Breezeboard Pro Buggy User manual

Instruction
Manual
For use with Breezeboard PRO models:
Available online and in the app store:

How to build your buggy...
General Safety Information
OK,
lets
build
your
buggy...
Please check the contents of your box before beginning
to build your Breezeboard PRO Buggy...
1 Seat (1)
2 Arms (2)
3 Arm Holders (2)
4 Velcro Straps (2)
5 Seat Platform (1)
6 Chassis Extender (1)
7 Rubber Protector Pads (4)
8 Short Screws (4)
9 Long Screws (4)
10 Nuts (4)
11 Spanner (1)
12 Allen Key (1)
CONTENTS
Need Help? We’ve made a “Build your buggy” video guide for you...
Please visit: www.breezeboardpro.com/knowledge-base/ to view it.
12
10
11
8
7
6
5
4
3
2
1
9
Chassis
Length
Adjustment
Screw
Washers
and bolts
Foot Pad
Length
Adjustment
Screws
Attach the 4 Rubber
Protector Pads to end
of Arm Holders.
Add Chassis Extender to
the Seat Platform
adjust to the correct
length then tighten
using the Chassis Length
Adjustment Screw.
Use the 4 Long Screws
to attach the Arms to the
Arm Holders & secure in
place using the 4 Nuts with
the Spanner &Allen Key.
Please ensure Nut is on
the outside.
Nut
Flip the buggy back over
and tighten the Foot
Pad Length Adjustment
Screws for each side
to complete your
Breezeboard PRO buggy.
Note: If the item is not assembled following the above instructions
there could be risks of accident. Users ride at their own risk.
Add Velcro Straps
to the Arm Holders
through the Rubber
Protector Pads.
With buggy upside
down, add your
Breezeboard PRO to
Seat Platform and
tighten Velcro Straps.
1
5
2
6
3
7
4
Learn to ride in a safe place on at ground and away from obstacles. Stop completely before getting off. Ride on even ground. Ride in a
safe and responsible manner. Do not attempt wheelies or tricks that could result in injury. Be aware of pedestrians, obstacles and uneven
ground. Keep your Breezeboard PRO and Buggy clean, dry and free from debris. Be patient and take the time to practice before you ride
in a congested environment. Be considerate to others when using your Breezeboard PRO & Buggy. Please make sure you wear a helmet,
protective clothing such as elbow pads, knee pads and wrist guards and also gloves to protect your hands and ngers when riding.
Don’t ride through puddles. Don’t allow untrained riders to ride your Breezeboard PRO Buggy. Don’t ride in a careless manner as serious
injury could occur from misuse or worse you could break your Breezeboard PRO Buggy. Don’t ride on sand or mud, it wont handle and
we dont advise it. Don’t ride at full speed for prolonged periods as this can make it difcult for the Breezeboard PRO Buggy to maintain
balance as well as cause unnecessary strain on the Breezeboard PRO components as well as risk your safety. It is not designed for high
speeds. Only one person on the buggy at any one time. Please take your time to understand the controls of the Breezeboard PRO when
the buggy is attached. Maintain safe stopping distances at all times. Maximum load 150kg. Users ride at their own risk.
Add Seat to the Seat
Platform using the 4 Short
Screws. No nuts required.
Tighten using the Allen Key.
Breezeboard PRO Limited, Unit 4 Chillfactore, Trafford Quays Leisure Village, Trafford Way, Manchester M41 7JA
Model: Buggy-01 Year of Manufacture: 2017 More information at: www.breezeboardpro.com
Before sitting on the buggy make sure
the Breezeboard PRO is switched OFF.
After that sit on the seat making sure
you are in a comfortable position.
Then raise the arms to the neutral
position where the breezeboard is set
horizontal to the ground. Then switch
on the Breezeboard and you are ready
to go! Always read the General Safety
Information rst before riding and
learn controls in a wide open space.
CONTROLS:
Push both handle bars down
to go forward.
Pull both handle bars back to
slow down, stop or reverse.
To turn, push one side down.
How to ride!