Bravo BV301H User manual

Range hoods
BV301H
BV302H
BV303H
BV361H
BV362H
User Manual Instructions
Installation Instructions
BV301H/361H BV302H/362H BV303H

Fig.1
Fig.2 Fig.3
Fig.4 Fig.5

Fig.6 Fig.7
Fig.8 Fig.9
Fig.10 Fig.11
Fig.12 Fig.13
Fig.14

Fig.15 Fig.16
Fig.17 Fig.18
Fig.19
Fig.20

GENERAL
Carefully read the following important information regarding installation
safety and maintenance. Keep this information booklet accessible for further
consultations. The appliance has been designed for use in the ducting
version (air exhaust to the outside – Fig.1B), filtering version (air circulation
on the inside – Fig.1A) or with external motor (Fig.1C).
SAFETY PRECAUTION
1. Please take note that when the cooker hood is operating simultaneously
with an open fireplace or burner that depend on the air in the environment,
the cooker hood may removes the air from the environment which a burner
or fireplace need for combustion. The negative pressure in the environment
must not exceed 4Pa (4x10-5 bar). Provide adequate ventilation in the
environment for a safe operation of the cooker hood. Follow the local laws
applicable for external air evacuation.
Before connecting the model to the electricity network:
- control the data plate (positioned inside the appliance) to ascertain that the
voltage and power correspond to the network and the socket is suitable. If in
doubt please ask qualified electrician for help.
2. WARNING!
In certain circumstances electrical appliances may be a danger hazard.
A) Do not check the status of the filters while the cooker hood is operating
B) Do not touch bulbs or adjacent areas, after prolonged use of the lighting
installation.
C) Flambe cooking is prohibited underneath the cooker hood
D) Avoid free flame, as it is damaging the filters and can cause fire hazard
E) Constantly check food frying, the overheated oil may become a fire
hazard
F) Disconnect the electrical plug prior to any maintenance.
G) There shall be adequate ventilation in the room when the range hood is
operating
H) There is a risk of fire if cleaning is not carried out in accordance with the
instructions
I) If the supply cord is damaged, it must be replaced by the manufacturer , its
service agent or similarly qualified person s in order to avoid a hazard.