BreathableBaby Breathable Mesh 3-in-1 Convertible Crib User manual

Breathable™ Mesh 3-in-1 Convertible Crib
Style #:
Lot:
Date:
Customer Care:
Email: [e-mail]
BreathableBaby, LLC.
600 Highway 169 South, Suite 800
St. Louis Park, MN 55426
Phone: [phone]
This product is not intended for institutional or commercial use.
Read all instructions before assembly and use.
KEEP INSTRUCTIONS FOR FUTURE USE.
ADULT ASSEMBLY REQUIRED
Due to the presence of small parts during assembly,
keep out of reach of children until assembly is complete.
© 2020 BreathableBaby, LLC
#####
___
PO #
________
___________
MM/YYYY
Ages 0–24 months
(or 35" tall) for crib
To register your product for important safety alerts and updates to your product please visit
breathablebaby.com/registration
Please do not return this item to the store before contacting us about missing parts or with any questions.
Care and Cleaning:
Do not scratch or chip the finish. Do not use abrasive chemicals for cleaning.
Clean wood or mesh with mild soap on a soft rag. Wipe again with clean water and let dry thoroughly.
If you ever refinish this furniture, be sure to use only a non-toxic finish specified for children’s products.
As with all your fine furniture, blot up spills immediately.
If optional legs are not used, use pad underneath crib to prevent scratches to floor.
Can be converted to toddler bed with
additional purchase of toddler bed rail. Call
BreathableBaby for purchase information.

CAUTION
WARNING
ANY MATTRESS USED IN THIS CRIB SHALL BE AT
LEAST 27 1/4 BY 51 5/8 IN. WITH A THICKNESS
NOT EXCEEDING 6 IN.
• Infants can suocate on soft bedding. Never add a pillow or comforter. Never place additional
padding under an infant.
• Failure to follow these warnings and the assembly instructions could result in serious injury or
death. DO NOT use this crib if you cannot exactly follow the accompanying instructions.
• To reduce the risk of SIDS, pediatricians recommend healthy infants be placed on their backs to
sleep, unless otherwise advised by your physician.
•Strangulation Hazard: STRINGS CAN CAUSE STRANGULATION! Do not place items with a string
around a child’s neck, such as hood strings or pacier cords. Do not suspend strings over a crib or
attach strings to toys.
•Strangulation Hazard: To help prevent strangulation tighten all fasteners. A child can trap parts of
the body or clothing on loose fasteners.
•Strangulation Hazard: Do not place crib near window or patio door where cords from blinds or
drapes may strangle a child.
•Fall Hazard: When child is able to pull to a standing position, set mattress to lowest position and
remove bumper pads, large toys and other objects that could serve as steps for climbing out. This
crib has an adjustable mattress support. For the convenience of the parent when the baby is very
small, the mattress support may be used in the highest position.
•Fall Hazard: Stop using crib when child begins to climb out or reaches a height of 35 in. (89 cm),
whichever occurs rst.
• Check this product for damaged hardware, loose joints, loose bolts or other fasteners, missing parts,
torn mesh/fabric, or sharp edges before and after assembly and frequently during use. Securely
tighten loose bolts and other fasteners. Do not use crib if any parts are missing, damaged or broken.
Contact BreathableBaby Customer Care for replacement parts and instructional literature if needed.
Do not substitute parts.
• Follow warnings on all products in a crib.
• If renishing, use a non-toxic nish specied for children‘s products.
•Never use plastic shipping bags or other plastic lm as mattress covers because they can cause
suocation.
• Infants can suocate in gaps between crib sides and a mattress that is too small.
• Ensure a safe environment for the child by checking regularly, before placing the child in the crib,
that every component is properly and securely in place.
• To avoid head injury, do not allow any child to play underneath the crib.
•Never add an accessory such as a bassinet or changing table that extends over the sleeping area.
•In Canada Only – Use a crib mattress that is no thicker than 15 cm and is of such a size that, when it
is pushed rmly against any side of the crib, it does not leave a gap of more than 3 cm between the
mattress and any part of the sides of the crib. Do not use this crib for a child who can climb out of it
or who is taller than 90 cm.
© 2020 BreathableBaby, LLC. 600 HIGHWAY 169 SOUTH, SUITE 800, ST. LOUIS PARK, MN 55426 USA 877-827-4442
[e-mail]

Assembly Instructions
Upper Level:
Mattress in top position.
Move to bottom position
when infant begins to push
up on hands and knees,
can roll over or has reached
20 lbs., whichever comes first.
UPPER LEVEL
MATTRESS
Lower Level:
Mattress in bottom position.
Discontinue use of the product
when child is able to climb out
or reaches the height of 35 in.
Page 1
LOWER LEVEL MATTRESS

Required Tools:
No drills necessary.
Do not use power
screwdriver.
DO NOT USE IF ANY PART IS BROKEN, TORN, OR MISSING.
CONTACT BREATHABLEBABY CUSTOMER CARE IN THAT EVENT.
Allen Wrench supplied
For every bolt, be sure to
hand tighten snugly but
DO NOT over-tighten.
Page 2
Parts List 1 of 2

Page 3
Parts List 2 of 2

Attach (Part A) Back Mesh Rail and (Part B) Left Solid
End with 4 (Part 1) Long Bolts and 4 (Part 4) Lock
Washers. Attach (Part A) Front Mesh Side Rail also
with 4 (Part 1) Long Bolts and 4 (Part 4) Lock
Washers. Attached (Part B) Right Solid End to both
(Part As) with 8 (Part 1) Long Bolts and 8 (Parts 4)
Lock Washers. Tighten all bolts with Allen Wrench
(Part 5).
WARNING: For the mesh panels, make sure the
side with the middle support bar is installed facing
out and on the outside of the crib. The side with flat
mesh only should be on the inside facing child.
For the solid end panels, make sure the side with the
indented panel is facing out and the flat side facing
in toward the child.
Page 4
Step 1
A
B
AB
This bar on outside of crib
Wide bar at bottom
Indented side
on outside

For Upper Level Mattress Only: Attach the metal
Mattress Base (Part C) to the top 4 holes aligned on the inside
of the end panels. Attach the Mattress Base (Part C) in all
corners using 1 (Part 2) Short Bolt and 1 (Part 4) Lock Washer
in each corner. Tighten the 4 bolts total with the Allen
Wrench (Part 5).
Page 5
Step 2A
For Upper Level Mattress Base
WARNING: Move to Lower Level when infant
begins to push up on hands and knees, can roll
over or has reached 20 lbs., whichever comes first.
Upper Level
Option #1– For Upper Level Mattress Base Position
The WARNINGS printed on the envelope attached to the mattress support must face up,
the springs must face up. This crib has (2) adjustment positions, use the highest only
for newborns.

Step 2B (Only if assembly directly to Lower Level Mattress)
For Lower Level Mattress Base Page 6
Option #2 – For Lower Level Mattress Base Position
WARNING: Discontinue use of this
product when child is able to climb out
or reaches the height of 35 in.
Lower Level
The WARNINGS printed on the envelope attached to the mattress support must face up,
the springs must face up. This crib has (2) adjustment positions, use the highest only
for newborns.
For Lower Level Mattress Only: Attach the metal
Mattress Base (Part C) to the bottom 4 holes aligned on the
inside of the end panels. Attach the Mattress Base (Part C) in
all corners using 1 (Part 2) Short Bolt and 1 (Part 4) Lock
Washer in each corner. Tighten the 4 bolts total with the
Allen Wrench (Part 5).

Leg Attachment – Optional
Page 7
Helpful Hint:
Get a second person to help flip
crib over.
Place crib upside down. Attach 4x (Part D) Legs to holes
on bottom of both (Part B) Solid Ends. Attach each leg with
2 (Part 3) Medium Bolts and 2 (Part 4) Lock Washers. Tighten
the 8 bolts total with Allen Wrench (Part 5).
Turn crib upright. Be careful not to put too much
pressure on legs while turning over.
Enjoy your Breathable™ Mesh Convertible . Crib
WARNING: If optional legs are not used, store legs and all
extra hardware somewhere safely out of reach of child.
If optional legs are not used, use pad underneath crib to protect floor from damage.
WARNING: Make sure legs are installed
slanted to the outside of the crib.
Legs slanted to outside
of crib
Step 3

KEEP INSTRUCTIONS FOR FUTURE USE.
RETURN TO STORAGE ENVELOPE ON MATTRESS PLATFORM WHEN NOT IN USE.