work can lead to extreme hazards for
the user. Always unplug the device after use.
DANGER
Never attempt to repair and open the device, as this may expose you to dangerous
electrical components and to pulsed light energy, either of which may cause
serious bodily damage and/or permanent eye injury.
WARNING
To prevent any damage or risk of electric shock or fire hazard, operate this device
only by using the mains cord (8) and power supply (7) (CyDen Type
6027...) provided.
DO NOT use in or near water and wet surfaces such as bathtubs, showers,
basins or other vessels that may contain water. If the device becomes wet,
it should not be used. Electric shock may result from using a wet device.
DO NOT use if the device is damaged (e.g. cracked housing, cord damage etc).
Internal parts contain electric charges that are hazardous.
DO NOT use if the glass filter (10) is cracked or missing. Regularly inspect the
glass filter for damage.
DO NOT touch the glass filter during or directly after use since it will get hot.
DO NOT use petroleum-based or flammable cleaning agents (alcohol, acetones)
on the device as these pose a fire risk.
DO NOT use abrasive cleaning agents. These may damage the device or scratch
the glass filter.
DO NOT attempt to use this device other than for removing unwanted hair.
DO NOT activate the device onto any surface other than skin.
90795094_BD5001_B_S4-90.indd 690795094_BD5001_B_S4-90.indd 6 14.03.16 10:1714.03.16 10:17
CSS APPROVED Effective Date 13Apr2016 GMT - Printed 27Sep2016 Page 6 of 90

7
DO NOT activate the device if the treatment window (1) is not placed in full contact
with the skin.
DO NOT block the cooling vents. The device may overheat and pose an electric
shock risk or fire hazard.
HOW TO USE
Preparing the treatment area
Remove any visible hair on the skin before using the device. You may use your preferred hair removal
method. Ensure there is no hair remaining above the surface of the skin as this can damage the removable
front (9) and may cause treatment discomfort. Clean the treatment area and pat it dry.
To power on the device:
Plug the mains cord (8) into an electrical outlet. Plug the power supply (7) into the power socket (6).
The LED power bars (3) will light up once and, a fan starts running. This means the device is in READY
mode. During operation, the device will heat up slightly.
Light intensity button (4)
Normal setting: After plugging in, the device operates with full light intensity shown by a white
indicator light.
Gentle setting: Press button (4) in order to operate with reduced light intensity. The indicator light
shines blue.
Extra gentle setting: Press the button a second time: The light flashes blue.
To return to full power, press the button again.
Gentle and extra gentle settings are meant for sensitive areas and first time users. With reduced light
intensity, more treatments may be required to see the desired effects.
Automatic skin tone reading
When both skin tone sensors (2) have skin contact, the device reads your skin tone and selects the
appropriate light intensity which is indicated by white LEDs on the Power bars (3). These confirm that the
device is ready to flash.
light skin tone Uhigh light intensity
dark skin tone Ulow light intensity
no LEDs no skin contact Udevice cannot be activated
red LED invalid skin tone Udevice cannot be activated
Patch Test
Before your first treatment, we recommend you test your skin for reaction to Braun Silk·expert on a small
area of skin of the body part you plan to treat (about 2 x 3 cm in size; equivalent to the size of two flashes,
side by side).
Perform a patch test as described BELOW in chapter «TREATMENT MODES», section «Precision mode».
Wait 48 hours to examine the test area. If the skin appears normal, begin your first treatment. If a skin
reaction develops, discontinue using the device and consult your physician. Do not treat the patch tested
area for at least one week after the test.
90795094_BD5001_B_S4-90.indd 790795094_BD5001_B_S4-90.indd 7 14.03.16 10:1714.03.16 10:17
CSS APPROVED Effective Date 13Apr2016 GMT - Printed 27Sep2016 Page 7 of 90

8
TREATMENT MODES
Depending on the area you wish to treat you can choose between Gliding mode and Precision mode:
The gliding mode enables fast and efficient treatments and is recommended for large skin surface areas
(e.g. legs, arms, chest and back) while the precision mode is recommended for treating sensitive or small,
hard-to reach areas such as knees, shins, ankles, bikini line or underarm and face for females.
The area to be treated has to be hair-free, clean and dry. Before pressing the treatment button, look away
from the device to avoid the bright light.
Gliding mode Precision mode
1. Place the treatment window (1) firmly on your skin, ensuring both skin sensors (2) have skin contact.
Power bars (3) show white LEDs.
2. Press and hold the treatment button (5). The
device will begin to flash. 2. Press and instantly release the treatment button (5). The device will emit a flash.
3. Move the device slowly and continuously from
the bottom to the top of the treatment area.
Make sure to always keep full skin contact so
that the device flashes continuously.
3. Lift off the device and place it onto the next
adjacent spot to be treated. Again, wait for the
power bars to show white LEDs. Then press and
release the treatment button.
Once you have completed your first gliding stroke,
lift the device off the treatment area. Repeat steps
1 to 3 to treat the next adjacent area in a parallel
stroke.
Continue treatment spot by spot until you have
completed the entire area you wish to treat.
Make sure to avoid missed areas by placing the treatment window directly next to the previously treated
spot without leaving any space between treated areas.
If you feel intense pain, stop treatment immediately and consult your physician before using the device again.
Standby mode
After 10 minutes of inactivity, the device will revert to standby mode (which will be indicated by one blinking
light on the power indicator bars). To return to READY mode, press any key or remove/replace the power cord.
Sleep mode
If the device is not operated (no button push) for 60 minutes, it will enter sleep mode (low power state).
The Power bar LEDs are off. To return to READY mode, press any key or remove/replace the mains cord.
On wake-up the device will follow the standard Power on procedure (power bars will light up completely
once).
Facial treatment (female usage only)
Before Treatment
• Ensure you have done a patch test before treating the face (see chapter «Patch Test»).
• Remove any visible hair and cosmetics, lotions and creams from the area you wish to treat.
• You may choose to use a mirror to help position the treatment window on the face.
Treating the face, cheek and jaw (use the «Precision mode»)
Place the treatment window on your skin. Wait for the power bars to show white LEDs. Before pressing the
treatment button, close your eyes or look away to avoid the bright light. Avoid treating the same area twice
as this may increase the chance of producing adverse reactions.
90795094_BD5001_B_S4-90.indd 890795094_BD5001_B_S4-90.indd 8 14.03.16 10:1714.03.16 10:17
CSS APPROVED Effective Date 13Apr2016 GMT - Printed 27Sep2016 Page 8 of 90

9
Upper lip area
• Avoid contact with the lips and the nostrils. The central area below the nostrils is often sensitive.
• Do not use on permanent / semi-permanent lip liner on the lip margin.
• TIP: You can press your lips together to ensure that the light does not activate on the upper lip itself.
Neck and chin
Hair growth under the chin can be denser and coarser. This can sometimes lead to slight skin reddening
following a treatment. This redness is temporary and should completely disappear after 24 hours.
NOTE:
• If redness or a burning sensation occurs and lasts for several minutes, apply a cool cloth/pad to soothe
the area.
• If any pigment changes in the skin, e.g., lightening or darkening, are observed, stop using the device.
Seek medical advice to determine the cause which may be due to an underlying medical condition.
TREATMENT PLAN
Start-up phase 4 -12 weekly treatments
Maintenance treatment continue treating to your needs, e.g. once a month.
The typical hair growth cycle varies between individuals and could take up to 18 - 24 months depending on
body area (underarm, lower leg, bikini area). Since only hairs in their growing phase are susceptible to
treatment with light, it is important to do multiple treatments to achieve continuously smooth skin. For this
reason, we recommend a start-up phase of 4 -12 weekly treatments to achieve optimum results.
In case you no longer see hair growing, you do not need to complete the full 12 weekly treatments. You can
switch to the maintenance treatments.
AFTER TREATMENT
Once you have completed your treatment, unplug the power supply from the electrical outlet to turn off the
device.
The skin tone sensors (2) and the treatment window (1) should be inspected for damage and wiped down
with a dry, lint free cloth. If any marks or black spots are seen, clean them off straight away after treatment.
Do not touch or clean the glass filter (10) for at least 5 minutes after use to allow it to cool down.
After treatment, we recommend using sunscreen SPF 15 whenever treated areas may be exposed to the
sun. We recommend avoiding exposure to artificial light sources, such as tanning booths or solariums.
Avoid any activity or skin products that may irritate your skin for 24 hours after treatment. This includes
using hot tubs or saunas, wearing tight-fitting clothing, using bleaching creams, perfumed products or
peeling products. The above may cause irritation, such as itching and redness, in the treated areas.
MAINTENANCE AND STORAGE
• After use, wipe down the device and especially the treatment window with a dry, lint-free cloth. Do not
rinse or immerse the device in water or any other liquid.
• To ensure maximum performance, it is important to keep the treatment window reflector (9) free from
dirt, hair or other debris. To aid in the cleaning of this part, the front section is removable. Once
removed, it can be cleaned with a slightly damp cloth. Always ensure the front section is completely dry
before re-fitting it.
• Store the device in a cool, dry place. Make sure the treatment window and skin sensors are protected
from damage.
90795094_BD5001_B_S4-90.indd 990795094_BD5001_B_S4-90.indd 9 14.03.16 10:1714.03.16 10:17
CSS APPROVED Effective Date 13Apr2016 GMT - Printed 27Sep2016 Page 9 of 90

10
POSSIBLE SIDE EFFECTS
Some people will experience slight discomfort (e.g. heat or redness of the skin) when using the device –
this is normal. You may feel heat and tingling when activating the flash, followed by redness in the skin.
This type of reaction usually disappears within 24 hours. Adverse reactions are usually immediate or
appear within 24 hours. In rare cases, they may take up to 72 hours to appear. If you experience abnormal
skin reactions please contact your physician.
Side effect How to assess and react
Warm feeling or tingling sensations during
treatment which typically disappear after a few
seconds to a minute and decrease with continued
use.
This is expected and normal for all IPL treatments.
You can keep on using the device as instructed.
Discomfort or pain is intense during treatment or
persists after a treatment. Stop using the device and consult your physician before using it again.
Skin redness during or after treatment which
disappears within minutes to several hours. This is expected and normal for all IPL treatments. You can keep on using the device as instructed
once skin redness has disappeared.
Skin redness which does not go away within
24 - 48 hours after treatment. Stop using the device and consult your physician before using it again.
In very rare cases:
Swelling and redness around the hair follicle that
disappears within two or three days. You can keep on using the device as instructed once swelling and redness around the hair follicle
has disappeared.
Swelling and redness around the hair follicle that
does not disappear within two to three days. Stop using the device and consult your physician before using it again.
Temporary changes in skin color (lightening or
darkening). If your skin color changes, stop using the device and consult your physician.
Increase in hair growth in areas of treatment (more
likely to be seen with subjects of Mediterranean
descent).
If this increase persists over several treatments,
stop using the device and consult your physician.
TROUBLE SHOOTING
The following troubleshooting guide may help you solving initial problems you may experience with this
device.
Problem Solution
Power bars do not light up when treatment window
is placed on the skin. Make sure the device is connected to an electrical outlet and in Ready mode.
Ensure both skin tone sensors are in full contact
with the skin. If needed, move the device in a way
that both skin tone sensors get skin contact.
The device doesn’t work on small areas. Both skin tone sensors must be in contact with the
skin. If the area to be treated is too small or
curved, no valid skin tone can be read and the
device cannot be activated. Reposition the device
to ensure both sensors make contact with the skin.
On the power bar, only the first LED illuminates
red. Invalid skin tone reading. Your skin is either too light or too dark. For safety reasons, the device
cannot be activated.
First LED on power bars flashes white. The device has gone into STANDBY mode.
To reactivate, press any key.
90795094_BD5001_B_S4-90.indd 1090795094_BD5001_B_S4-90.indd 10 14.03.16 10:1714.03.16 10:17
CSS APPROVED Effective Date 13Apr2016 GMT - Printed 27Sep2016 Page 10 of 90