BRAVUR CHRONOGRAPH Series User manual

WELCOME TO TH

WELCOME TO TH

E BRAVUR FAMILY

E BRAVUR FAMILY

Thank you for chosing a watch from
Bravur!
Your watch has been designed,
assembled and tested in Sweden,
with the greatest care and attention
to details.
We hope you will enjoy your new
watch for many years to come!
Kind regards,
Magnus & Johan, founders
THANK YOU!

CONTENTS
9 Setting the Time &
Chronograph Functions
15 Care & Maintenance
21 Specifications
27 Measurements
31 Warranty
35 Contact information

SETTING THE TIME
&
CHRONOGRAPH
FUNCTIONS
9

9
2 1
4
7
8
53
6
A B

1 Minute hand
2 Hour hand
3 Running seconds
460 seconds chronograph
5 15 minute counter
612 hour counter
7Chronograph start/stop
pusher
8Chronograph reset pusher
9 Crown with two positions
11

Setting the time
1. Gently pull out the crown (9) to
position B to move the hour and
minute hands.
2. Turn the crown clockwise or
counterclockwise to set the correct
time. Note that the second hand
stops in this position.
3. After setting the time, push the
crown back to position A for normal
use and water protection.
In case your watch has stopped after
not being used for a period of time,
it’s recommended to manually
wind it to start. This is done with the
crown in position A.
The crown should be turned
clockwise, seen from the side,
approximately 15-20 turns.

Chronograph function
1. Use the upper push button (7)
to start and stop the chronograph.
2. The center chronograph
hand (4) runs when started,
and minutes and hours are
counted on sub-dials (5 and 6).
3. Press the lower push button (8)
to reset the chronograph
13

CARE
&
MAINTENANCE
15

15
Please follow these guidelines to
get the best performance from your
watch.
Movement
If the watch is worn for 12 or more
hours daily, the automatic rotor
winds the movement, eliminating
the need for manual winding. In
case the watch has stopped due to
non-use, it’s advisable to manually
wind it using the crown in position
A. Rotate the crown clockwise
approximately 15-20 turns.
Please note that regular daily
wear may not fully wind the
movement, and a 62-hour power
reserve cannot be guaranteed.
For individuals with a sedentary
lifestyle, manual winding may be
necessary to ensure the watch stays
operational.

The accuracy stated in the
specifications section may change
over time. As a mechanical watch,
quartz watch accuracy cannot be
expected.
Magnetic fields
Avoid exposing your watch to strong
magnetic fields, such as those
generated by X-ray machines and
loudspeakers, as it can magnetize
the watch movement, negatively
affecting its performance and
accuracy.
Shocks
Avoid exposing your watch to
mechanical and thermal shocks as
it may damage the delicate moving
parts of the watch.
17

17
Service
Your watch consists of hundreds of
small parts and needs occasional
service to maintain its performance
and accuracy. Full service is advised
every 4-5 years.
Service should be performed by an
approved watch maker or sent to a
Bravur service center. Contact us
for more information.
Cleaning
You may use a damp cloth to clean
your watch. A tooth brush and some
water with mild detergent may be
used for a more serious cleaning.
Prevent the leather strap from
coming in contact with moisture.
Water resistance
Your watchistestedtoresist10ATM
of static pressure in a controlled
environment when new. Please
note that this is not equivalent to
water resistance. 10 ATM means

it’s suitable for swimming but not
scuba diving. The optional leather
strap is not suitable for swimming.
Gaskets and seals should be
inspected and replaced regularly
by a watchmaker to maintain full
water resistance.
Note that the crown must be in
position A to be protected from
water and the chronograph
function must not be operated.
Leather strap (optional)
Avoid letting leather straps come in
contact with water, as it will shorten
their lifespan.
19